2003 Hyundai H-1 (Grand Starex) buttons

[x] Cancel search: buttons

height adjustment fuel type octane remote control charging winter tires

Page 63 of 173

Hyundai H-1 (Grand Starex) 2003 Owners Manual INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-24
C610A02P-GAG
Lever type23 4
1
There are four controls for the heating and coolin

Page 72 of 173

Hyundai H-1 (Grand Starex) 2003 Owners Manual 2-33
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
5. TUNE/SEEK Button
K210A01P-GAT
STEREO RADIO OPERATION (K220) (If installed)

Page 73 of 173

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-34 K210B01TB-GAT
1. POWER ON/OFF, VOLUME
1. POWER ON/OFF, VOLUME 1. POWER ON/OFF, VOLUME
1. POWER ON/OFF, VOLUME
1. POWER ON/OFF, VOLUME
Rotate the Power switch clockwise to turn on
the audio when the ignition switch is at ACC or ON position. Once the system is on, you canincrease or decrease the volume by rotating theknob clockwise or counter-clockwise.
oo
oo
o BALANCE
BALANCE BALANCE
BALANCE
BALANCE
Further pull the volume button and rotate clock-
wise to emphasize right sound speaker.
Or rotate counter-clockwise to emphasize left
sound speaker.
oo
oo
o SCAN Button
SCAN Button SCAN Button
SCAN Button
SCAN Button
When this button is pressed, the frequency will
be increased to be tuned to the next receivablestation one after another, receiving each stationfor 5 seconds. if the desirable station is tuned,press this button (scan) again to cancel scanfunction.
2. BASS/TREBLE-pull
2. BASS/TREBLE-pull 2. BASS/TREBLE-pull
2. BASS/TREBLE-pull
2. BASS/TREBLE-pull
Press this button to pop up. Rotate the knob
clockwise to increase the Bass and rotate tocounter-clockwise to decrease the Bass.
Further pull the button and rotate clockwise to
increase the Treble.
Or rotate counter-clockwise to decrease the
Treble. After adjustment press the button. 3. PRESET ( 1 ~ 6 )
3. PRESET ( 1 ~ 6 ) 3. PRESET ( 1 ~ 6 )
3. PRESET ( 1 ~ 6 )
3. PRESET ( 1 ~ 6 )
Press any of these buttons not more than 2seconds to listen to the station in memory.Press the preset button for 2 seconds or more,then the current station will be stored into thememory of the preset button.
4. LCD
4. LCD 4. LCD
4. LCD
4. LCD
LCD shows the following information; band ofFM1/FM2/AM/(L)/(M) frequency, preset chan-nel number, ST in case of FM Stereo.
5. TUNE
5. TUNE 5. TUNE
5. TUNE
5. TUNE
Press the button not more than 1 secondthen frequency is increased. Likewise pressthe button not more than 1 second to de-crease the frequency.
oo
oo
o SEEK
SEEK SEEK
SEEK
SEEK
Press the button for over 1 second, then itwill tune to the next receivable higher frequencystation. Likewise, press the button for over1 second then it will tune to the next receivablelower frequency station.If the selected station isin the preset memory, memorized channel willbe on the display too. 6. FM/AM Button
6. FM/AM Button 6. FM/AM Button
6. FM/AM Button
6. FM/AM Button
FM/AM band button, which is used to changethe band repeatedly in following manner. FM1 FM2 AM FM1
(FM1 FM2 M L FM1 : Europe)
7. Fader (If installed)
7. Fader (If installed) 7. Fader (If installed)
7. Fader (If installed)
7. Fader (If installed)
This button is located top side of the volume switch. Rotate clockwise to attenuate frontspeaker sound. Rotate counter-clockwise toattenuate rear speaker sound.

Page 76 of 173

Hyundai H-1 (Grand Starex) 2003 Owners Manual 2-37
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
K240A01TB
K240A01TB-GAT
STEREO RADIO OPERATION (H240, K240) (If installed)
STE

Page 77 of 173

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-38 K240B01TB-GAT
1. POWER ON/OFF, VOLUME
1. POWER ON/OFF, VOLUME 1. POWER ON/OFF, VOLUME
1. POWER ON/OFF, VOLUME
1. POWER ON/OFF, VOLUME
Press this button to turn on/off the audio when
the ignition switch is at ACC or ON position. Once the system is on, you can increase ordecrease the volume by rotating the knob clock-wise or counter-clockwise. Press this buttonagain to
turn it off.
2. TUNE
2. TUNE 2. TUNE
2. TUNE
2. TUNE
Press the button not more than 0.5 second
then frequency is increased. Likewise press the button not more than 0.5
second to decrease the frequency.
With the button held down for 0.5 sec or more,
the beep sound will be heard and frequency willincrease or decrease rapidly. if you release thebutton after the beep sound, seek function is inoperation.
oo
oo
o SEEK
SEEK SEEK
SEEK
SEEK
Press the button for over 0.5 second and
release the button after beep sound, then it willtune to the next receivable higher frequencystation. Likewise, press the button for over0.5 second and release the button after thebeep sound, then it will tune to the next receiv-able lower frequency station. if the selectedstation is in the preset memory, memorizedchannel will be on the display too. 3. PRESET
3. PRESET 3. PRESET
3. PRESET
3. PRESET
Press any of these buttons not more than 2seconds to listen to the station in memory.Press the preset button for 2 seconds or more,then the current station will be stored into thememory of the preset button with the sound.
4. SCAN Button
4. SCAN Button 4. SCAN Button
4. SCAN Button
4. SCAN Button
When this button is pressed, the frequency willbe increased to be tuned to the next receivablestation one after another, receiving each stationfor 5 seconds. if the desirable station is tuned,press this button (scan) again to cancel scanfunction.
5. BASS/BAL- pull
5. BASS/BAL- pull 5. BASS/BAL- pull
5. BASS/BAL- pull
5. BASS/BAL- pull
Press to pop the knob out, To increase thebass, rotate the knob clockwise, while to de-crease the Bass, rotate the knob counterclock-wise. Further pull the popped-ed knob for thebalance control. Rotate the knob clockwise toemphasize right speaker sound. (Left speakersound will be attenuated) When the controlknob is turned counter-clockwise, left speakersound will be emphasized. (Right speaker willbe attenuated) 6. TREB/pull-FAD
6. TREB/pull-FAD 6. TREB/pull-FAD
6. TREB/pull-FAD
6. TREB/pull-FAD
Press the pop the knob out and turn clockwiseto increase the treble or counterclockwise todecrease the treble. Further pull the popped-upknob for the Fader control. Turn the controlknob counter clockwise to emphasize frontspeaker sound. (Rear speaker sound will be attenuated) When the control knob is turned clockwise, rearspeaker sound will be emphasized. (Frontspeaker sound will be attenuated)
7. FM/AM Button
7. FM/AM Button 7. FM/AM Button
7. FM/AM Button
7. FM/AM Button
FM/AM band button, which is used to changethe band repeatedly in the following manner . FM1 FM2 AM FM1
(FM1 FM2 M L FM1 : Europe)
8. LCD
8. LCD 8. LCD
8. LCD
8. LCD
LCD shows the following information; band of FM1/FM2/AM frequency, preset channel num-ber, ST in case of FM Stereo.

Page 81 of 173

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-42 3.3.
3.3.
3. BASS Control Knob
BASS Control Knob BASS Control Knob
BASS Control Knob
BASS Control Knob
Press to pop the knob out and turn to the left or right for the desired bass tone.
TREB (Treble Control) Knob
TREB (Treble Control) Knob TREB (Treble Control) Knob
TREB (Treble Control) Knob
TREB (Treble Control) Knob
Pull the bass control knob further out. Turn tothe left or right for the desired treble tone.
4.4.
4.4.
4.
SCAN Button
SCAN Button SCAN Button
SCAN Button
SCAN Button
When the scan button is pressed, the fre-quency will increase and the receivable sta-tions will be tuned in one after another, receiv-ing each station for 5 seconds. To stop scan-ning, press the scan button again.
5. TUNE (Manual) Select Button
5. TUNE (Manual) Select Button 5. TUNE (Manual) Select Button
5. TUNE (Manual) Select Button
5. TUNE (Manual) Select Button
Press the ( ) side or ( ) side to increase or todecrease the frequency. Press either buttonand hold down to continuously scroll. Releasebutton once the desired station is reached.
SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel
Selection)
Selection) Selection)
Selection)
Selection)
Press the TUNE select button for 0.5 sec ormore, and releasing will automatically tune thenext available station with beep sound. When the ( ) side is pressed longer than 0.5 second and releasing will automatically tunethe next higher frequency and when the ( )side is pressed longer than 0.5 second andreleasing will automatically tune the next lowerfrequency. 6. BAND Selector
6. BAND Selector 6. BAND Selector
6. BAND Selector
6. BAND Selector
Pressing the button changes the AM, FM1and FM2 bands. The mode selected is dis-played on LCD.
7. PRESET STATION SELECT Button
7. PRESET STATION SELECT Button 7. PRESET STATION SELECT Button
7. PRESET STATION SELECT Button
7. PRESET STATION SELECT Button
Six (6) stations for AM, FM or FM2 respectivelycan be preset in the electronic memory circuiton this unit.
HOW TO PRESET STATIONS
HOW TO PRESET STATIONS HOW TO PRESET STATIONS
HOW TO PRESET STATIONS
HOW TO PRESET STATIONS
Six AM and twelve FM stations may be pro-grammed into the memory of the radio. Then,by simply pressing the band select button and/or one of the six station select buttons, you mayrecall any of these stations instantly. To pro-gram the stations, follow these steps:
o Press band selector to set the band for AM, FM or FM2.
o Select the desired station to be stored by seek, scan or manual tuning.
o Determine the preset station select button you wish to use to access that station.
o Press the station select button for more than two seconds. A select button indicator willshow in the display indicating which selectbutton you have depressed. The frequencydisplay will flash after it has been stored intothe memory.
H260B02E-AAT
1.1.
1.1.
1. POWER ON-OFF Control Knob
POWER ON-OFF Control Knob POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
The radio unit may be operated when the igni-
tion key is in the "ACC" or "ON" position. Pressthe knob to switch the power on. The LCDshows the radio frequency in the radio mode orthe CD track indicator in either the CD mode orCD AUTO CHANGER mode. To switch thepower off, press the knob again.
VOLUME Control
VOLUME Control VOLUME Control
VOLUME Control
VOLUME Control
Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise toreduce the volume.
BALANCE Control
BALANCE Control BALANCE Control
BALANCE Control
BALANCE Control
Pull and turn the control knob clockwise to
emphasize right speaker sound (Left speakersound will be attenuated). When the controlknob is turned counterclockwise, left speakersound will be emphasized. (Right speaker soundwill be attenuated)
2. FAD (Fader Control) Knob
2. FAD (Fader Control) Knob 2. FAD (Fader Control) Knob
2. FAD (Fader Control) Knob
2. FAD (Fader Control) Knob
Turn the control knob counterclockwise to em-
phasize front speaker sound. (Rear speakersound will be attenuated) When the controlknob is turned clockwise, rear speaker soundwill be emphasized. (Front speaker sound willbe attenuated)
FM/AM

Page 87 of 173

Page 88 of 173

Hyundai H-1 (Grand Starex) 2003 Owners Manual 2-49
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
H290B01P-GAT 1.1.
1.1.
1. POWER ON-OFF Control Knob
POWER ON-OFF Control Knob

2-49
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
H290B01P-GAT 1.1.
1.1.
1. POWER ON-OFF Control Knob
POWER ON-OFF Control Knob POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
The radio unit may be operated when the igni-
tion key is in the "ACC" or "ON" position. Press the button to switch the power on. The displayshows the radio frequency in the radio mode orthe tape direction indicator in the tape mode, orCD track either the CD mode or CD AUTOCHANGER mode. To switch the power off,press the button again.
VOLUME Control
VOLUME Control VOLUME Control
VOLUME Control
VOLUME Control
Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise toreduce the volume.
2.2.
2.2.
2.
BASS/BALANCE Control Knob
BASS/BALANCE Control Knob BASS/BALANCE Control Knob
BASS/BALANCE Control Knob
BASS/BALANCE Control Knob
BASS Control Knob
BASS Control Knob BASS Control Knob
BASS Control Knob
BASS Control Knob
Press to pop the knob out. To increase the
bass, rotate the knob clockwise, while to de-crease the bass, rotate the knob counterclock-wise.
BALANCE Control knob
BALANCE Control knob BALANCE Control knob
BALANCE Control knob
BALANCE Control knob
Further pull the popped-up knob. Rotate the
knob clockwise to emphasize right speakersound. (Left speaker sound will be attenuated)When the control knob is turned counterclock-wise, left speaker sound will be emphasized(Right speaker sound will be attenuated). 3.3.
3.3.
3. TREBLE/FAD Knob
TREBLE/FAD Knob TREBLE/FAD Knob
TREBLE/FAD Knob
TREBLE/FAD Knob
TREBLE Control Knob
TREBLE Control Knob TREBLE Control Knob
TREBLE Control Knob
TREBLE Control Knob
Press to pop the knob out and turn to the left or
right for the desired treble tone.
FAD (Fader Control) Knob (Minibus
FAD (Fader Control) Knob (Minibus FAD (Fader Control) Knob (Minibus
FAD (Fader Control) Knob (Minibus
FAD (Fader Control) Knob (Minibus
only)
only) only)
only)
only)
Further pull the popped-up knob. Turn the con-
trol knob counterclockwise to emphasize frontspeaker sound. (Rear speaker sound will beattenuated) When the control knob is turnedclockwise, rear speaker sound will be empha-sized. (Front speaker sound will be attenuated)
4.4.
4.4.
4.
TUNE (Manual) Select Button
TUNE (Manual) Select Button TUNE (Manual) Select Button
TUNE (Manual) Select Button
TUNE (Manual) Select Button
Press the ( ) side or ( ) side to increase or to
decrease the frequency. With the button helddown for 0.5 sec. or more, the stop signal(broadcasting radio wave) is ignored and chan-nel selection continues.
SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel
Selection)
Selection) Selection)
Selection)
Selection)
Press the TUNE select button for 1 sec or
more, and releasing will automatically tune thenext available station with beep sound. When the ( ) side is pressed longer than 1
second and releasing will automatically tunethe next higher frequency and when the ( )side is pressed longer than 1 second and re-leasing will automatically tune the next lowerfrequency. 5.5.
5.5.
5. PRESET STATION Select Buttons
PRESET STATION Select Buttons PRESET STATION Select Buttons
PRESET STATION Select Buttons
PRESET STATION Select Buttons
Six (6) stations for AM, FM and FM2 respec-
tively can be preset in the electronic memorycircuit.
HOW TO PRESET STATIONS
HOW TO PRESET STATIONS HOW TO PRESET STATIONS
HOW TO PRESET STATIONS
HOW TO PRESET STATIONS
Six AM and twelve FM stations may be pro-
grammed into the memory of the radio. Then,by simply pressing the band select button and/or one of the six station select buttons, you mayrecall any of these stations instantly. To pro-gram the stations, follow these steps:
o Press band selector to set the band for AM, FM and FM2.
o Select the desired station to be stored by seek or manual tuning.
o Determine the preset station select button you wish to use to access that station.
o Press the station select button for more than two seconds. A select button indicator will show in the display indicating which selectbutton you have depressed. The frequencydisplay will flash after it has been stored intothe memory with beep sound. You shouldthen release the button, and proceed toprogram the next desired station. A total of18 stations can be programmed by selectingone AM and two FM station per button.
o When completed, any preset station may be recalled by selecting AM, FM or FM2 bandand the appropriate station button.