2003 Hyundai Elantra remove seats

FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 7
B080B01A-AATAdjusting Seat Forward and Rearward Adjusting Seat Forward and RearwardAdjusting Seat Forward and Rearward Adjusting Seat Forward and Rearward
Adjusting Seat Forward and Rearward
To move the seat toward the front or rear, pull
the lock release lever upward. This will release
the seat on its track so you can move it forward
or rearward to the desired position. When you
find the position you want, release the lever
and slide the seat forward or rearward on its
B080A01A-AAT
ADJUSTABLE FRONT SEATS ADJUSTABLE FRONT SEATSADJUSTABLE FRONT SEATS ADJUSTABLE FRONT SEATS
ADJUSTABLE FRONT SEATS
WARNING: WARNING:WARNING: WARNING:
WARNING:
Never attempt to adjust the seat while the Never attempt to adjust the seat while theNever attempt to adjust the seat while the Never attempt to adjust the seat while the
Never attempt to adjust the seat while the
vehicle is moving. This could result in loss vehicle is moving. This could result in lossvehicle is moving. This could result in loss vehicle is moving. This could result in loss
vehicle is moving. This could result in loss
of control, or an accident which may cause of control, or an accident which may causeof control, or an accident which may cause of control, or an accident which may cause
of control, or an accident which may cause
death, serious injury, or property damage. death, serious injury, or property damage.death, serious injury, or property damage. death, serious injury, or property damage.
death, serious injury, or property damage.
In order to prevent operation of the passenger
front and rear windows, a window lock switch is
provided on the armrest of the driver's door. To
disable the power windows, press the window
lock switch.
To revert to normal operation, press the win-
dow lock switch a second time.
Auto-Down Window (Driver's Side)
The Auto-Down window is moved to its fully
open position by pushing the switch. To stop at
the desired position push the switch again.
WARNING:1) Be careful that someone's head, hands
and body are not trapped by a closing
window.
2) Never try to operate the main switch on
the driver's door and the individual door
window switch in opposing directions at
the same time. If this is done, the window
will stop and cannot be opened or closed.3) Do not leave children alone in the car.
Always remove the ignition key for their
safety.B080B01E
B080C01A-AAT
Adjusting Seatback Angle Adjusting Seatback AngleAdjusting Seatback Angle Adjusting Seatback Angle
Adjusting Seatback Angle
To recline the seatback, lean forward to take
your weight off it, then pull up on the recliner
control lever at the outside edge of the seat.
Now lean back until the desired seatback angle
is achieved. To lock the seatback into position,
release the recliner control lever.
WARNING: WARNING:WARNING: WARNING:
WARNING:To minimize risk of severe injury in the To minimize risk of severe injury in theTo minimize risk of severe injury in the To minimize risk of severe injury in the
To minimize risk of severe injury in the
event of a collision or a sudden stop, both event of a collision or a sudden stop, bothevent of a collision or a sudden stop, both event of a collision or a sudden stop, both
event of a collision or a sudden stop, both
the driver and passenger seatbacks should the driver and passenger seatbacks shouldthe driver and passenger seatbacks should the driver and passenger seatbacks should
the driver and passenger seatbacks should
always be in an upright position while the always be in an upright position while thealways be in an upright position while the always be in an upright position while the
always be in an upright position while the
vehicle is in motion. The protection provid- vehicle is in motion. The protection provid-vehicle is in motion. The protection provid- vehicle is in motion. The protection provid-
vehicle is in motion. The protection provid-
ed by the seat belts and airbags in a frontal ed by the seat belts and airbags in a frontaled by the seat belts and airbags in a frontal ed by the seat belts and airbags in a frontal
ed by the seat belts and airbags in a frontal
collision may be reduced significantly collision may be reduced significantlycollision may be reduced significantly collision may be reduced significantly
collision may be reduced significantly
when the seatbacks are reclined. There is when the seatbacks are reclined. There iswhen the seatbacks are reclined. There is when the seatbacks are reclined. There is
when the seatbacks are reclined. There is track until it locks into the desired position and
cannot be moved further.
B080C01E
B060B01E

FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 18the child restraint system is securely installed.
If you need to tighten the belt, pull more web-
bing toward the retractor. When you unbuckle
the seat belt and allow it to retract, the retractor
will automatically revert back to its normal
seated passenger Emergency Locking usage
condition.
NOTE:o Before installing the child restraint sys-
tem in any seating position, read the
instructions supplied by the child re-
straint system manufacturer.
o If the seat belt does not operate as de-
scribed, have the system checked imme-
diately by your authorized Hyundai deal-
er.
WARNING:o If the retractor is not in the Automatic
Locking mode, the child restraint system
can move when your vehicle turns or
stops abruptly.
o Do not install any child restraint system
in the front passenger seat. Should an
accident occur and cause the passenger
side airbag to deploy, it could severely
injure or kill an infant or child seated in
an infant or child seat. Therefore, only
use a child restraint system in the rear
seat of your vehicle.
B230E01E-GATInstalling a Child Restraint Seat with the
"Tether Anchorage" System (5 DOOR)
B230E01E
Covering shelf
Back panel
Front of Vehicle
Tether strap hook
Blanking covers
Three child restraint hook holders are located
on the vertical back panel.
To install a child restraint seat, remove the
blanking covers on the covering shelf.
Connect the child restraint tether strap hook to
the child restraint hook holder through the hole
on the covering shelf.
To install a child restraint system in the rear
seats, extend the shoulder/lap belt entirely
from its retractor until a "click" is felt. This will
engage the seat belt retractor automatic lock-
ing feature, which allows the seat belt to retract
but not extend. Install the child restraint sys-
tem, buckle the seat belt and allow the seat belt
to take up any slack. Make sure that the lap
portion of the belt is tight around the child
restraint system and the shoulder portion of the
belt is positioned so that it can not interfere with
the child's head or neck. Also, double check to
be sure that the retractor has engaged the
Automatic Locking feature by trying to extend
webbing out of the retractor. If the retractor is in
the Automatic Locking mode, the belt will be
locked. After installation of the child restraint
system, try to move it in all directions to be sure
B230G03Y-AATInstallation on Rear Seats
YR10400B
On rear seats