2003 MERCEDES-BENZ CLK55AMG COUPE mirror controls

149 Controls in detail
Good visibility
Good visibility
Information on the windshield wipers
(page 47) and for setting the rear view
mirrors (
page 38) is found in the “Get-
ting started” section.
Rear view mirror
Automatic antiglare rear view mirror
The reflection brightness of the exterior
rear view mirror on the driver’s side and
the inside rear view mirror will respond au-
tomatically to glare when

the ignition is switched on, and


incoming light from headlamps falls on
the sensor in the inside rear view mir-
ror.
The rear view mirror will not react if


reverse gear is engaged


the interior lighting is turned on
Warning!
G
The automatic antiglare function does not
react if incoming light is not aimed directly
at sensors in the inside rear view mirror.
The inside rear view mirror and the exterior
rear view mirror on the driver’s side do not
react, for example, if the rear window sun
shade* is in raised position.
Glare can endanger you and others.Warning!
G
In the case of an accident liquid electrolyte
may escape from the mirror housing if the
mirror glass breaks.
Electrolyte has an irritating effect. Do not al-
low the liquid to come into contact with
eyes, skin, clothing, or respiratory system.
In case it does, immediately flush affected
area with water, and seek medical help if
necessary.
Warning!
G
Exercise care when using the passenger
side exterior rear view mirror. The mirror
surface is convex (outwardly curved surface
for a wider field of view). Objects in mirror
are closer than they appear. Check your in-
side rear view mirror or glance over your
shoulder before changing lanes.!Electrolyte drops coming into contact
with the vehicle paint finish can be
completely removed only while in the
liquid state by applying plenty of water.

150 Controls in detailGood visibilityParking position
The button is located on the left side of the
dashboard.
1Passenger-side exterior mirror
2Driver’s side exterior mirror
You can store a parking position for an ex-
terior rear view mirror in the memory
(page 103).

Make sure that the
Mirror adjustment
parking aid function
, found under
the
Convenience
submenu in the con-
troll system, is switched on
(
page 135).

Switch on ignition.

Press button1 for the passenger-side
exterior rear view mirror.

Place the gear selector lever in R Re-
verse.
The passenger-side mirror will be
turned downward in the stored posi-
tion.The exterior rear view mirror returns to its
previously stored driving position:


10 seconds after you put the gear se-
lector lever out of positionR


immediately once you exceed a speed
of approx. 6 mph (10 km/h)


immediately when you press the button
for driver’s side mirror

152 Controls in detailGood visibilitySun visors
The sun visors protect you from sun glare
while driving.
Swing sun visors down when you expe-
rience glare.1Mounting
2Sun visor
3Mirror cover
4Mirror lamp

To use mirror, lift up cover3.If sunlight enters through a side window:

disengage sun visor from mounting1.

pivot sun visor to the side.
The sun visors are extendable.

Adjust the sun visors by pushing or
pulling in the direction of the arrows.
Warning!
G
Do not use the vanity mirror while driving.
Keep the mirrors in the sun visors closed
while vehicle is in motion. Reflected glare
can endanger you and others.
iIf you disengage the sun visor from
mounting1, mirror lamp4 will switch
off.

227 Controls in detail
Useful features
Tele Aid The Tele Aid system
(Telematic Alarm Identification on De-
mand)
The Tele Aid system consists of three
types of response:


automatic and manual emergency


roadside assistance and


information
The Tele Aid system is operational provid-
ing that the vehicle’s battery is charged,
properly connected, not damaged and cel-
lular and GPS coverage is available.
The speaker volume of a Tele Aid call can
be adjusted when using the volume control
on the multifunction steering wheel. To
raise, press button
æ
and to lower,
press button
ç
.

To activate, press the SOS button, the
Roadside Assistance button
•
or
the Information button
¡
, depend-
ing on the type of response required.Shortly after the completion of your Ac-
quaintance Call, you will receive a user ID
and password via first call mail. By visiting
www.mbusa.com and selecting “Tele Aid”
(USA only), you will have access to account
information, remote door unlock and
more.
!The initial activation of the Tele Aid sys-
tem may only be performed by com-
pleting the subscriber agreement and
placing an acquaintance call using the
SOS button. Failure to complete either
of these steps will result in a system
that is not activated. If the system is
not activated, the indicator lamp in the
SOS button stays on after turning key
in starter switch to position2 or press-
ing KEYLESS-GO* start/stop button (if
so equipped) twice to position2
(page 33). The message
Tele Aid
not activated
will be shown in the
multifunction display for approx.
10 seconds.
If you have any questions regarding ac-
tivation, please call the Response Cen-
ter at 1-800-756-9018 (in the USA) or
1-888-923-8367 (in Canada).
iThe SOS button is located above the in-
side rear view mirror.
The Roadside Assistance button
•

and the Information button
¡
are
located below the center armrest cov-
er.
!The Tele Aid system utilizes the cellular
network for communication and the
GPS (Global Positioning System) satel-
lites for vehicle location. If either of
these signals is unavailable, the
Tele Aid system may not function and if
this occurs, assistance must be sum-
moned by other means.

228 Controls in detailUseful featuresSystem self-check
Initially, after turning the key in starter
switch to position2, malfunctions are de-
tected and indicated (the indicator lamps
in the SOS button, the Roadside Assis-
tance button
•
and the Information
button
¡
stay on longer than
10 seconds or do not come on). The mes-
sage
Tele Aid defective! Visit work-
shop! appears for approx. 10 seconds in
the multifunction display.Emergency calls
An emergency call is initiated automatical-
ly:


following an accident in which the
emergency tensioning devices (ETDs)
or airbags deploy


if the anti-theft alarm or the tow-away
alarm stays on for more than
20 seconds, see “Anti-theft systems”
(page 79) and see “Tow-away alarm”
(page 81).
An emergency call can also be initiated
manually by opening the cover next to the
inside rear view mirror labeled SOS, then
briefly pressing the button located under
the cover. See below for instructions on
initiating an emergency call manually.
Once the emergency call is in progress, the
indicator lamp in the SOS button will begin
to flash. The message
Emergency call –
Connecting call
appears in the multifunc-
tion display.
Warning!
G
If the indicator lamps in the SOS button, in
the Roadside Assistance button and/or in
the Information button do not come on dur-
ing the system self-check or if any of these
indicators remain illuminated constantly in
red and/or the message
Tele Aid defec-
tive! Visit workshop! is displayed in
the multifunction display after the system
self-check, a malfunction in the system has
been detected.
If a malfunction is indicated as outlined
above, the system may not operate as ex-
pected. Have the system checked at the
nearest Mercedes-Benz Center as soon as
possible.

236 Controls in detailUseful features
Programming or reprogramming the in-
tegrated remote control
Turn key in the starter switch to
position1 or2.

Hold the end of the hand-held transmit-
ter of the device you wish to train
approximately 2 to 5 inches (5 cm to
12 cm) away from the surface of the in-
tegrated remote control located on the
inside rear view mirror, keeping the in-
dicator lamp in view.

Using both hands, simultaneously push
the hand-held transmitter button and
the desired integrated remote control
button. Do not release the buttons until
completing next step.

The indicator lamp on the integrated
remote control will flash, first slowly
and then rapidly. The rapid flashing
lamp indicates successful program-
ming of the new frequency signal.

When the indicator lamp flashes rapid-
ly, release both buttons.

To program the remaining two buttons,
repeat the above steps.
iFor operation in the USA only: This de-
vice complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any inter-
ference received, including interfer-
ence that may cause undesired
operation.
Any unauthorized modification to this
device could void the user’s authority
to operate the equipment.
iIf, after several attempts, you do not
successfully program the integrated re-
mote control device to learn the signal
of the hand-held transmitter, the ga-
rage door opener could be equipped
with the “rolling code feature”.

377 Index
GPS 363
GPS see COMAND* 233
H
Hand-held transmitter
Programming integrated remote con-
trol 236
Hands-free microphone 27
Hard plastic trim items
Cleaning 273
Hazard warning flasher 108
Switching off 108
Switching on 108
Head restraints 97
Headlamp cleaning system* 259
Headlamps
Automatic control 106
Bi-Xenon 361
Cleaning 271
Cleaning system* 151, 259
Refilling washer fluid 259
Switching off 51
Switching on 46
Washer fluid 357
Washer system* 357
Headliner
Cleaning 273Heated seats* 101
Height adjustment
Head restraints 36
Steering wheel 37
High beam flasher 47, 108
High beam headlamps
Messages in display 298
Replacing bulbs 317, 319
Switching on 108
High mounted brake lamp 317
Hood 253
Closing 254
Message in display 296
Opening 253
Hydroplaning 245
I
Identification labels 342
Ignition 31, 33
Switching on 44
Immobilizer 79
Activating 79
Deactivating 79
Indicator lamps see Lamps, indicator and
warningInfant and child restraint systems 66
Installing 70
LATCH child seat mounts 71
Information
About service and warranty 10
Button for Tele Aid* 232
Inside rear view mirror
Adjusting 38
Antiglare 149
Installing
Infant and child restraint systems 70
Towing eye bolt 336
Wiper blades 323
Instrument cluster 22, 111, 363
Cleaning 273
Coolant temperature display 112
Illumination 111
Lamps in 276–280
Multifunction display 114
Outside temperature indicator 113
Selecting language 127
Instruments and controls see Cockpit 20

384 IndexRear fog lamp 317
Bulb 317
Switching on 107
Rear lamp bulbs
Replacing 322
Rear lamps see Tail lamps
Rear passenger compartment
Adjustable air vents 164
Rear seat head restraints
Folding back with release button 99
Folding back with switch 98
Installing 99
Placing upright 99
Rear seats 98
Removing 99
Rear seats
Rear seat head restraints 98
Rear view mirror automatic antiglare 149
Rear view mirrors see Mirrors
Rear window
Blocking operation 72
Rear window defroster 162
Activating 162
Deactivating 162
Rear window sunshade* 153Reconnecting
Vehicle battery 331
Refrigerant
Air conditioning 353
Regular checks 252
Reinstalling vehicle battery 330
Remote controls
Integrated 236
SmartKey 84
SmartKey with KEYLESS-GO* 88
Remote door unlock
With Tele Aid* 234
Remote Vehicle Diagnostics 365
Removing
Ski sack 215
Vehicle battery 330
Wheel 326
Wiper blades 323Replacing
Backup lamp bulbs 322
Brake lamp bulbs 322
Bulbs 316
Front lamp bulbs 318
Front turn signal bulbs 319
Fuses 338
High beam bulbs 319
License plate lamp bulbs 322
Low beam bulbs 319
Parking lamp bulbs 319, 321
Rear fog lamp bulbs 322
Rear lamp bulbs 317, 322
Rear turn signal bulbs 322
Side marker lamp bulbs 321
Standing lamp bulbs 319, 321
Wiper blades 323
Reporting
Safety defects 18
Reset knob in the instrument cluster 124