Page 89 of 150
86 Navigation
Quick reference
Inserting
Press to lower the front of the
control panel.
Insert the navigation DVD into the CD/
DVD slot with the label side up. The
DVD is automatically fed into the CD/
DVD player.
The control panel closes automatically
after a few seconds.Ejecting
Press to lower the front of the
control panel.
Press to eject the inserted DVD.
Press to raise the front of the
control panel.
Inserting or ejecting the navigation DVDi
If a navigation DVD is inserted, the nav-
igation DVD symbol is displayed
when in the radio, tape, or CD mode.
Page 118 of 150
115 Navigation
Route guidance
Adding a stopover to the route
Whenever a destination is set and calculat-
ed, the system allows you to create a stop-
over along the way.
Start route guidance.
Enter a desired stopover destination.
In the Confirm Destination menu, se-
lect “Add as Stopover to
Route” and press .
The desired destination is added to the
route.Cancelling the current destination
To activate the softkeys, press any
softkey.
Press the softkey “STOP”.
A window appears confirming the stop
request.
If you wish to delete the current desti-
nation, use the joystick to select “YES”
and press .
The current destination is cancelled.
or
If you don’t wish to continue:
Use the joystick to select “NO”
and press
Press .
Wait 10 seconds
The stop request is cancelled.Changing the route calculation mode dur-
ing guidance
Press .
Use the joystick to select “ROUTE
FUNCTIONS” and press .
The Route Select menu appears.
P82.85-9670-31
P82.85-9566-31
Page 120 of 150
117 Navigation
Route guidance
Viewing the maneuver list during guidance
You can display the Maneuver List during
route guidance to preview upcoming turns
and street names.
Use the joystick to select “ROUTE
FUNCTIONS” and press .
To activate the softkeys, press any
softkey.
Press the softkey “LIST”.
The Maneuver List menu appears.
To preview a specific maneuver, use
the joystick to select a street name/
maneuver and press .
The maneuver screen for the selected
maneuver appears on the display.
To return to the Guidance mode, press
the softkey “MAP”.
or
Wait 10 seconds and the system will
automatically return to the Guidance
mode.Avoiding a road
Press .
Use the joystick to select “ROUTE
FUNCTIONS” and press .
The Route Select menu appears.
P82.85-9633-31
P82.85-9566-31
Page 142 of 150
139
Info Services/System settings
Info Services
After new information has been download-
ed, the message “NEW INFO RECEIVED
READ LATER WHEN STOPPED” ap-
pears.
By pressing the softkey “YES”,
you switch back to the current back-
ground audio mode (e. g. radio mode).
By pressing the softkey “NO”, the
new information is displayed immedi-
ately.
With the softkeys and
or with the joystick you can flip
to the next or previous page.
To exit the info service mode, switch to
the radio, tape or CD mode, or switch
off the MCS.
i
If Info Services can not be retrieved,
one of the following error messages is
displayed:
“DATA CONNECTION CANNOT
BE ESTABLISHED” - request has
failed because the Response Center
can not be accessed.
“TELE AID PLEASE VISIT
WORKSHOP” - a hardware error has
been detected. Contact your autho-
rized Mercedes-Benz Center.
“INFO SERVICE NOT ACTI-
VATED” - Info Services is not acti-
vated. You must activate Tele Aid at
the Response Center and select the
optional Info Services.
If one of the above error messages is
displayed, press the softkey
“RTN” to return to Info Services display.
WarningG
A driver's attention to the road must always
be his/her primary focus when driving.
For your safety and the safety of others, we
recommend that you pull over to a safe loca-
tion and stop the vehicle before requesting
or receiving any info services.
