2003 SUBARU IMPREZA lock

Seat, seatbelt and SRS airbags
1-3
– CONTINUED –
restraint devices) sit in the REAR seat properly
restrained at all times in a child restraint device
or in a seatbelt, whichever is appropriate for
the child’s age, height and weight. Secure ALL
types of child restraint devices (including for-
ward facing child seat) in the REAR seats at all times.
NEVER INSTALL A REARWARD FACING CHILD
SEAT IN THE FRONT SEAT. DOING SO RISKS
SERIOUS INJURY OR DEATH TO THE CHILD
BY PLACING THE CHILD ’S HEAD TOO CLOSE
TO THE SRS AIRBAG.
According to accident statistics, children are
safer when properly restrained in the rear seat-
ing positions than in the front seating posi-
tions. For instructions and precautions con-
cerning child restraint systems, see the “Child
restraint systems ” section in this chapter.
Fore and aft adjustment
Pull the lever upward and slide the seat to the de-
sired position. Then release the lever and move the
seat back and forth to make sure that it is securelylocked into place.

Seat, seatbelt and SRS airbags
1-4
Reclining the seatback
Pull the reclining lever up and adjust the seatback to
the desired position. Then release the lever and
make sure the seatback is securely locked intoplace.
The seatback placed in a reclined position can
spring back upward with force when released.
When operating the reclining lever to return the seat- back, hold it lightly so that it may be raised back
gradually.WARNING
To prevent the passenger from sliding under the seatbelt in the event of a collision, alwaysput the seatback in the upright position whilethe vehicle is in motion. Also, do not place
objects such as cushions between the pas- senger and the seatback. If you do so, the risk of sliding under the lap belt and of the lap belt
sliding up over the abdomen will increase,and both can result in serious internal injuryor death.

Seat, seatbelt and SRS airbags
1-12
1. Lower the headrests.
2. Unlock the seatback by pulling the release knoband then fold the seatback down.
To return the seatback to its original position, raise
the seatback until it locks into place and make sure
that it is securely locked.
WARNING
After returning the rear seat to its original
position, be certain to place all of the seat- belts and the tab attached to the seat cushion
above the seat cushion. And make certain thatthe shoulder belts are fully visible. Never allow passengers to ride on the
folded rear seatback or in the cargo area. Do-ing so may result in serious injury or death. Secure lengthy items properly to prevent
them from shooting forward and causing seri-
ous injury during a sudden stop. Seatbelts
Seatbelt safety tips
WARNING
All persons in the vehicle should fasten
their seatbelts BEFORE the vehicle starts to
move. Otherwise, the possibility of serious in- jury becomes greater in the event of a sudden stop or accident. All belts should fit snugly in order to pro-
vide full restraint. Loose fitting belts are not
as effective in preventing or reducing injury. Each seatbelt is designed to support only
one person. Never use a single belt for two ormore persons — even children. Otherwise, in
an accident, serious injury or death could re-sult. Replace all seatbelt assemblies including re-
tractors and attaching hardware worn by oc- cupants of a vehicle that has been in a serious
accident. The entire assembly should be re-
placed even if damage is not obvious. Put children aged 12 and under in the rear
seat properly restrained at all times. The SRSairbag deploys with considerable speed and force and can injure or even kill children, es-

Seat, seatbelt and SRS airbags
1-14
Expectant mothers
Expectant mothers also need to use the seatbelts.
They should consult their doctor for specific recom-
mendations. The lap belt should be worn securely
and as low as possible over the hips, not over thewaist. Emergency Locking Retractor (ELR)
The driver ’s seatbelt has an Emergency Locking Re-
tractor (ELR).
The emergency locking retractor allows normal
body movement but the retractor locks automaticallyduring a sudden stop, impact or if you pull the belt very quickly out of the retractor.
Automatic/Emergency Locking Retractor (A/ELR)
Each passenger ’s seatbelt has an Automatic/Emer-
gency Locking Retractor (A/ELR). The Automatic/
Emergency Locking Retractor normally functions asan Emergency Locking Retractor (ELR). The A/ELR
has an additional locking mode “Automatic Locking
Retractor (ALR) mode ” intended to secure a child
restraint system. When the seatbelt is once drawn
out completely and is then retracted even slightly,
the retractor locks the seatbelt in that position and
the seatbelt cannot be extended. As the belt is re-
winding, clicks will be heard which indicate the re-
tractor functions as an ALR. When the seatbelt is re-
tracted fully, the ALR mode is released.
When securing a child restraint system on the rear seats by the use of the seatbelt, the seatbelt mustbe changed over to the Automatic Locking Retractor (ALR) mode.
When the child restraint system is removed, make
sure that the seatbelt retracts fully and the retractor
returned to the Emergency Locking Retractor (ELR)mode.
For instructions on how to convert the retractor to

Seat, seatbelt and SRS airbags
1-16
WARNING
Never place the shoulder belt under the arm or behind the back. If an accident occurs, this
can increase the risk or severity of injury.
CAUTION
Metallic parts of the seatbelt can become very hot in a vehicle that has been closed up insunny weather; they could burn an occupant.Do not touch such hot parts until they cool.
Front seatbelts
1. Adjust the seat position:
Driver’ s seat: Adjust the seatback to the upright
position. Move the seatback as far from the steering
wheel as practical while still maintaining full vehicle
control.Front passenger ’s seat: Adjust the seatback to the
upright position. Move the seat as far back as pos-sible.
2. Sit well back in the seat.
3. Pick up the tongue plate and pull the belt out
slowly. Do not let it get twisted. If the belt stops be-
fore reaching the buckle, return the belt slightly and
pull it out more slowly. If the belt still cannot be
unlocked, let the belt retract slightly after giving it a
strong pull, then pull it out slowly again.

Seat, seatbelt and SRS airbags
1-18
nAdjusting the front seat shoulder belt anchor height
The shoulder belt anchor height should be adjusted to the position best suited for you.
To lower the anchor height, push the release buttonand slide the anchor down.
To raise the anchor height, slide the anchor up. Pull
down on the anchor to make sure that it is locked inplace.
Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without
touching the neck.
WARNING
When wearing the seatbelts, make sure the
shoulder portion of the webbing does notpass over your neck. If it does, adjust the
seatbelt anchor to a lower position. Placing the shoulder belt over the neck may result in
neck injury during sudden braking or in a col-lision.
n Unfastening the seatbelt
Push the button on the buckle.
Before closing the door, make sure that the belts are

Seat, seatbelt and SRS airbags
1-19
– CONTINUED –
retracted properly to avoid catching the belt web-
bing in the door.
Rear seatbelts (except rear center seatbelt on
Wagon)
1. Sit well back in the seat.
2. Pick up the tongue plate and pull the belt out
slowly. Do not let it get twisted. If the belt stops be-
fore reaching the buckle, return the belt slightly and
pull it out more slowly. If the belt still cannot be
unlocked, let the belt retract slightly after giving a
strong pull on it, then pull it out slowly again.3. Insert the tongue plate into the buckle until you hear a click.
4. To make the lap part tight, pull up on the shoul- der belt.
5. Place the lap belt as low as possible on your hips, not on your waist.

Seat, seatbelt and SRS airbags
1-20
nAdjusting the rear seat shoulder belt anchor height (window-side seating positions only)
The shoulder belt anchor height should be adjusted
to the position best suited for you. To adjust the an-
chor height, push the release button and slide the
anchor up or down. Pull down on the anchor to
make sure that it is locked in place.
Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without
touching the neck.
WARNING
When wearing the seatbelts, make sure the
shoulder portion of the webbing does notpass over your neck. If it does, adjust the
seatbelt anchor to a lower position. Placing the shoulder belt over the neck may result in
neck injury during sudden braking or in a col-lision.
n Unfastening the seatbelt
Push the button on the buckle.