2003 MAZDA MODEL TRIBUTE clock

SWITCHES/LOCKS
Always check the Owner’s Manual for more operating information and safety features
Manual door locks
Lock button
To lock: Press lock
To unlock front doors: Pull inside
door handle
To unlock rear doors: Press unlock
Power door locks
1. Master front door lock
switch
To lock/unlock all doors: Press
/ on driver’s door switch
To lock doors without key:
With door open, press
on driver’s door switch, exit
vehicle, close doors
Manual locks override
power locks
Power windows
Operate with ignition in
ON position
All windows may be controlled
from driver’s door; each passenger
door has a separate switch
2. Driver’s window
One-touch-down: Press rear
of switch firmly and release,
window goes down all the
way; tap switch again to stop;
press and hold for normal
operation; press and hold
front of switch to close
3. Passenger window
switches
Press rear/front of switch
to open/close4. Power window lockout
switch
Press right side of switch:
only driver’s switches control
windows; press left side of
switch and passenger controls
function again
Tip: Power windows can be
operated for 10 minutes
after key is off and with
doors closed
Remote
keyless entry
system*
Functions only
with ignition in
OFF position
1. Lock
Press button; pressing again
within 3 seconds causes doors
to relock, horn to beep
2. Unlock
Press to open driver’s door;
press again within 3 seconds
to open other doors
3. Panic alarm
Press horn sounds; press
again to stop, or turn ignition
to ON or ACC position
Illuminated entry system*
Press UNLOCK or PANIC button
on remote entry transmitter,
interior lights come on; lights
turn off after 30 seconds or with
ignition in ON or ACC position
Liftgate
To lock/unlock: Put key in
lock and turn counterclockwise/
clockwise; or press power door
lock button
To open liftgate window:
Pull up on right side handle
To open liftgate: Pull up on left
side handleChild-safety
locks
Located at the
edge of rear doors
To activate: Rotate
knob to
To cancel: Rotate
knob in
opposite direction
WARNING: Since children
may access either rear door,
child-safety locks for both rear
doors should be activated
Switches/
Locks
Locks
Quick Tips Mazda 2003 Tribute page 8
page 9
Revised September 25, 2002
AUTO
3 2
1
4
12
3
5. Dual power
mirrors
To adjust left/right
mirror: Rotate control
switch left/right, tilt
in direction of desired
mirror movement
Tip: To lock mirrors in
place, move control switch
to center position
*Denotes optional equipment
5

SEATS
Always check the Owner’s Manual for more operating information and safety features
Front seat
shoulder
belt height
adjustment
To raise/lower
belt: Slide up/
push release button
(1) and slide down
WARNING: Make sure
adjuster locks in one
of its positions
Manual controls
1. Fore/aft adjustment
Raise lever and hold, slide
seat, release lever
2. Seatback angle/tilt
slide seats
To adjust seatback: Lift and hold
lever, lean forward or back-
ward to tilt seat, release lever
To slide unoccupied seat: Lift
lever to unlock, fold seatback
down and slide seat forward
To lock seat: Move to desired
position and raise seatback
to upright position 3. Manual lumbar adjustment
Rotate clockwise/counterclock-
wise to increase/decrease
firmness
4. Head restraint
To raise/lower: Pull up/
hold release button (9)
and push down
Power driver’s seat*
5. Raise/lower front of seat
Pull/push front of switch
up/down
6. Fore/aft adjustment
Slide entire switch horizontally
Raise/lower seat cushion
Pull/push entire switch
vertically
Seats
Seats
Quick Tips Mazda 2003 Tribute page 10
page 11
Revised September 25, 2002
*Denotes optional equipment
7. Raise/lower rear of seat
Pull/push back of switch
up/down
Tip: Side-impact air bags*
deploy from outboard
side of driver and front
passenger seatbacks
8. Heated seats*
Press to activate/
deactivate
Folding rear seat,
see Owner’s Manual
9
765
3
1
2
4
8
1
WARNINGS: Do not adjust
seats while driving
Safety belts must always
be worn when vehicle is
in motion
All air bags are supplemental
and do not replace safety
belt usage
Always wear your safety
belt and properly secure
children 12 and under
in the rear seat

CHILD-SAFETY SEATS
Always check the Owner’s Manual for more operating information and safety features
1. Fan control
To increase speed and flow:
Rotate knob clockwise
2. Air flow selections
= air to dash
= air to dash and floor
OFF = system off, no air flow
= air to floor
= air to floor and
windshield
= defrost, air to
windshield
3. Temperature selection
Cooler/warmer = rotate knob
counterclockwise/clockwiseAir conditioning system
MAX A/C= cooling with inside
air, air to dash only
A/C= cooling with outside air,
air to dash only
Control positions for
maximum defrost
Fan to maximum, temperature
to maximum hot, air flow selector
knob to
Tips: To prevent moisture
buildup, never drive
with system off
To help prevent windshield
fogging in humid weather,
select DEF before starting
engine
Child-Safety
Seats
Climate
Controls
Quick Tips Mazda 2003 Tribute page 12
page 13
Revised September 25, 2002
A/COFF
MAX
A/C
123
*Denotes optional equipment
Child-safety seat
To install in rear outboard
passenger seat positions using
dual-locking mode retractorsafety
belts; see Owner’s Manual for
proper installation and seat tether
and LATCH system instructionsWARNINGS: Use age
appropriate child restraints,
see Owner’s Manual and
state or province laws
Never place rear-facing
infant-safety seat in front
of any air bag, an infant
is in serious danger of
being injured or killed
If you choose to install a
forward-facing child-safety
seat in the front seating
position, move vehicle seat
as far back as possible
Rear child-safety seat
anchors
Anchors located on rear seat
cushion for securing child-safety
seat (see Owner’s Manual)Dual locking mode lap/
shoulder belt retractor
(front passenger and rear
outboard belts only)
Emergency locking mode: Belt
locks only on hard braking/
cornering or impacts of about
5 mph or higher
Automatic locking mode must
be used when installing child-
safety seat
To activate: Pull webbing fully out
of retractor until click is heard;
belt will only tighten
To disengage: Unbuckle belt
and allow webbing to retract
fully; for complete details see
Owner’s Manual

RADIO/CASSETTE/COMPACT DISC
Always check the Owner’s Manual for more operating information and safety features
6. LOAD*
Single CD: Press button, WAIT
will appear; when IN appears
and CD door opens, load CD
Multiple CD: Press and hold
LOAD until beep is heard; when
IN is displayed load CD; when
IN displays again load next CD
7. FM1/2
Press to select between FM1/FM2
station preset buttons (4)
8. AM
Press to select AM frequency band
9. CD: Press to play CD
10. MD*/Tape*
Press to play Mini-disc Player/
cassette tape
11. Clock
To set: Press (11) and hold until
beep is heard; press upper/
lower portion of (13) to advance
Hours/Minutes; press (11)
again to set12. CD eject button
13. Scan/Auto-Memory
Press to briefly sample next
listenable selections
Radio: Press and hold until a
beep is heard; system auto-
matically scans and temporarily
stores six strong stations in each
band; press again to cancel
14. Fast forward
Press to fast forward through
a track
15. Reverse
Press to reverse through a track
16. Tuning/Audio Control
Tune: Rotate counterclock-
wise/clockwise for lower
frequency/higher frequency
Audio control: Press to select
BASS/MID/TREBLE/FADE/
BALANCE; rotate right/left
to adjust selected feature
1. Power/Volume
Press to turn on/off; rotate
to increase/decrease volume
2. Disc up
†
Press to skip forward to
beginning of next CD
3. Disc down
†
Press to skip back to beginning
of previous CD
4. Memory preset buttons
To set: Tune to station, press
and hold until beep is heard
5. SEEK/TRACK/APC
Radio: Press to
automatically seek higher/
lower frequency
CD: Press to select
next/previous track
Tape: Press to
automatically advance tape to
beginning of next selection/
replay selection; to stop this
operation, press button again
Audio
Systems
Audio
Systems
Quick Tips Mazda 2003 Tribute page 14
page 15
Revised September 25, 2002
*Denotes optional equipment†For use with cassette tape player,
MD player, or CD changer*
SEEK
TRACK
APC
1 DISC 2 DISC 3 RPT 4 PROG
RDM56 FM1/2 AM CD MD/TAPE CLOCKH SCAN
M AUTO-M
TUNE
PRESS AUDIO CONTVOLPUSH POWER
DISC IN
RPT RDM
MTL AFM12
ST MCD CHCD IN
MD IN AUTO-M123456
1917182120
7891011
5
3
2
116
12
13
14
15
LOAD
4 6
AM/FM/Cassette Tape/CD Player/Changer*
17. Cassette door*
18. Eject button*
19. Program Random
†Press to enable/cancel
random play
20. Repeat
Press to replay current CD/
tape selection
21. Dolby
®Noise Reduction*
Reduces tape noise and hiss;
press to activate/deactivate Tip: Clean cassette mechanism after 10–12 hours or less
of use with Cassette Cleaning Cartridge