2003 SUBARU BAJA roof

2-32
gency”. Sun shade
OM-H2355
The sun shade can be slid forward or backward by hand while the
moonroof is closed.
If the moonroof is opened, the sun shade also moves back.

6
Interior and exterior equipments Interior light6-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dome light 6-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Map light 6-3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sun visors 6-3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vanity mirror 6-4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage compartment 6-4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Glove box 6-5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Center console 6-5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear center console 6-6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Coin compartment 6-6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear quarter storage box 6-7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cup holder 6-7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cigarette lighter socket 6-9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ashtray 6-12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Convenience hook 6-12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Coat hook 6-12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cargo net hooks 6-13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Floor mat (if equipped) 6-14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cargo bed 6-15
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cargo tie-down hooks 6-16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bed extender (if equipped) 6-17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cargo lamp 6-20
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bed cover (if equipped) 6-21
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Roof rail and crossbar 6-23
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sport activity lights (if equipped) 6-29 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Interior and exterior equipments6-21
–
CONTINUED –
Bed cover (if equipped)
The bed cover is designed to cover the cargo area of the bed. The bed
cover is water resistant, but not waterproof.
CAUTION
Do not place cargo on top of the bed cover.
Do not use the hard bed cover section as a step.
Do not use the bed cover to secure cargo.
To avoid damage, clean the bed cover with only soap, water
and a soft brush. Remove the soft portion of the bed cover before taking the ve-
hicle through a car wash.
Securing the cover
HB6034BA
HB6033AA
To secure the soft portion of the bed cover to the bed, simply start
from either side of the vehicle and place the plastic strip under the
rail. Slide your hand down the side of the vehicle pushing the plastic
strip under the rail as you go. Continue this around the entire length of
the bed. Fasten both closeout wraps with Velcro around the rear
chrome bars so that they are secure. Your cover should be tight and
ready to conceal items in the bed from view.

Interior and exterior equipments6-23
–
CONTINUED –
HB6038BA
As you insert (and pull) the soft portion of the bed cover into the bed
cover’s hard section, make sure the next 10 to 15 inches (250 to 380
mm) of the soft portion are straight and ready to enter the flared out
portion of the hard section.
Once you have pulled the soft portion of the bed cover onto the bed
cover’ s hard section, make sure the soft portion is equally centered on
both sides. To complete the installation, refer to “Securing the cover ”.
Roof rail and crossbar
CAUTION
For cargo carrying purposes, the roof rail must be used to-
gether with a roof crossbar kit and the appropriate carrying at-tachment. The roof rail must never be used alone to carry cargo.Otherwise, damage to the roof or paint or a dangerous road haz-ard due to loss of cargo could result. When using the roof crossbar kit, make sure that the total
weight of the crossbars, carrying attachment and cargo does not
exceed the maximum load limit. Overloading may cause damageto the vehicle and create a safety hazard.

6-24
HB8037BB
The roof rail is not designed to carry cargo by itself. Cargo can be car-
ried after securing the roof crossbar kit to the roof rail and installing the
appropriate carrying attachment. When installing the roof crossbar kit,
follow the manufacturer’s instructions.
When you carry cargo on the roof using the roof crossbar kit and a carry-
ing attachment, never exceed the maximum load limit explained below.
You should also be careful that your vehicle does not exceed the Gross
Vehicle Weight Rating (GVWR) and front and rear Gross Axle Weight Rat-
ing (GAWR). See the “Loading your vehicle ” section in Chapter 8 for in-
formation on loading cargo into or onto your vehicle. The maximum load
limit of the cargo, crossbars and carrying attachment must not exceed
100 lb. (45 kg). Place the heaviest load at the bottom, nearest the roof,
and evenly distribute the cargo. Always properly secure all cargo.
Installing carrying attachments on the crossbars
When installing any carrying attachment such as a bike carrier, ski
carrier, kayak carrier, cargo basket, etc. on the crossbars, follow the
manufacturer’ s instructions and make sure that the attachment is se-
curely fixed to the crossbars. Use only attachments designed specifi-
cally for the crossbars. A set of the crossbars is designed to carry
loads (cargo and attachment) of not more than 100 lb. (45 kg). Before
operating the vehicle, make sure that the cargo is properly securedon the attachment.

Interior and exterior equipments6-25
–
CONTINUED –
NOTE Remember that the vehicle ’s center of gravity is altered with the
weight of the load on the roof, thus affecting the driving charac- teristics.
Drive carefully. Avoid rapid starts, hard cornering and abruptstops. Crosswind effects will be increased. Removal and installation of the crossbars CAUTION
Do not carry cargo on the roof when the crossbars are removed. Luggage on the roof will be thrown forward or backward in sud-den stops or rapid accelerations, resulting in a dangerous roadhazard.
The crossbars can be removed when you do not use the roof to carrycargo. n To remove the crossbar
HB6047BAHB6048BA
1. Loosen and remove the T –30 torx head screw from the side of
each crossbar end support.
2. Move the end support and inner clamp to unhook each side of the
crossbar from the roof rail.
3. Carefully raise the crossbar from roof rails.

6-26
NOTE It may be necessary to move the Front crossbar rearward, near the center of the roof rail for easier removal. Use care not tocross-thread the screw in the insert if it has been removed. nTo install the crossbar
NOTE Both Crossbars have a label indicating the direction of mount. If they are not present, orient with the larger section of the Cross-
bar towards the front of vehicle (see below). The Front Crossbaralso has a MAXIMUM LORD Label affixed to it.
HB6046BB
Front crossbar:
Front crossbar has 100 LBS. Load Label on left-hand side.

Interior and exterior equipments6-27
–
CONTINUED –
HB6051BBHB6052BB
1. Before placing the crossbar on the roof rails, make sure that the
T-30 torx head screw is fully loosened from each end support.
2. Spread the inner clamp and the end support as far apart as pos-sible.
3. With the front direction arrow label on the top right side of the
crossbar pointing toward the front of the vehicle, carefully place the
crossbar across the top of the vehicle so that the crossbar end sup-
ports rest on the top of the roof rails 7 inches (180 mm) rearward in
the front radius of the roof rail.
4. Move the end support and inner clamp to hook under the end of
the roof rail on both sides and loosely assemble the T-30 torx head
screw with the tool provided into the threaded insert in the inner
clamp on each end of the crossbar. NOTE It may be necessary to start the inner clamp and end support at the center of the roof rail for easier installation, then move the
crossbar forward. Use care not to cross-thread the screw in theinsert if it has been removed.