2003 MITSUBISHI MONTERO battery

AC106603
Indicates power source.
Indicates that terminal is conne-
cted via a plate in the relay box.
Each circuit diagram consists of
block(s). The blocks are divided
by page number.
Indicates splice point numbers.
These numbers are identical to
those described in "Splice Loca-
tions."
Indicates the circuit name to be
connected. The arrow indicates
the current flow direction.
Indicates the power supply in
the control unit. If no voltage is
displayed, this indicates battery
positive voltage.
An "X" at the end of a connector
number indicates that the conn-
ector is connected to a central-
ized junction that is shown in the
section "Centralized Junction."
Indicates the connector symbol.
Connectors in the circuit diagram
are indicated in numerical order.
Indicates the operating conditions
of the engine coolant switch, etc.
Indicates connector number.
The same number as used in the
wiring harness diagram.
Connector and connector numbers
are shown at the lower part of the
page.
Connector numbers not enclosed
by frame indicate the device incor-
porated into wiring harness.
Indicates the circuit mame
to be connected. The arrow
indicatesthe current flow
direction.
Indicates that the diagram contin-
ues at which belongs to the
block in the same circuit.
AB
Indicates shield wire.Indicates that current
flows upwards.

AC203970
(RELAY BOX IN ENGINE COMPARTMENT)
1 2
34
29
5
30
FRONT OF
VEHICLE
AB
6
7
8
910
11
12
13 14
15 1622 21
17
18
19
2023 24
25 26
27 28
ACX01517
(CONNECTED DIRECTLY TO BATTERY POSITIVE TERMINAL)
31
32
33
AC

ACX00872
AB
BATTERY
FUSE
LOAD
SWITCH
LOADSHORT-
CIRCUIT
OCCURRENCE
SECTION
ACX00873
AB

DANGER
WARNING
WARNING
ACX00902AB
TA P E
BATTERY
BATTERY CABLE
ACX01318
FRONT IMPACT SENSORS
AB