2003 MERCEDES-BENZ ML350 Oil requirements

ContentsPractical hints.................................. 223
What to do if … .................................. 224
Lamps in instrument cluster ......... 224
Additional indicators in the
speedometer display .................... 235
Where will I find ...?............................ 236
First aid kit ................................... 236
Vehicle tool kit ............................. 237
Electric air pump (ML 55 AMG) .... 238
Spare wheel (space-saver tire) ..... 239
Unlocking/locking in an emergency .. 242
Unlocking the vehicle ................... 242
Locking the vehicle ...................... 243
Changing batteries ....................... 243
Fuel filler flap ............................... 244
Manually unlocking the
transmission selector lever .......... 245
Opening/closing in an emergency ..... 246
Sliding/pop-up roof* .................... 246
Replacing bulbs ................................. 247
Bulbs ............................................ 247
Replacing bulbs for front lamps.... 249
Replacing bulbs for rear lamps ..... 251
Adjusting headlamp aim ............... 253Replacing wiper blades ...................... 254
Removal ....................................... 254
Installation ................................... 254
Flat tire .............................................. 255
Mounting the spare wheel ............ 255
Battery ............................................... 261
Disconnecting the battery ............ 261
Removing the batteries ................ 262
Charging and reinstalling
batteries....................................... 262
Reconnecting the batteries .......... 262
Jump starting ..................................... 264
Towing the vehicle ............................. 267
Front towing eye .......................... 269
Rear towing eye ........................... 269
Stranded vehicle .......................... 270
Fuses ................................................. 271
Fuse box in engine
compartment ............................... 271
Auxiliary fuse box in front
passenger footwell ....................... 272
Technical data................................. 273
Spare parts service............................ 274
Warranty coverage ............................ 275
Loss of Service and Warranty
Information Booklet ..................... 275
Identification labels ........................... 276
Layout of poly-V-belt drive ................. 277
Engine ............................................... 278
Rims and tires ................................... 279
Rims and tires .............................. 279
Rims and winter tires* ................. 280
Spare wheel ................................. 280
Electrical system ............................... 281
Main Dimensions ............................... 282
Weights ............................................. 283
Fuels, coolants, lubricants etc. .......... 284
Capacities .................................... 284
Engine oils ................................... 286
Engine oil additives ...................... 286
Air conditioning refrigerant .......... 286
Brake fluid.................................... 286
Premium unleaded gasoline ......... 286
Fuel requirements ........................ 287
Gasoline additives ........................ 287
Coolants ...................................... 287

287 Technical data
Fuels, coolants, lubricants etc.
Fuel requirements
Use only premium unleaded meeting
ASTM standard D 439:

The octane number (posted at the
pump) must be 91 min. It is an average
of both the Research (R) octane num-
ber and the Motor (M) octane number:
(R+M) / 2). This is also known as the
ANTI-KNOCK INDEX.
Unleaded gasoline containing oxygenates
such as ethanol, IPA, IBA and TBA can be
used provided the ratio of any one of these
oxygenates to gasoline does not exceed
10%; MTBE not to exceed 15%.
The ratio of methanol to gasoline must not
exceed 3% plus additional cosolvents.
Using mixtures of ethanol and methanol is
not allowed. Gasohol, which contains 10%
ethanol and 90% unleaded gasoline, can be
used.
These blends must also meet all other fuel
requirements, such as resistance to spark
knock, boiling range, vapor pressure etc.
Gasoline additives
A major concern among engine manufac-
turers is carbon build-up caused by gaso-
line. Mercedes-Benz recommends only the
use of quality gasoline containing additives
that prevent the build up of carbon depos-
its.
After an extended period of using fuels
without such additives, carbon deposits
can build up especially on the intake valves
and in the combustion area, leading to en-
gine performance problems such as:

Warm-up hesitation


Unstable idle


Knocking/pinging


Misfire


Power loss
Do not blend other specific fuel additives
with fuel. This only results in unnecessary
costs and may be harmful to the engine op-
eration.Damage or malfunctions resulting from
poor fuel quality or from blending specific
fuel additives are not covered by the
Mercedes-Benz Limited Warranty.
Coolants
The engine coolant is a mixture of water
and anticorrosion / antifreeze, which pro-
vides:

Corrosion protection


Freeze protection


Boiling protection (by increasing the
boiling point)
The cooling system was filled at the factory
with a coolant providing freeze protection
to approximately -35°F (-37°C) and corro-
sion protection.
If the antifreeze mixture is effective to
-22°F (-30°C), the boiling point of the cool-
ant in the pressurized cooling system is
reached at approximately 266°F (130°C).

288 Technical dataFuels, coolants, lubricants etc.The coolant solution must be used year
round to provide the necessary corrosion
protection and increase in boil-over pro-
tection. You should have it replaced every
3years.
To provide important corrosion protection,
the solution must be at least 45% anticor-
rosion/antifreeze (equivalent to freeze
protection to approx. - 22°F [-30°C]). If
you use a solution that is more than 55%
anticorrosion/antifreeze (freeze protec-
tion to approx. - 49°F [-45°C]), the engine
temperature will increase due to the lower
heat transfer capability of the solution.
Therefore, do not use more than this
amount of anticorrosion/antifreeze.If the coolant level is low, water and MB
anticorrosion /antifreeze should be used
to bring it up to the proper level (have cool-
ing system checked for signs of leakage).
Please make sure that the mixture is in ac-
cordance with label instructions.
The water in the cooling system must meet
minimum requirements, which are usually
satisfied by normal drinking water. If you
are not sure about the water quality, con-
sult your authorized Mercedes-Benz Light
Truck Center.
Anticorrosion/antifreeze
Your vehicle contains a number of alumi-
num parts. The use of aluminum compo-
nents in motor vehicle engines
necessitates that anticorrosion/antifreeze
coolant used in such engines be specifical-
ly formulated to protect the aluminum
parts. (Failure to use such anticorro-
sion/antifreeze coolant will result in a sig-
nificantly shortened service life.)
Therefore, the following product is strongly
recommended for use in your vehicle:
Mercedes-Benz Anticorrosion/Antifreeze
agent.
Before the start of the winter season (or
once a year in hot southern regions), you
should have the anticorrosion/antifreeze
concentration checked. The coolant is also
regularly checked each time you bring your
vehicle to your authorized Mercedes-Benz
Light Truck Center for service.

316 IndexSwitching off
Automatic climate control 127
ESP 76
Front fog lamps 106
Hazard warning flasher 106
Headlamps 51
Rapid seat heating 91
Rear fog lamp 106
Transmission control – LOW RANGE
mode 118
Switching on
Automatic climate control 126
ESP 77
Front fog lamps 105
Front fog lamps, rear fog lamp 105
Hazard warning flasher 106
Headlamps 46
High beams 102
Rapid seat heating 91
Seat heating 91
Transmission control – LOW RANGE
mode 118
Trip computer 172
Windshield wipers 47Synchronizing
Power windows 136
Remote control 244
Sliding/pop-up roof 138
T
Tachometer 26, 112
Displaying gear range 114
Tail lamps 251
Cleaning 220
Replacing bulbs 248
Tar stains 218
Technical data 286
Brake fluid 286
Coolants 287
Electrical system 281
Engine 278
Engine oil 286
Engine oil additives 286
Fuel requirements 287
Gasoline additives 287
Main dimensions 282
Premium unleaded gasoline 286
Rims and tires 279
Weights 283
Windshield and headlamp washer sys-
tem 290Tele Aid
Information 165
Initiating an emergency call manually
163
Roadside assistance 163
Tele Aid System 160
Tele Aid System* 296
Tele Aid* 159
Emergency calls 161
Remote door unlock 167
Stolen vehicle tracking services 168
System self-check 160
Upgrade signals 166
Telematics* 296
Telephone* 158
Temperature
Grades of tires 292
Tires 211
Third row seats* 96
Folding down single seat 96
Installing single seat 98
Removing single seat 98
Storing single seat 97
Tie-down rings (Cargo compartment) 140
Tightening torque 296
Tightening torque (Wheel bolts) 258