2003 Mercury Mountaineer buttons

Ford Motor Company
Customer Relationship Center
16800 Executive Plaza Drive
P.O. Box 6248
Dearborn, MI 48121
1-800-392-3673 (FORD)
(TDD for the hearing impaired: 1-800-232-5952)
This Quick Reference Guide is not intended to replace your vehicle Owner’s Guide which contains more
detailed information concerning the features of your vehicle, as well as important safety warnings designed
to help reduce the risk of injury to you and your occupants. Please read your entire Owner’s Guide carefully
as you begin learning about your new vehicle and refer to the appropriate sections when questions arise.
All information contained on this Quick Reference Guide was accurate at the time of duplication. We reserve
the right to change features, operation and/or functionality of any vehicle specification at any time. Your Ford
dealer is the best source for the most current information.
For detailed operating and safety information, please consult your Owner’s Guide.
June 2002 | First Printing | Quick Reference Guide
Mercury Mountaineer | Litho in U.S.A.
2003 Mercury Mountaineer
QUICK REFERENCE GUIDE
2003 Mercury Mountaineer
QUICK REFERENCE GUIDE
Audio Features
Specifications
To use the automatic one-touch express opening feature, press and briefly
hold the rear portion of the control; press again to stop. To close, press and
hold the front portion of the control until the glass panel stops moving.
Once fully closed, the rear of the panel will appear higher than the front
edge. The glass panel can be moved back to open or tilted up for
ventilation. With the panel closed, press and hold the front portion of the
control to tilt the roof to vent position; to close from vent position, press
and hold the rear portion of the control until the glass panel stops moving.Mountaineer is so accommodating that it’s available heated seats allow
both driver and front passenger to add warmth to their travels.
To operate the heated seats:
Activate by pushing the control (located on the side of the seat, on
the outboard portion of the plastic side shield ).
To deactivate, push the control again. The heated seat icon in the
dual electronic automatic temperature control (DEATC) will illuminate
when activated.
HEATED SEATS (IF EQUIPPED)
The remote entry system allows you
to lock or unlock all vehicle doors
and liftgate and open the liftgate
window without a key.
UNLOCKING THE
DOORS/LIFTGATE
Press this control to unlock
the driver’s door. The
interior lamps will illuminate
with the ignition off. Press the
control a second time within
three seconds to unlock all
doors and liftgate. Your system
will automatically relock if a
door or the trunk hasn’t been
opened within 45 seconds.
LOCKING THE DOORS/LIFTGATEPress this control to lock all doors
and liftgate. The doors and liftgate
will lock and the lamps will flash once as
long as all doors, liftgate, and the liftgate
glass are closed. (Also includes hood on
vehicles equipped with perimeter anti-theft).
If any of these are ajar, the lamps will
not flash.
To confirm all doors are closed and locked,
press the control a second time within
three seconds.The doors will lock again and the horn
will chirp.
If any of the doors or liftgate are ajar, the
horn will make two quick chirps, reminding
you to properly close all doors.
OPENING THE LIFTGATE WINDOWPress the control to open the
liftgate window.
SOUNDING A PANIC ALARM
The Panic feature operates with
the key in the OFF position. Press
this control to activate the alarm. The
personal panic alarm will cycle the horn and
turn signals on/off, plus illuminate the
interior lights. To deactivate the alarm, press
the control again or turn the ignition to ACC
or ON.
MEMORY SEAT FEATURE
(IF EQUIPPED)
The remote entry system can also control the
memory seat feature. Press the control once
to unlock the driver’s door and move the
memory seat feature to the corresponding
memory position, (just as if you had pressed
the memory control in the vehicle).
REMOTE ENTRY SYSTEM
1. ON/OFF AND VOLUME CONTROL
Press for on or off, turn to adjust volume.
2.AM/FM SELECTION
Radio mode: use this control to switch
between AM, FM1 or FM2 memory preset
stations. Tape mode: press to stop tape play
and begin radio play. CD mode: press to
stop CD and begin playing the radio.
3.SEEK CONTROLSRadio mode: press the left arrow of the
SEEK function to find the next listenable
station down the frequency band, the right
arrow to find the next listenable station up
the band. Tape/CD mode: press the left
arrow for the previous selection, the right
arrow for the next selection.
4.TUNE CONTROLRadio mode: press the left arrow to move to
the next frequency, hold to move quickly
through all frequencies, or press the right
arrow to move to the next frequency.
CD mode: press the left arrow to select the
previous disc, hold to continue reversing
through discs; press the right arrow to
select the next disc, hold it to fast-forward
through remaining discs.
5.SCAN CONTROLPress to hear a brief sampling of all
listenable radio stations, tape or CD
selections; press again to end scan.
6.BASS + TREBLE CONTROLPress BASS or TREB, then press the left
arrow of SEL to decrease the quality or the
right arrow to increase the quality.
7.BALANCE + FADEPress BAL and use the left arrow of SEL to
shift sound to the left speakers, the right
arrow to shift to the right speakers. Press
FADE and the right arrow of SEL to shift soundto front speakers, left arrow to shift to the rear.
8.TAPE/CD SELECTIONIf a tape is already in, press TAPE to play. If
a CD is already in, press CD to begin play.
9.RADIO PRESETSChoose AM or FM, find the station you
seek, then press and hold one of the preset
buttons. When the sound returns, it means
your station has been stored.
10.FAST FORWARD + REWIND
To fast-forward, press FF; to rewind,
press REW.
11.EJECTING THE TAPE OR CD
Press EJ to stop and eject a tape or CD.
LOCATION OF THE SPARE TIRE AND TOOL
The spare tire is located under the vehicle,
just forward of the rear bumper. The spare
tire winch drive nut is located at the rear
center of the cargo area under a lid. The
jack, lug nut wrench and jack handle are
located behind the rear seat under the
carpeted floor lid in the cargo floor.
FUSES
If electrical components in your vehicle are
not working, a fuse may have blown. The
fuse panel is located below the instrument
panel on the driver’s side; remove the cover
to view the fuses. To learn about changing
fuses, please consult your Owner’s Guide.
UNLEADED FUEL RECOMMENDATIONS
Use “Regular” unleaded gasoline with an
(R+M)/2 octane rating of 87. Mercury does
not recommend using “Regular” gasoline
with an octane rating of 86 or lower in high
altitude areas.
TIRE PRESSURE
Adjust the tire pressure to the specifications
on your Certification Label, located near
the driver’s side front door latch. When
checking pressure, use an accurate tire
pressure gauge. Check tire pressure when
the tires are cold, after the vehicle has been
parked for at least one hour or has been
driven less than 3 miles.
Warning: Improperly inflated tires can affect
vehicle handling and can fail suddenly,
possibly resulting in loss of vehicle control.
CHANGING THE TIRES
Your vehicle is equipped with a spare tire
that can be used as a spare or a regular tire.
(It’s identical to the other tires on your
vehicle, although the wheel won’t match.)
ROADSIDE ASSISTANCE
During your vehicle’s 3-year/36,000-mile
limited warranty period, every new Mercury
vehicle includes the assurance and support
of a 24-hour emergency Roadside
Assistance program. Roadside Assistance
includes such services as fuel delivery, tire
changes, jump starts, and help when you
are locked out of your vehicle.
Please complete your Roadside Assistance
identification card and keep it in your wallet
for quick reference. This card can be found
in your glove compartment, in your Mercury
Owner’s Guide portfolio.
To receive roadside assistance in the
United States for Ford or Mercury vehicles,
call 1-800-241-3673.
All information contained in this Mercury
Quick Reference Guide was accurate at the
time of duplication. We reserve the right to
change features, operation and/or
functionality of any vehicle specification at
any time. Your Mercury dealer is the best
source for the most current information.
For detailed operating and safety information,
please consult your Owner’s Guide.
MOON ROOF (IF EQUIPPED)
Additional Features
1
2
3
45
6
78
1011
9PREMIUM AUDIO SYSTEM(IF EQUIPPED)
If your Mountaineer came
equipped with another audio
system, please see your
Owner’s Guide.
AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED)
1.ON/ OFF— With the ignition in the ON position, press AUTO, any of the override controls,
the fan speed control, or either of the temperature selection controls to turn the system on.
Press OFF, to turn the system off. If the outside temperature function has been selected, it
will continue to operate until the ignition is turned off.
2.AUTO— To initiate automatic operation, press AUTO and select the desired temperature.
When AUTO is selected, the air conditioning system automatically makes climate control
adjustments based on existing conditions.
3.DUAL— As driver, you can press DUAL to enable or disable the dual zone temperature
feature. Your passenger may also initiate the dual temperature zone feature by pressing the
passenger side temperature control. When DUAL is selected, the indicator will illuminate.
The display window will indicate the current driver-selected temperature setting and the last
passenger-selected temperature setting.
4.TEMPERATURE CONTROL— To control the temperature on the driver’s side, select any
temperature between 60°F and 90°F by pressing the temperature control. The display
window indicates the selected temperature and allows for manual control of fan speed if
automatic fan speed is not desired. Have your passenger press the passenger-side
temperature control to select any temperature between 60°F and 90°F.
12
3
44
If your Mountaineer came
equipped with another climate
control system, please see your
Owner’s Guide.
*F3L9J19G217AA*
3L9J-19G217-AA
2-Mountaineer QRG.QXD 10/27/03 11:20 AM Page 1