2003 MERCEDES-BENZ M-Class lock

71 Telephone
Telephone operation
FunctionPage
1Unlock code menu72
2Main telephone menu
3Telephone roaming indicator
S: Signal
R: Roaming
R (highlighted): Roaming on
non-home type system
4Signal strength meter
5Incoming call73
6Alphabetic phone book76
7Numeric phone book77

72 Telephone
Telephone operation
Press .
The menu to enter the unlock code ap-
pears.
Entering the unlock code
Use the number keys through
to enter the unlock code.
Asterisks instead of digits will appear in
the input line.If the code entered is correct and the
phone is registered in a network, the
phone is ready for use.If the telephone is ready for operation,
“READY” appears. The graphic (left) de-
picts strong signal reception. If you are not
in a home network, the roaming indicator
“R” is shown.
Switch to an audio mode, navigation
mode*.
Allow the telephone to switch to sleep
mode.
or
Switch off the MCS system.
Switching telephone operation on
i
Timeport phones use a three-digit code.
V60 phones use a four-digit code. The
head unit unlocks the phone using the
first three digits of the four-digit V60
unlock code.
Your unlock code prevents unautho-
rized persons from using your tele-
phone. Be sure to memorize this code
carefully.
If you enter an incorrect code, the sys-
tem returns to the menu for entering
the unlock code.
You must always enter the unlock code
when you switch on the telephone in
locked mode.
Switching telephone operation off

80 Telephone
Emergency call
Emergency call
You can use a mobile communications net-
work to make an emergency call to an
emergency rescue station.
The emergency call is placed as long as the
corresponding mobile communication net-
work is available. To place an emergency
call, switch the telephone on.
Emergency calls may not be possible with
all mobile phone networks, or if certain
network services and/or telephone func-
tions are active. Check with your local net-
work operating company.Initiating an emergency call
Make sure that the main telephone
menu is displayed.
Press the number key longer
than 2 seconds (quick-dialing).
The telephone begins dialing.
The call time appears when the call is
initiated.
Ending or stopping an emergency call
Press .
i
The emergency call is also placed if the
phone is locked.
i
This function places a call to a local 9-1-
1 provider. This function does not ini-
tiate a Tele Aid call.
WarningG
The 9-1-1 emergency call system is a public
service. Using it without due cause is a crim-
inal offense.
!
If you press the number key
longer than 2 seconds, the number
stored in memory location “1” (default
is 9-1-1) is dialed.
!
It is not possible to complete the emer-
gency call if the cellular system is busy.
The message “SYSTEM BUSY” ap-
pears.
Take appropriate measures to alert an
emergency service as soon as possi-
ble.

89 Navigation
Destination input
FunctionPage
1Main navigation menu
2Setup Select menu
3Display Setup menu
4Guidance Setup menu
5Clock Adjustment menu143
6Language/Unit menu142
7System Information
menu140
8Route Select menu
9Avoid Road menu117
FunctionPage
10Change Current Method
menu115
11Delete Stopover menu
12Map screen
13Edit Select menu
14Edit Today’s Plan menu127
15Edit Address Book menu124
16Edit Previous Destina-
tions menu129
17Save Current Position in
Previous Destinations
menu128
FunctionPage
18Find Destination by
menu
19Today’s Plan menu125
20Address Book menu106
21Previous Destination
menu107
22Phone Number menu104
23Point of Interest menu100
24Intersection menu96
25Address menu92

143
Info Services/System settings
System settings
The MCS is equipped with an integrated
clock that can be displayed in the naviga-
tion menu.
Press .
Use the joystick to select the menu
“SYSTEM SETUP” and press .
Use the joystick to select the “Clock
Adjustment” menu by and press .
The Clock Adjustment menu appears
and the current settings are displayed.Enter time zone
Use the joystick to select the “Time
Zone” menu and press .
You can select:

The time zone.

Auto adjust.
The MCS automatically changes the
clock depending on the time zone
you are in.
Use the joystick to select the desired
mode by and press .
Integrated clock adjustment
i
The clock can display either the esti-
mated time of arrival or time remaining
to your destination. See (
page 133).
P82.85-9566-31
P82.85-9576-31
P82.85-9578-31

144
Info Services/System settings
System settings
Enter time
Use the joystick to select the “Time”
menu and press .
You can select:

“Standard” time

“Daylight” saving
The MCS automatically changes the
time one hour forward.
Use the joystick to select the desired
mode and press .Show or hide time
Use the joystick to select the “Clock”
menu and press .
You can select:

“Show”
The time is displayed in the naviga-
tion mode.

“Hide”
The time is not displayed in the nav-
igation mode.
Use the joystick to select the desired
setting and press .
After you select the desired mode, use
the joystick to select “Return” and
press .
The setup menu appears.