Page 236 of 394

236 Controls in detailUseful features
Programming or reprogramming the in-
tegrated remote control
Turn key in the starter switch to
position1 or2.
Hold the end of the hand-held transmit-
ter of the device you wish to train
approximately 2 to 5 inches (5 cm to
12 cm) away from the surface of the in-
tegrated remote control located on the
inside rear view mirror, keeping the in-
dicator lamp in view.
Using both hands, simultaneously push
the hand-held transmitter button and
the desired integrated remote control
button. Do not release the buttons until
completing next step.
The indicator lamp on the integrated
remote control will flash, first slowly
and then rapidly. The rapid flashing
lamp indicates successful program-
ming of the new frequency signal.
When the indicator lamp flashes rapid-
ly, release both buttons.
To program the remaining two buttons,
repeat the above steps.
iFor operation in the USA only: This de-
vice complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any inter-
ference received, including interfer-
ence that may cause undesired
operation.
Any unauthorized modification to this
device could void the user’s authority
to operate the equipment.
iIf, after several attempts, you do not
successfully program the integrated re-
mote control device to learn the signal
of the hand-held transmitter, the ga-
rage door opener could be equipped
with the “rolling code feature”.
Page 237 of 394

237 Controls in detail
Useful features
Rolling code programming
To train a garage door opener (or other roll-
ing code devices) with the rolling code fea-
ture, follow these instructions after
completing the “Programming” portion of
this text. (A second person may make the
following training procedures quicker and
easier.)
Locate training button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
If there is difficulty locating the trans-
mitting button, refer to garage door
opener operator’s manual.
Press “training” button on the garage
door opener motor head unit.
The “training light” is activated.You have 30 seconds time to initiate the
following step.
Firmly press and release the pro-
grammed integrated remote control
transmit button.
Press and release same button a sec-
ond time to complete the training pro-
cess.
Some garage door openers may require
you to do this procedure a third time to
complete the training.
Confirm the garage door operation by
pressing the programmed button on
the integrated remote control transmit-
ter. Canadian programming
During programming, your hand-held
transmitter may automatically stop trans-
mitting.
Continue to press and hold the inte-
grated remote control transmitter but-
ton (refer to steps two through four in
the “Programming” portion) while you
press and re-press (“cycle”) your
hand-held transmitter every two sec-
onds until the frequency signal has
been learned.
Upon successful training, the indicator
lamp will flash slowly and then rapidly
after several seconds.
Page 238 of 394
238 Controls in detailUseful featuresOperating the remote control
Turn key in starter switch to position1
or2.
Select and press the appropriate but-
ton to activate the remote controlled
device.
The integrated remote control trans-
mitter continues to send the signal as
long as the button is pressed – up to
20 seconds.Erasing the remote control memory
Turn key in starter switch to position1
or2.
Simultaneously hold down the left and
right side buttons for approximately
20 seconds, or until the indicator lamp
blinks rapidly.
The codes of all three channels are
erased.iIf you sell your vehicle, erase the codes
of all three channels.
Page 251 of 394

251 Operation
At the gas station
At the gas station
The fuel filler flap is located on the
right-hand side of the vehicle towards the
rear. Locking/unlocking the vehicle with
the remote control or the SmartKey with
KEYLESS-GO* automatically locks/un-
locks the fuel filler flap.
Remove the key from the starter
switch.
Open the fuel filler flap by pushing at
the point indicated by the arrow.
The fuel filler flap springs open.
Turn the fuel cap to the left and hold on
to it until possible pressure is released.
Take off the cap and set it in the recess
on the fuel filler flap.
To prevent fuel vapors from escaping
into open air, fully insert filler nozzle
unit.
Only fill your tank until the filler nozzle
unit cuts out – do not top up or overfill.
Replace the fuel cap by turning it to the
right.
You will hear when the fuel cap is tight-
ened.
Close the fuel filler flap.
Warning!
G
Gasoline is highly flammable and poisonous.
It burns violently and can cause serious inju-
ry. Whenever you are around gasoline, avoid
inhaling fumes and skin contact, extinguish
all smoking materials. Never allow sparks,
flame or smoking materials near gasoline!
Warning!
G
Overfilling of the fuel tank may create pres-
sure in the system which could cause a gas
discharge. This could cause the gas to spray
back out when removing the fuel pump noz-
zle, which could cause personal injury.iOnly use premium unleaded gasoline
with a minimum Posted Octane Rating
of 91 (average of 96 RON / 86 MON).
Information on gasoline quality can
normally be found on the fuel pump.
More information on gasoline can be
found in the Factory Approved Service
Products pamphlet.
Page 365 of 394

365 Technical terms
Remote Vehicle Diagnostics
Transmission of vehicle data and cur-
rent location to the Mercedes-Benz
Customer Assistance Center for sub-
scribers to Tele Aid service.
REST
(Residual engine heat utilization)
Feature that uses the engine heat
stored in the coolant to heat the vehi-
cle interior for a short time after the en-
gine has been turned off.
Restraint systems
Seat belts, belt tensioners, airbags and
child restraint systems. As indepen-
dent systems, their protective func-
tions complement one another.RON
(R
esearch O
ctane N
umber)
The Research Octane Number for gaso-
line as determined by a standardized
method. It is an indication of a gaso-
line's ability to resist undesired detona-
tion (knocking). The average of both
the ->MON (Motor Octane Number)
and RON (Research Octane Number) is
posted at the pump, also known as
ANTI-KNOCK INDEX.Shift lock
When the vehicle is parked, this lock
prevents the transmission selector le-
ver from being inadvertently moved out
of positionP without key turned and
brake pedal depressed.
Speedshift
Steering wheel gearshift control and
manual shift program. In the manual
shift program mode you can change
the gears yourself on the steering
wheel or by using the selector lever.
SRS
(S
upplemental R
estraint S
ystem)
Seat belts, emergency tensioning de-
vice and airbags. Though independent
systems, they are closely interfaced to
provide effective occupant protection.
Page 374 of 394

374 Index
Resetting stored speed 202
Sensor cover 271
Setting a higher speed 201
Setting a slower speed 202
Setting following distance 203
Setting the current speed 201
Warning and indicator lamps 198
Door control panel 28
Door entry lamps 110
Door handle 28
Door unlock
With Tele Aid* 234
Doors
Message in display 292
Opening from inside vehicle 92
Opening from outside 85, 89
Downhill driving
Cruise control 194
Downshifting 142
Steering wheel gearshift control 148
Drinking and driving 241Driving
General instructions 40, 241
Hydroplaning 245
In winter 246
Problems 49
Safety systems 74
Through standing water 247
Traveling abroad 247
With Distronic* 205
Driving instructions 241
Driving off 243
Driving safety systems
ABS 74
BAS 76
ESP 76
Driving systems 193
Cruise control 193
Distronic* 196
Driving safety systems 74
DTR see Distronic* 362E
Easy-entry/exit feature 97
Activating 133
Interrupting movement 134
Electrical fuses 337
Electrical system
Technical data 348
Electronic Stability Program see ESP 23,
76
Electronic stability program see ESP 363
Emergency call
Telephone 185
Emergency call system* 227
Emergency calls
Initiating an emergency call 230
With Tele Aid* 228
Emergency operation (Limp Home Mode)
146
Emergency operations
Closing sliding/pop-up roof 314
Locking the vehicle 311
Opening sliding/pop-up roof 314
Remote door unlock 234
Unlocking the trunk lid 311
Unlocking the vehicle 310
Page 376 of 394

376 IndexFront lamps
Messages in display 296–299
Replacing bulbs 317, 318
Switching on 105
Front seat head restraints
Installing 98
Power seat 98
Removing 98
Front seats
Heater* 101
FSS (Flexible Service System) 266, 363
Fuel 251
Additives 354
Fuel reserve warning lamp 280
Gasoline additives 354
Premium unleaded gasoline 251, 352,
354
Requirements 354
Reserve warning 23
Technical data 351
Fuel additives 354
Fuel consumption statistics
After start 136
Since last reset 137Fuel filler flap 251
Locking 251
Opening 313
Unlocking 251
Fuel requirements 354
Fuel reserve tank
Message in display 296
Fuel tank
Capacity 352
Filler flap 251
Fuels, coolants, lubricants etc.
Capacities 351
Functions (control system) 115, 118
Resetting 124
Fuse box 337
Fuse chart 337
Fuse extractor 338
Fuses 337
Auxiliary fuse box in trunk 338
Fuse box in engine compartment 337
Fuse box in passenger compartment
337
Fuse chart 337
Fuse extractor 338
Spare fuses 338G
Garage door opener 27, 235
Erasing in remote control 238
Integrated remote control 236
Rolling code programming 237
Gasoline see Fuel 251
Gasoline additives 354
Gear range 363
Automatic transmission 143
Limiting 143
Shifting into optimal 142
Gear range limit
Canceling 142
Gear selector lever
Cleaning 273
Position 144
Global
Locking 85
Locking with KEYLESS-GO* 90
Unlocking 85
Unlocking with KEYLESS-GO* 89
Global Positioning System (GPS) 363
Glove box 21, 219
Closing 219
Opening 219
Good visibility 149
Page 377 of 394

377 Index
GPS 363
GPS see COMAND* 233
H
Hand-held transmitter
Programming integrated remote con-
trol 236
Hands-free microphone 27
Hard plastic trim items
Cleaning 273
Hazard warning flasher 108
Switching off 108
Switching on 108
Head restraints 97
Headlamp cleaning system* 259
Headlamps
Automatic control 106
Bi-Xenon 361
Cleaning 271
Cleaning system* 151, 259
Refilling washer fluid 259
Switching off 51
Switching on 46
Washer fluid 357
Washer system* 357
Headliner
Cleaning 273Heated seats* 101
Height adjustment
Head restraints 36
Steering wheel 37
High beam flasher 47, 108
High beam headlamps
Messages in display 298
Replacing bulbs 317, 319
Switching on 108
High mounted brake lamp 317
Hood 253
Closing 254
Message in display 296
Opening 253
Hydroplaning 245
I
Identification labels 342
Ignition 31, 33
Switching on 44
Immobilizer 79
Activating 79
Deactivating 79
Indicator lamps see Lamps, indicator and
warningInfant and child restraint systems 66
Installing 70
LATCH child seat mounts 71
Information
About service and warranty 10
Button for Tele Aid* 232
Inside rear view mirror
Adjusting 38
Antiglare 149
Installing
Infant and child restraint systems 70
Towing eye bolt 336
Wiper blades 323
Instrument cluster 22, 111, 363
Cleaning 273
Coolant temperature display 112
Illumination 111
Lamps in 276–280
Multifunction display 114
Outside temperature indicator 113
Selecting language 127
Instruments and controls see Cockpit 20