SECTION 6 ± 4
SERVICE PROCEDURES AND
SPECIFICATIONS
Electrical components
Specifications 292. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking battery condition296 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery recharging precautions298 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking and replacing the blade type fuses299 . . . . . . . . . . . . . . . .
Checking the cartridge type fuses301 . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding washer fluid303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking the headlight aim303 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing light bulbs309 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADDING WASHER FLUID
64G009
If the washer tank becomes nearly empty, add washer
fluid.
You may use plain water as washer fluid. However, in cold
areas where temperatures range below the freezing point, use
washer fluid containing antifreeze. This product is available at
your Lexus dealer and most auto parts stores. Follow the
manufacturer's directions for how much to mix with water.
NOTICE
Do not use engine antifreeze or any other substitute
because it may damage your vehicle's paint.
CHECKING THE HEADLIGHT AIM
64G020d
1Beam angle gauge
(vertical movement for low beam)
2Beam angle gauge
(horizontal movement for low beam)
3Beam angle gauge
(vertical movement for high beam)
4Beam angle gauge
(horizontal movement for high beam)
Before checking the headlight aim:
1. Be sure that the body around the headlight is not deformed.
2. Park the vehicle on a level spot.
3. The driver gets into the driver's seat and puts the vehicle in
a state readying for a driving (with a full tank).
4. Bounce the vehicle several times.
