2003 SAAB 9-5 garage door opener

126 Interior equipment and trunkRearview mirrorThe rearview mirror has day/night positions
that can be selected by means of a knob
beneath the mirror. Adjust the mirror in day
position.
Interior rearview mirror with garage
opener, autodimming and compass
(certain variants only)Retain your original garage door transmitter
for future programming procedures (i.e.,
new vehicle purchase). It is also suggested
that upon the sale of the vehicle, the pro-
grammed garage opener buttons be erased
for security purposes.
WARNING
Make sure that people and objects are out
of the way of a moving door or gate to pre-
vent potential harm or damage.
When programming the garage opener,
you may be operating a garage door or
gate operator.
Do not use the garage opener with any
garage door opener that lacks the safety
stop and reverse feature as required by
federal safety standards. (This includes
any garage door opener model manufac-
tured before April 1, 1982.). A garage
door opener which cannot detect an
object, signalling the door to stop and
reverse, does not meet current federal
safety standards. Using a garage door
opener without these features increases
risk of serious injury or death.
Rearview mirror 1 Day position
2 Night position
Buttons for garage opener and compass1-3 Garage opener
4 LED
5 Compass/auto dimming ON/OFF
6 Compass bearing
ProCarManuals.com

127 Interior equipment and trunk
Preparations for first-time programming
Before programming the garage opener for
the first time, you must delete any factory
codes.
Press and hold buttons 1 and 3 for about
20 seconds until the LED starts to flash.
This will delete the factory codes and initiate
the programming phase.
Programming the garage opener
The garage opener can record and store the
frequencies of three different remote con-
trols.
The battery in the remote control should be
fairly new for programming to work well.
1 Turn the ignition to ON.
2 Hold the garage door remote control
3–7 cm from the rearview mirror. Sit
where you can see the LED (4) during
programming.
3 Press the remote control button and the
desired button on the rear view mirror at
the same time.
4 The LED will now start to flash, slowly at
first and then rapidly. The rapidly flash-
ing LED indicates that programming is
complete and that you can release the
buttons.Reprogramming a button that has previ-
ously been programmed
1 Press and hold the desired button on the
rearview mirror for the entire program-
ming sequence.
2 The LED starts to flash slowly after
20 seconds.
3 Hold the garage door remote control
3 –7 cm from the rearview mirror and
press the button on the remote control.
4 Reprogramming is complete when the
LED starts to flash rapidly.
The previous frequency is now erased and
replaced by the new one. Reprogramming
one button does not affect the other buttons.
Complete erase
Completely erase the memory of the garage
opener by pressing and holding buttons 1
and 3 simultaneously for 20 seconds. Con-
firmation is provided by the LED flashing
rapidly for 10 seconds.
A complete erase deletes the frequencies
from all three buttons. It is not possible to
erase the memory of a single button.Opening a garage door
Press and hold the appropriate button until
the garage door starts to open.
You can of course still use the original
garage door remote control after you have
programmed the garage opener in the rear-
view mirror.
Garage doors with rolling security codes
Garage doors with rolling security codes
manufactured after 1996 can be identified
as follows:
 Read the garage door’s instruction man-
ual.
 Programming the garage opener in the
rearview mirror seems to be successful
but the garage door does not open.
 Press and hold the programmed button.
The garage door uses a rolling security
code if the LED flashes rapidly and after
2 seconds shines constantly.
ProCarManuals.com

128 Interior equipment and trunkIf the garage door remote control uses roll-
ing security codes, proceed as follows
having programmed the garage opener:
1 Localise the button labelled "learn" or
"smart" on the motor unit of the garage
door. The location and colour of this
button varies between makes.
2 Press and release the "learn" button on
the motor unit. Step 3 must be per-
formed within 30 seconds of Step 2.
3 Press the programmed button on the
rearview mirror twice (some garage
doors require the button to be pressed
three times; refer to the door’s instruc-
tion manual).Gate programming & Canada program-
ming
The remote control may stop transmitting
during programming. If so, continue to hold
the button on the rearview mirror and
release and press the button on the remote
control every other second, "cycling" until
programming is completed.
The LED will flash slowly at first and then
rapidly. The rapidly flashing LED indicates
that programming is complete and that you
can release the buttons.
NOTICESwitch off the power supply to the garage
door or gate (or park the car beyond the
range of the remote control) while pro-
gramming using the "cycling" method to
prevent damaging the electrical motor.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
must accept any interference received, including inter-
ference that may cause undesired operation.
Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate
the equipment.
Canada only:
This device complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this
device must accept any interference, including interfer-
ence that may cause undesired operation of this device.
ProCarManuals.com

129 Interior equipment and trunk
Rearview mirrors with auto dimming
function (accessory/option)The autodimming is activated and deacti-
vated with a short push on button 2.
If the mirror is equipped with Garage Door
Opener (option) the letter 1 is displayed on
compass bearing display briefly when auto
dimming is activated. When deactivating
the letter 0 is displayed.
The interior rearview mirror has two sen-
sors, one forward-facing and one rear-fac-
ing. They also activate and deactivate the
auto dimming feature on door mirrors.
The system is activated when the for-
ward-facing sensor detects that it is dark
outside and the rear-facing sensor detects.
For example, if the car following has not
dimmed its headlights. The rearview mirrors
are then darkened to prevent the strong light
source from dazzling the driver. This dark-
ening is stepless.
The mirrors return to their normal states
when the strong light source diminishes.
The auto dimming function can be turned
OFF with the switch on the lower edge of the
rear-view mirror.
NOTE
Towing a trailer can cause the system to
malfunction, as the rear-facing sensor may
sense light from the trailer.
1 Forward-facing sensor
2 ON/OFF switch, auto dimming function
3 Rear-facing sensor
ProCarManuals.com

274 IndexDoor handles
____________________ 42
Door mirrors ___________________ 125
Doors, locks & luggage compartment
_41
Drive belt
______________________ 263
Drive belt, alternator
_____________ 211
Drive belts, length
_______________ 263
Driver’s seat, programmable
________ 14
Driving at night
_________________ 186
Driving in hot weather
____________ 181
Driving with a load
_______________ 187
EESP
__________________________ 176
Electric heating seat
______________ 15
Electric heating, front seats
_________ 15
Electric windows
________________ 131
Electrical system, technical data
____ 263
Electrically heated rear seat
________ 15
Electronic Stability Program, ESP
___ 176
Electronic starting interlock
_________ 43
Emergency operation of sunroof
____ 133
Emission control systems
_________ 201
Engine bay, 3.0t V6
______________ 200
Engine bay, 4-cyl
_______________ 199
Engine bay, cleaning _____________ 245
Engine number
_________________ 269
Engine oil, grade ________________ 261
Engine, description _________ 202
, 203
Engine, technical data
____________ 260
Engine, temperature gauge
________ 63
Engine-oil level, checking
_________ 203
Expansion tank, coolant
__________ 206
FFault codes, Audio System
________109
Flat spot, tire
___________________241
Fluid level, automatic transmission
__205
Folding the rear seat, 9-5 Sedan
____139
Folding the rear seat, 9-5 Wagon ___142
Frequently asked questions on airbag
39
Front fog lights
__________________74
Frost warning
___________________66
Fuel
__________________________158
Fuel consumption
________________65
Fuel filler door
__________________150
Fuel gauge
_____________________63
Fuel grade _____________________260
Fuse box under hood
____________230
Fuse panel
____________________226
Fuses
________________________226
GGarage door opener
_____________126
Gearbox number
________________269
Gearbox oil, checking
____________205
Gearbox, technical data, __________264
Glove compartment
______________136
HHandbrake
_____________________195
Hazard warning lights
_____________74
Head restraint
___________________16
Headlight flasher _________________71Headlights
_____________________ 71
Holidaying abroad
______________ 248
Hood
________________________ 198
Horn _________________________ 124
IIgnition switch
_________________ 152
Immobilizer
____________________ 43
Indicator and warning lights
________ 56
Indicator lights
__________________ 56
Instrument illumination
___________ 73
Instruments and controls __________ 55
Integral child seat
_______________ 31
Interior equipment ______________ 123
Interior lighting
_________________ 134
Interior rearview mirror
__________ 125
JJack
_________________________ 239
KKey
__________________________ 42
Key to chassis number
__________ 270
Key, remove
__________________ 152
LLATCH (child safety)
_____________ 24
Labels
_________________________ 8
Leather upholstery, care of
_______ 243
Light horn
_____________________ 71
ProCarManuals.com