Maintenance and service11-17
–
CONTINUED –
HG0115
Rubber gaskets
5. Put the radiator cap back on and tighten firmly. At this time, make
sure that the rubber gasket in the radiator cap is correctly in place.
6. Start and run the engine for more than five minutes at 2,000 to
3,000 rpm.
7. Stop the engine and wait until the coolant cools down (122 to140 °F [50 to 60 °C]). If there is any loss of coolant, add coolant to the
radiator’ s filler neck and to the reserve tank ’s “FULL” level.
8. Put the radiator cap and reservoir cap back on and tighten firmly.
Air cleaner element
WARNING
Do not operate the engine with the air cleaner element removed.The air cleaner element not only filters intake air but also stops
flames if the engine backfires. If the air cleaner element is not
installed when the engine backfires, you could be burned.
The air cleaner element functions as a filter screen. When the element is
perforated or removed, engine wear will be excessive and engine life
shortened.
The air cleaner element is a viscous type. It is unnecessary to clean or wash the element.
12-6
Fuse panel located in the engine compartment
HBC003BB
Fuse panelFuse ratingCircuit
120A Radiator cooling fan (Main)
220A Radiator cooling fan (Sub)
350A ABS motor
420A Rear window defogger
515A Hazard warning flasher
Horn
615A Meter
SRS airbag system warning light
710A Automatic transmission control unit
ABS UNIT
810A Alternator
915A Headlight (right side)
1015A Headlight (left side)
