Page 164 of 210
AB1
5
4
3
2
Q X B I U D B * T [ G 3 D J H
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T5.WIN 30/10/2002 12:27-page10
5.10
HEADLIGHTS WITH HALOGEN BULBS: replacing bulbs
Headlight main beam
Remove the coverA.
Unclip bulb connector1.
Disengage the springs2and remove
the bulb.
Dipped beam headlights
Remove coverB.
Turn the connector a quarter of a
turn and remove bulb3.
Type of bulb:1
¶H1
3 ¶H7
anti-UV (see box).
Do not touch the Halogen bulb
glass. Hold it by its base.
Front side lights
Remove the bulb holder5to access
the bulb.
Bulb type: W5W.
Direction indicator lights
Turn the bulb holder4aquarterofa
turn and remove the bulb.
Bulb type: PY21W.
When the bulb has been changed,
please refit the cover.
Cleaning the headlights
As the headlights have plastic
lenses, use a soft cloth or cotton
wool.
If this is not sufficient, use a soft
cloth (or cotton wool) dampened
with soapy water then rinse using a
soft cloth or cotton wool.
Carefullydry off using a soft, dry
cloth.
Alcohol based cleaning products
must not be used under any
circumstances.
As the headlights are
fitted with plastic
“lenses”, it is essential to
use anti-UV bulbs.
(If other bulbs are used, this may
damage the headlight).
It is advisable to carry a set of
spare bulbs for emergencies.
Page 165 of 210
B
A
2
31
4
Q X B I U D B * T [ G 3 D J H
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T5.WIN 30/10/2002 12:27-page11
5.11
HEADLIGHTS WITH XENON BULBS: replacing bulbs
Dipped beam headlights with
xenon bulbs
They are marked on the label3
under the coverB.
This type of headlight bulb must be
changed by a RENAULT Dealer.
Bulb type: D2S.
A special mounting is
required to fit this type of
headlight.It is not
permitted to fit a headlight
fitted with xenon bulbs to a vehicle
which was not designed to accept
it.
Main beam headlights
Remove coverA.
Turn the connector1a quarter of a
turn and remove the bulb.
Type of bulb: anti U.V. (see box).
Do not touch the Halogen bulb
glass. Hold it by its base.
When the bulb has been changed,
refit coverAcorrectly.
As headlights are fitted
with plastic lenses, you
must use anti-UV 55 W
bulbs.(Using any other
type of H1 bulb may damage the
headlight).
It is advisable to carry a set of
spare bulbs for emergencies.
Page 166 of 210
2
4
Q X B I U D B * T [ G 3 D J H
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T5.WIN 30/10/2002 12:27-page12
5.12
HEADLIGHTS WITH XENON BULBS: replacing bulbs(continued)
Direction indicators
Turn the bulb holder2a quarter of a
turn and take out the bulb.
Bulb type: orange PY21 W bayonet
bulb.
Front side lights
Remove the coverA.
Remove the bulb holder4to access
the bulb.
Bulb type: W5W.
Cleaning headlights
As the headlights are made with
plastic lenses, use a soft cloth or
cotton wool to clean them.
If this does not clean them properly,
use a soft cloth or cotton wool
slightly moistened with soapy water
and then wipe clean with a soft
damp cloth.
Finally,carefullydryoffwithasoft
dry cloth.
Cleaning products containing
alcohol must not be used under any
circumstances.
Page 168 of 210
1
2
2
2
3
4
5
6
Q X B I U D B * T [ G 3 D J H
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T5.WIN 30/10/2002 12:27-page14
5.14
REAR LIGHTS: replacing the bulbs
Remove bolt1and release the rear
lights unit from outside.Unclip the bulb holder using tabs2.3Fog light (or nothing)
Bayonet type bulb with 2
filaments P 21 W.
4Indicator
Orange P 21 W bayonet bulb.
5Reversing light
Bayonet type bulb with 2
filaments P 21 W.
6Tail light and stop light
Bayonet type bulb with 2
filaments P 21/5 W.
Page 169 of 210
1
23
Q X B I U D B * T [ G 3 D J H
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T5.WIN 30/10/2002 12:27-page15
5.15
REAR LIGHTS: replacing the bulbs(continued)
Third centre stop light1
The third stop light is a special strip
light. Consult your Renault Dealer if
any work needs to be carried out on
this.
Number plate lights
Release bulb holder2(using a flat
blade screwdriver for example).Unclip lens3from the bulb holder
to reach the bulb.
Bulb type: double ended tubular
bulb 5 W.
Page 170 of 210
1
2
Q X B I U D B * T [ G 3 D J H
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T5.WIN 30/10/2002 12:27-page16
5.16
SIDE REPEATERS: replacing the bulbs
Unclip the repeater1(using a flat
blade screwdriver for example).Turn the bulb holder2a quarter turn
and remove the bulb.
Bulb type: W 5 W.
Page 171 of 210
14
2
3
Q X B I U D B * T [ G 3 D J H
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T5.WIN 30/10/2002 12:27-page17
5.17
INTERIOR LIGHTS: replacing the bulbs
Courtesy light
Unclip cover1(using a tool such as
a flat screwdriver).Turn bulb holder2or3aquarterofa
turn.
Bulb type: W 5 Wor:festoon type
bulb 7W for a single courtesy light.
Rear lights4
Unclip the light (using a tool such as
a flat-bladed screwdriver).
Remove the bulb by turning it a
quarter of a turn.
Type of bulb: Bayonet type 5 W.
Page 172 of 210
6
7
8
5
Q X B I U D B * T [ G 3 D J H
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T5.WIN 30/10/2002 12:27-page18
5.18
INTERIOR LIGHTS: replacing the bulbs(continued)
Door lights5
Unclip the light5(using a tool such
as a flat blade screwdriver).
Release the bulb.
Type of bulb: W 5 W.
Luggage compartment light6
Unclip light6by pressing on the
tabs on each side of the light (using
a tool such as a flat screwdriver).
Disconnect the light.Press tab7to release the lens and
reach the bulb8.
Type of bulb: double-ended tubular
bulb 7 W.
