2003 NISSAN SENTRA engine

[x] Cancel search: engine

Page 183 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual Removing the headlight bulb
1. Open the engine hood.
2. Disconnect the negative (-) battery cable.
3. Disconnect the electrical connector from the
rear end of the bulb.
4. Rotate the bulb retaining ri

Page 193 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual 9 Technical and consumer information
Capacities and recommended fuel/lubricants.........9-2
Fuel recommendation...........................9-3
Engine oil and oil filter recommendation...........9-5
Rec

Page 194 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure
described in the “Maintenance and do-it-yourself” section to

Page 195 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual FUEL RECOMMENDATION
For 1.8L/2.5L engines
Use unleaded regular gasoline with an octane
rating of at least 87 AKI (Anti-Knock Index) num-
ber (Research octane number 91) .
For SE-R SPEC V
Use unleaded

Page 196 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual Octane rating tips
In most parts of North America, you should use
unleaded gasoline with an octane rating of at
least 87 AKI (Anti-Knock Index) number. How-
ever, you may use unleaded gasoline with an

Page 197 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual ENGINE OIL AND OIL FILTER
RECOMMENDATION
Selecting the correct oil
It is essential to choose engine oil with the cor-
rect quality and viscosity to ensure satisfactory
engine life and performance. NIS

Page 198 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual Change intervals
The oil and oil filter change intervals for your
engine are based on the use of the specified
quality oils and filters. Using engine oil and filters
that are not of the specified qual

Page 199 of 224

NISSAN SENTRA 2003 B15 / 5.G Owners Manual ENGINE
ModelQG18DE QR25DE
TypeGasoline, 4-cycle, DOHC Gasoline, 4-cycle, DOHC
Cylinder arrangement4-cylinder in-line 4-cylinder in-line
Bore x Stroke in (mm) 3.150 x 3.465 (80. x 88.0) 3.504 x 3.937 (