2003 MERCEDES-BENZ M-Class change time

83 Navigation
Important notes
Travelling abroad
If you intend to travel through different re-
gions or abroad, you will need the respec-
tive navigation DVD.
Contact your Mercedes-Benz Center or
the Client Assistance Center at
1-800-FOR-MERCedes (1-800-367-6372)
for available DVDs.
Change the navigation DVD
(
page 86).
i
The CD/DVD drive can read navigation
DVDs and playback audio CDs.
If an audio CD is inserted in the CD/
DVD drive and is pressed, the
message “MUSIC CD INSERTED
PLEASE REPLACE WITH A NAV-
IGATION DISC” is displayed.

Remove the audio CD and insert a
navigation DVD (
page 86).
!
GPS (Global Positioning System) sig-
nals received make it possible to de-
termine the current vehicle position.
Deviations from the actual position
may occur

If the reception of GPS signals is
disturbed, e.g. in parking garages
and tunnels

If road conditions are poor

If your vehicle has been damaged
The MCS may require some time to
find its exact position after your vehi-
cle has been transported by car, train,
or ferry. Moving the vehicle a few yards
is typically enough to remedy this situ-
ation.

92 Navigation
Destination input
Searching for a destination by address

Press .

Use the joystick to select “INPUT
DESTINATION” and press .The Find Destination by menu appears.
Use the joystick to select “Address”
and press .You can find the address by:

Selecting“Street Name”, if you
want to search for the address by
street name and number.

Selecting“City Name”, if you want
to search for the city name first.

Selecting“Change State”, if you
want to search for the address in a dif-
ferent state.

Selecting“Change Province”, if
you want to search for the address in a
different province.
Use the joystick to select the desired
method and press .
P82.85-9566-31
P82.85-9562-31
P82.85-9561-31i
If you have entered the state or the
province and you know the city name,
use the city name to start your search.
This will save time versus starting a
search using the street name.

113 Navigation
Route guidance
The Detailed Map display shows a moving
map with the recommended route high-
lighted in blue.
Press the softkey “MAP” to change
the display. To activate the softkeys, press
any softkey. Voice instructions announce all maneu-
vers. The instructions are announced be-
fore a maneuver is required. For example,
you may hear an announcement, “In one
half mile, make a right turn”.
When it is time to perform the maneuver,
you will hear an announcement, “Right turn
ahead.”
To repeat the verbal announcement, press
the key.
To set the volume (
page 16).
To mute the voice instructions
(
page 114).Press the softkey “LIST” to display
the maneuver list. To activate the softkeys,
press any softkey.
To preview the arrow guidance screen for a
particular maneuver, use the joystick to
scroll down the list and select a maneuver
and press .
Press softkey “MAP” to return to the
original guidance screen or wait 10 sec-
onds and the display automatically returns
to the original guidance screen.

143
Info Services/System settings
System settings
The MCS is equipped with an integrated
clock that can be displayed in the naviga-
tion menu.
Press .
Use the joystick to select the menu
“SYSTEM SETUP” and press .
Use the joystick to select the “Clock
Adjustment” menu by and press .
The Clock Adjustment menu appears
and the current settings are displayed.Enter time zone
Use the joystick to select the “Time
Zone” menu and press .
You can select:

The time zone.

Auto adjust.
The MCS automatically changes the
clock depending on the time zone
you are in.
Use the joystick to select the desired
mode by and press .
Integrated clock adjustment
i
The clock can display either the esti-
mated time of arrival or time remaining
to your destination. See (
page 133).
P82.85-9566-31
P82.85-9576-31
P82.85-9578-31

144
Info Services/System settings
System settings
Enter time
Use the joystick to select the “Time”
menu and press .
You can select:

“Standard” time

“Daylight” saving
The MCS automatically changes the
time one hour forward.
Use the joystick to select the desired
mode and press .Show or hide time
Use the joystick to select the “Clock”
menu and press .
You can select:

“Show”
The time is displayed in the naviga-
tion mode.

“Hide”
The time is not displayed in the nav-
igation mode.
Use the joystick to select the desired
setting and press .
After you select the desired mode, use
the joystick to select “Return” and
press .
The setup menu appears.