2003 NISSAN XTERRA weight

[x] Cancel search: weight

Page 3 of 272

NISSAN XTERRA 2003 WD22 / 1.G Owners Manual Your new NISSAN is the result of our dedication to
produce the finest in safe, reliable and economical
transportation. Your vehicle is the product of a suc-
cessful worldwide company that manufactures

Page 78 of 272

NISSAN XTERRA 2003 WD22 / 1.G Owners Manual ROOF HEADLINER NET (if so
equipped)
The roof headliner net can be used to store paper
or small, lightweight objects that do not have
sharp edges.
WARNING
cThe cargo restrained by the roof head-
liner

Page 98 of 272

NISSAN XTERRA 2003 WD22 / 1.G Owners Manual 1. Adjustable cross-bar
2. Tubular roof rack
3. Removable gear basket
Always evenly distribute the cargo on the tubular
roof rack.The maximum total load is 125 lb
(57 kg) evenly distributed, including

Page 226 of 272

NISSAN XTERRA 2003 WD22 / 1.G Owners Manual If you have a flat tire, see the “In case of
emergency” section in this manual.
TIRE PRESSURE
Maximum inflation pressure
Do not exceed the maximum inflation pressures
shown on the sidewall of the

Page 231 of 272

NISSAN XTERRA 2003 WD22 / 1.G Owners Manual 9 Technical and consumer information
Capacities and recommended fuel/lubricants.........9-2
Fuel recommendation...........................9-3
Engine oil and oil filter recommendation...........9-5
Rec

Page 239 of 272

NISSAN XTERRA 2003 WD22 / 1.G Owners Manual DIMENSIONS AND WEIGHTS
Unit: in (mm)
XE XE XE SE SE
4x2 4x2 4x4 4x2 4x4
KA24DE VG33E/VG33ER VG33E/VG33ER VG33E/VG33ER VG33E/VG33ER
Overall length*1 178 (4,520) 178 (4,520) 178 (4,520) 178 (4,520) 178

Page 241 of 272

NISSAN XTERRA 2003 WD22 / 1.G Owners Manual ENGINE SERIAL NUMBER
The number is stamped on the engine as shown.
F.M.V.S.S. CERTIFICATION LABEL
The Federal Motor Vehicle Safety Standard (F.M-
.V.S.S.) certification label is affixed as shown.
This

Page 243 of 272

NISSAN XTERRA 2003 WD22 / 1.G Owners Manual Use the following steps to mount the front license
plate:
1. Remove the two screw gromments from the
glove box.2. Carefully drill a hole using a 0.39 inch (10
mm) drill bit at each location mark (smal
Page:   1-8 9-16 17-24 next >