Keys and doors
2-13
– CONTINUED –
2. Make sure that the keyless entry system properly
operates by operating each transmitter.
Deleting old transmitter codes
The control unit of the keyless entry system has four
memory locations to store transmitter codes, givingit the ability to operate with up to four transmitters.
When you lose a transmitter, the lost transmitter ’s
code remains in the memory. For security reasons,
lost transmitter codes should be deleted from the
memory.
To delete old transmitter codes, program four trans-
mitter codes into the system. If you have only one
current transmitter, program it four times. If you have
two current transmitters, program each one twice. If
you have three current transmitters, program two of
them once and the third one twice. This process will
leave only current transmitter codes in the system ’s
memory.
NOTE
Make sure no one else is operating their keyless entry system within range of your vehicle whenprogramming transmitters. If someone else wereto operate their remote transmitter while you areprogramming your transmitters, it is possiblethat their transmitter code will be programmed into your system, allowing them unauthorized access to your vehicle.
Instruments and controls
3-30
lanes. Use the inside mirror (or glance back- wards) to determine the actual size and dis-
tance of objects that you view in convex mir-
ror.
Remote control mirror switch
1) Selection switch
2) Direction control switch
The remote control mirrors operate only when the
ignition switch is in the “ON” or “ACC” position.
1. Press either end of the selection switch, “L” for
the left, “R” for the right.
2. Move the direction control switch in the direction you want to move the mirror.
3. Return the selection switch to the neutral position
to prevent unintentional operation.
The mirrors can also be adjusted manually.
Outside mirror defogger (if equipped)
1) OFF
2) ON 3) Push
The outside mirror defogger shares the switch with
rear window defogger.
The outside mirror defogger operates only when the
ignition switch is in the “ON” position.
To turn on the outside mirror defogger, push the
switch. To turn it off, push the switch again. The indi-
Specifications
12-6
Fuses and circuits Fuse panel located behind the coin trayFuse panelFuse ratingCircuit
115A Heater fan
215A Heater fan
315A Power door lock
Remote keyless entry
420A Cigarette lighter
Remote controlled rear view mirrors
510A Tail light
Parking light
615A SRS airbag
715A Fog light
820A ABS solenoid
915A Radio
10Empty
1115A Engine ignition sys- tem
SRS airbag
AT control system
