Page 291 of 376
291 Practical hints
Replacing bulbs
Rear lamps Notes on bulb replacement
Use only 12 volt bulbs of the same type
and with the specified watt rating.
Switch lights off before changing a bulb
to prevent short circuits.
Always use a clean lint-free cloth when
handling bulbs.
Your hands should be dry and free of oil
and grease.
If the newly installed bulb does not light
up, visit an authorized Mercedes-Benz
Center.
Have the LEDs and bulbs for the follow-
ing lamps replaced by an authorized
Mercedes-Benz Center:
Additional turn signal lamps in the
exterior rear view mirrors
High mounted brake lamp
Xenon lamps
Front fog lamps
Lamp
Type
7
High mounted brake
lamp
LED
8
Brake lamp
P21W
9
Turn signal lamp
PY 21 W
10
Backup lamp
P21W
11
Tail, parking,
standing and side
marker lamp
R5W
12
License plate lamps
C5W
13
Rear fog lamp,
driver’s side
P21W
Warning!
G
Keep bulbs out of reach of children.
Bulbs and bulb sockets can be very hot. Al-
low the lamp to cool down before changing
a bulb.
Halogen lamps contain pressurized gas.
A bulb can explode if you
touch or move it when hot
drop the bulb
scratch the bulb
Wear eye and hand protection.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.
Page 292 of 376
292 Practical hintsReplacing bulbsReplacing bulbs for front lamps
Halogen headlamps
1Bulb socket for turn signal lamp
2Headlamp cover for high beam head-
lamp, parking and standing lamp
3Headlamp cover for low beam head-
lamp4Low beam headlamp bulb
5High beam headlamp bulb
6Bulb socket for parking and standing
lamp bulb
Low and high beam bulb
Switch off the lights.
Open the hood (
page 235).
Press the clamp and remove headlamp
cover2 or 3.
Pull electrical connector off.
Unclip the retainer springs and take out
the bulb.
Insert the new bulb so that the base
locates in the recess on the holder.
Clip the retainer springs and plug the
connector onto the bulb.
Align headlamp cover2 or 3 and click
into place.
Front turn signal lamp bulb
Switch off the lights.
Open the hood (
page 235).
Twist bulb socket1 counterclockwise
and pull out.
Push bulb into socket, turn counter-
clockwise and remove.
Insert new bulb in socket, push in and
twist clockwise.
Reinsert bulb socket in lamp and twist
clockwise.
Page 293 of 376
293 Practical hints
Replacing bulbs
Parking and standing lamp bulb
Switch off the lights.
Open the hood (
page 235).
Press the clamp and remove headlamp
cover2.
Pull out the bulb socket6 with the
bulb.
Pull the bulb out of the bulb socket.
Insert a new bulb in the socket.
Reinstall the bulb socket.
Align headlamp cover2 and click into
place.Bi-Xenon* headlamps
1Bulb socket for turn signal lamp
2Headlamp cover for high beam head-
lamp, parking and standing lamp
3Headlamp cover for Bi-Xenon lamp4High beam headlamp bulb
5Bayonet socket for high beam
headlamp bulb
6Bulb socket for parking and standing
lamp bulb
High beam bulb
Switch off the lights.
Open the hood (
page 235).
Press the clamp and remove headlamp
cover2.
Pull electrical connector4 off.
Warning!
G
Do not remove the cover3 for the Bi-Xenon
headlamp. Because of high voltage in
Bi-Xenon lamps, it is dangerous to replace
the bulb or repair the lamp and its compo-
nents. We recommend that you have such
work done by a qualified technician.
Page 294 of 376
294 Practical hintsReplacing bulbs
Twist bayonet socket5 counterclock-
wise to the stop (do not remove).
Pull the bulb out of the socket.
Insert the new bulb so that the base
locates in the recess in the bayonet
socket5.
Twist bayonet socket clockwise until
you hear it snap into place.
Plug the connector onto the bulb.
Align headlamp cover2 and click into
place.
Front turn signal lamp bulb
Switch off the lights.
Open the hood (
page 235).
Twist bulb socket1 counterclockwise
and pull out.
Push bulb into socket, turn counter-
clockwise and remove.
Insert new bulb in socket, push in and
twist clockwise.
Reinsert bulb socket in lamp and twist
clockwise.
Parking and standing lamp bulb
Switch off the lights.
Open the hood (
page 235).
Press the clamp and remove headlamp
cover2.
Pull out the bulb socket6 with the
bulb.
Pull the bulb out of the bulb socket.
Insert a new bulb in the socket.
Reinstall the bulb socket.
Align headlamp cover2 and click into
place.
Side marker lamp bulb
Switch off the lights.
Carefully slide lamp towards rear.
Remove front end first.
Twist bulb socket counterclockwise
and pull out.
Pull bulb out of the bulb socket.
Insert new bulb in socket.
Reinstall bulb socket, push in and twist
clockwise.
To reinstall lamp, set rear end in
bumper and let front end snap into
place.
Page 295 of 376
295 Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Tail lamp assemblies
Switch off lights.
Open trunk lid.
1Locking lever
Fold trim to the side.
Turn locking lever1 to vertical position
and remove bulb carrier.2Rear fog lamp, driver’s side
3Back up lamp
4Stop lamp
5Turn signal lamp
6Tail, parking, standing and side marker
lamp
Gently push bulb into socket, turn
counterclockwise and remove.
Insert new bulb and turn clockwise.
Reinstall bulb socket.
Reinstall bulb holder and close trim
panel.License plate lamp
1Screw
Switch off the lights.
Loosen both screws1 and remove
lamp.
Replace the tubular lamp and reinstall
lamp.
Retighten the screws.
Page 349 of 376
349 Index
Automatic transmission 138
Accelerator position 143
Emergency operation
(Limp Home Mode) 143
Fluid level 238
Gear ranges 140
Gear selector lever position 141
Gear shifting malfunctions 143
Kickdown 143
Manual shifting 139
One-touch gearshifting 139
Program mode selector switch 142
Selector lever position 138
Starting with 44
Transmission fluid 238
Winter program mode 142
Auxiliary fuse box 313
B
BabySmart
TM
Airbag deactivation system 67, 341
Compatible child seats 67, 341
Self-test 67
Backrest
Folding forward 200
Folding rearward 200
Backrest tilt 33Backup lamps 291, 295
Bulbs 291
BAS 74, 341
Messages in display 263
Batteries, SmartKey
Changing 286, 287
Check lamp 85
Checking 86
Battery discharged
Jump starting 306
Battery, vehicle 240, 303
Charging 304
Disconnecting 304
Messages in display 278
Reconnecting 305
Reinstalling 304
Removing 304
Bi-Xenon headlamps* 341
Bi-Xenon type*
Front lamp bulbs 293
Block heater 246
Blocking
Rear door window operation 71
Bolts
For Minispare wheel 284
For spare wheel 282Brake assist system (BAS) 341
Brake fluid 332
Checking 234
Brake lamp bulbs 291
Brake lamp, high mounted 291
Brake pads
Message in display 265
Brakes 224
Warning lamp 258
Break-in period 222
Bulbs, replacing 290
Additional turn signals 290
Backup lamps 291
Brake lamps 291
Fog lamps 290
Front lamps 290
High beam 290
High mounted brake lamp 291
License plate lamps 291, 295
Low beam 290
Parking lamps 290, 291, 293, 294
Rear fog lamp 291, 295
Side marker lamps 290, 294
Standing lamps 290, 291, 293, 294
Tail lamp assemblies 291, 295
Turn signal lamps 290, 291
Page 354 of 376
354 Index
Messages in display 269
Switching off 76
Switching on 77
Warning lamp 256
ETD 64, 342
Safety guidelines 59
Ethanol fuel
At the gas station 233
Requirements 334
Switching fuels 334
Exterior lamp switch 47, 101
Exterior lamps
Delayed shut-off 126
Exterior rear view mirrors
Adjusting 39
Parking position* for 131
F
Fahrenheit
Setting temperature units 123
Fastening the seat belts 41
Fine adjustment
Cruise control 195
First aid kit 279
Flat tire 297
Lowering the vehicle 301
Mounting the spare wheel 297Preparing the vehicle 297
Spare wheel 281
Flexible fuel vehicles 334
At the gas station 233
Switching fuels 334
Flexible Service System (FSS) 247, 342
Fog lamp, rear 103, 291
Fog lamps
Replacing bulbs 290
Fog lamps, front 103
Messages in display 274
Replacing bulbs 291
Switching on 103
Four wheel electronic traction system
(4MATIC) with ESP 78
4MATIC 78
Front airbags 60
Front lamps
Bi-Xenon type* 293
Halogen-type 292
Messages in display 272–275
Replacing bulbs 290, 292
Switching on 101
Front seat head restraints
Installing 94
Manual seat 94Power seat* 94
Removing 94
Front seats
Heater* 97
FSS (Flexible Service System) 247, 342
Fuel 234
Additives 334
Cruising range 335
E85 (Ethanol fuel) 335
Fuel reserve warning lamp 259
Gasoline additives 334
Premium unleaded
gasoline 234, 330, 333
Requirements 333, 334
Reserve warning 23
Switching (Flexible fuel vehicle) 334
Technical data 329
Fuel additives 334
Fuel consumption statistics
After start 132
Since last reset 132, 133
Fuel filler flap 233
Locking 233
Opening 287
Unlocking 233
Page 355 of 376
355 Index
Fuel requirements 333
For ethanol fuel 334
Fuel reserve tank
Message in display 272
Fuel tank
Capacity 330
Filler flap 233
Fuels, coolants, lubricants etc.
Capacities 329
Functions (control system) 112, 115
Resetting 120
Fuse box 312
Fuse chart 312
Fuse extractor 313
Fuses 312
Auxiliary fuse box in the trunk 313
F us e box in e ng ine com pa rtm ent 3 12
Fuse box in passenger
compartment 312
Fuse chart 312
Fuse extractor 313
Spare fuses 313G
Garage door opener 27, 217
Erasing in remote control 220
Integrated remote control 218
Rolling code programming 219
Gasoline see Fuel 234
Gasoline additives 334
Gear range 342
Automatic transmission 140
Limiting 140
Shifting into optimal 139
Gear range limit
Canceling 139
Gear selector lever
Cleaning 252
Position 141
Global
Locking 85
Unlocking 85
Global Positioning System (GPS) 342
Glove box 21, 203
Closing 203
Opening 203
Good visibility 144
GPS 342
GPS see COMAND* 210H
Halogen-type
Front lamp bulbs 292
Hand-held transmitter
Programming integrated remote
control 218
Hands-free microphone 27
Hard plastic trim items
Cleaning 252
Hazard warning flasher 104
Switching off 104
Switching on 104
Head restraints 94
Manual seats 33
Power seats* 35
Rear seats 35
Headlamp cleaning system* 241
Headlamp shut-off delay
see Delayed shut-off, exterior lamps
Headlamps
Automatic control 102
Bi-Xenon type*
Replacing bulbs 293
Bi-Xenon* 341
Cleaning 251
Cleaning system* 146, 241, 338
