2003 Hyundai Elantra parking brake

[x] Cancel search: parking brake

remote start airbag radio controls fuel fill door release homelink battery

Page 37 of 172

Hyundai Elantra 2003 Owners Manual FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 28
B260A01E
24 6578 13
B260A02E-AATINSTRUMENT CLUSTER AND INDICATOR (WITH

Page 38 of 172

Page 39 of 172

FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 30
B260D01A-AAT
Turn Signal Indicator Lights Turn Signal Indicator LightsTurn Signal Indicator Lights Turn Signal Indicator Lights
Turn Signal Indicator Lights
The blinking green arrows on the instrument
panel show the direction indicated by the turn
signals. If the arrow comes on but does not
blink, blinks more rapidly than normal, or does
not illuminate at all, a malfunction in the turn
signal system is indicated. Your dealer should
be consulted for repairs.
B260E01L-AAT
Seat Belt Reminder Light Seat Belt Reminder LightSeat Belt Reminder Light Seat Belt Reminder Light
Seat Belt Reminder Light
And Chime And ChimeAnd Chime And Chime
And Chime
The seat belt reminder light comes and stays
on until the seat belt is fastened when the
ignition key is turned from the "OFF" position to
"ON" or "START". And, the warning chime will
also sound for about 6 seconds.
B260F01A-AATHigh Beam Indicator High Beam IndicatorHigh Beam Indicator High Beam Indicator
High Beam Indicator
Light LightLight Light
Light
The high beam indicator light comes on when-
ever the headlights are switched to high beam
of flash position.
B260G01A-AAT
Low Oil Pressure Warning Light Low Oil Pressure Warning LightLow Oil Pressure Warning Light Low Oil Pressure Warning Light
Low Oil Pressure Warning Light
CAUTION: CAUTION:CAUTION: CAUTION:
CAUTION:
If the oil pressure warning light stays on If the oil pressure warning light stays onIf the oil pressure warning light stays on If the oil pressure warning light stays on
If the oil pressure warning light stays on
while the engine is running, serious engine while the engine is running, serious enginewhile the engine is running, serious engine while the engine is running, serious engine
while the engine is running, serious engine
damage may result. The oil pressure warn- damage may result. The oil pressure warn-damage may result. The oil pressure warn- damage may result. The oil pressure warn-
damage may result. The oil pressure warn-
ing light comes on whenever there is insuf- ing light comes on whenever there is insuf-ing light comes on whenever there is insuf- ing light comes on whenever there is insuf-
ing light comes on whenever there is insuf-
ficient oil pressure. In normal operation, it ficient oil pressure. In normal operation, itficient oil pressure. In normal operation, it ficient oil pressure. In normal operation, it
ficient oil pressure. In normal operation, it
should come on when the ignition switch is should come on when the ignition switch isshould come on when the ignition switch is should come on when the ignition switch is
should come on when the ignition switch is
turned on, then go out when the engine is turned on, then go out when the engine isturned on, then go out when the engine is turned on, then go out when the engine is
turned on, then go out when the engine is
started. If the oil pressure warning light started. If the oil pressure warning lightstarted. If the oil pressure warning light started. If the oil pressure warning light
started. If the oil pressure warning light
stays on while the engine is running, there stays on while the engine is running, therestays on while the engine is running, there stays on while the engine is running, there
stays on while the engine is running, there
may be a serious malfunction. may be a serious malfunction.may be a serious malfunction. may be a serious malfunction.
may be a serious malfunction.
If this happens, stop the car as soon as it is If this happens, stop the car as soon as it isIf this happens, stop the car as soon as it is If this happens, stop the car as soon as it is
If this happens, stop the car as soon as it is
safe to do so, turn off the engine and check safe to do so, turn off the engine and checksafe to do so, turn off the engine and check safe to do so, turn off the engine and check
safe to do so, turn off the engine and check
the oil level. If the oil level is low, fill the the oil level. If the oil level is low, fill thethe oil level. If the oil level is low, fill the the oil level. If the oil level is low, fill the
the oil level. If the oil level is low, fill the
engine oil to the proper level and start the engine oil to the proper level and start theengine oil to the proper level and start the engine oil to the proper level and start the
engine oil to the proper level and start the
engine again. If the light stays on with the engine again. If the light stays on with theengine again. If the light stays on with the engine again. If the light stays on with the
engine again. If the light stays on with the
engine running, turn the engine off immedi- engine running, turn the engine off immedi-engine running, turn the engine off immedi- engine running, turn the engine off immedi-
engine running, turn the engine off immedi-
ately. In any instance where the oil light ately. In any instance where the oil lightately. In any instance where the oil light ately. In any instance where the oil light
ately. In any instance where the oil light
stays on when the engine is running, the stays on when the engine is running, thestays on when the engine is running, the stays on when the engine is running, the
stays on when the engine is running, the
engine should be checked by a Hyundai engine should be checked by a Hyundaiengine should be checked by a Hyundai engine should be checked by a Hyundai
engine should be checked by a Hyundai
dealer before the car is driven again. dealer before the car is driven again.dealer before the car is driven again. dealer before the car is driven again.
dealer before the car is driven again.
B260B01A-AAT
SRS (Airbag) Service SRS (Airbag) ServiceSRS (Airbag) Service SRS (Airbag) Service
SRS (Airbag) Service
Reminder Indicator (SRI) Reminder Indicator (SRI)Reminder Indicator (SRI) Reminder Indicator (SRI)
Reminder Indicator (SRI)
The SRS service reminder indicator (SRI)
comes on and flashes for about 6 seconds
after the ignition key is turned to the "ON"
position or after the engine is started, after
which it will go out.
This light also comes on when the SRS is not
working properly. If the SRI does not come on,
or continuously remains on after flashing for
about 6 seconds when you turned the ignition
key to the "ON" position or started the engine,
or if it comes on while driving, have the SRS
inspected by an authorized Hyundai Dealer.
B260P02Y-GATABS Service Reminder
Indicator (SRI) (If Installed)
When the key is turned to the "ON" position, the
Anti-Lock Brake System will come on and then
go off in a few seconds. If the ABS SRI remains
on, comes on while driving, or does not come
on when the key is turned to the "ON" position,
this indicates that there may be a problem with
the ABS.
If this occurs, have your vehicle checked by
your Hyundai dealer as soon as possible. The
normal braking system will still be operational,
but without the assistance of the anti-lock
brake system.
WARNING:If the both ABS SRI and Parking Brake/
Brake fluid level warning lights remain "ON"
or come on while driving, there may be a
problem with E.B.D (Electronic Brake Force
Distribution).
If this occurs, avoid sudden stops and have
your vehicle checked by your Hyundai dealer
as soon as possible.

Page 40 of 172

FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 31
B260H03A-AAT
Parking Brake/ Parking Brake/Parking Brake/ Parking Brake/
Parking Brake/
Low Brake Fluid Level Low Brake Fluid LevelLow Brake Fluid Level Low Brake Fluid Level
Low Brake Fluid Level
Level Warning Light Level Warning LightLevel Warning Light Level Warning Light
Level Warning Light
WARNING: WARNING:WARNING: WARNING:
WARNING:
If you suspect brake trouble, have your If you suspect brake trouble, have yourIf you suspect brake trouble, have your If you suspect brake trouble, have your
If you suspect brake trouble, have your
brakes checked by a Hyundai dealer as brakes checked by a Hyundai dealer asbrakes checked by a Hyundai dealer as brakes checked by a Hyundai dealer as
brakes checked by a Hyundai dealer as
soon as possible. Driving your car with a soon as possible. Driving your car with asoon as possible. Driving your car with a soon as possible. Driving your car with a
soon as possible. Driving your car with a
problem in either the brake electrical sys- problem in either the brake electrical sys-problem in either the brake electrical sys- problem in either the brake electrical sys-
problem in either the brake electrical sys-
tem or brake hydraulic system is danger- tem or brake hydraulic system is danger-tem or brake hydraulic system is danger- tem or brake hydraulic system is danger-
tem or brake hydraulic system is danger-
ous, and could result in a serious injury or ous, and could result in a serious injury orous, and could result in a serious injury or ous, and could result in a serious injury or
ous, and could result in a serious injury or
death. death.death. death.
death.
Warning Light Operation Warning Light OperationWarning Light Operation Warning Light Operation
Warning Light OperationThe parking brake/brake fluid level warning
light should come on when the parking brake is
applied and the ignition switch is turned to "ON"
or "START". After the engine is started, the light
should go out when the parking brake is re-
leased.
If the parking brake is not applied, the warning
light should come on when the ignition switch is
turned to "ON" or "START", then go out when
the engine starts. If the light comes on at any
other time, you should slow the vehicle and
bring it to a complete stop in a safe location off
the roadway.
The brake fluid level warning light indicates that
the brake fluid level in the brake master cylinder
is low and hydraulic brake fluid conforming to
DOT 3 or DOT 4 specifications should be
added. After adding fluid, if no other trouble isfound, the car should be immediately and care-
fully driven to a Hyundai dealer for inspection.
If further trouble is experienced, the vehicle
should not be driven at all but taken to a dealer
by a professional towing service or some other
safe method.
Your Hyundai is equipped with dual-diagonal
braking systems. This means you still have
braking on two wheels even if one of the dual
systems should fail. With only one of the dual
systems working, more than normal pedal travel
and greater pedal pressure are required to stop
the car. Also, the car will not stop in as short a
distance with only half of the brake system
working. If the brakes fail while you are driving,
shift to a lower gear for additional engine brak-
ing and stop the car as soon as it is safe to do
so.
B260J01A-AATCharging System Warning Charging System WarningCharging System Warning Charging System Warning
Charging System Warning
Light LightLight Light
Light
The charging system warning light should come
on when the ignition is turned on, then go out
when the engine is running. If the light stays on
while the engine is running, there is a malfunc-
tion in the electrical charging system. If the light
comes on while you are driving, stop, turn off
the engine and check under the hood. First,
make certain the generator drive belt is in
place. If it is, check the tension of the belt.
Do this as shown on page 6-13 by pushing
down on the center of the belt. And then, have
the system checked by your Hyundai dealer.
B260M01A-AATLow Fuel Level Warning Light Low Fuel Level Warning LightLow Fuel Level Warning Light Low Fuel Level Warning Light
Low Fuel Level Warning Light
The low fuel level warning light comes on when
the fuel tank is approaching empty. When it
comes on, you should add fuel as soon as
possible. Driving with the fuel level warning
light on or with the fuel level below "E" can
cause the engine to misfire and damage the
catalytic converter.
B260L01Y-AATDoor Ajar Warning Light
and Chime
The door ajar warning light warns you that a
door is not completely closed and the chime
warns you that driver's side front door is not
completely closed.
NOTE:To remind you not to lock the key inside the
car, the warning light comes on whenever
the key is in the "LOCK" position and a door
is open. The warning chime only sounds
whenever the key is in the "LOCK" position
and the driver's side front door is open. The
chime sounds and the light remains on until
the key is removed from the ignition.
B260K01E-GATTrunk Lid (4 door)/Tail Gate
(5 door) Open Warning Light
This light remains on unless the trunk lid/tail
gate is completely closed.

Page 50 of 172

Page 56 of 172

Page 103 of 172

Hyundai Elantra 2003 Owners Manual DRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAIDRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAI
DRIVING YOUR HYUNDAI
2- 2
C020A01A-AAT
BEFORE STARTING THE ENGINE BEFORE STARTING THE ENGINEBEFORE STARTING THE ENGIN

DRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAIDRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAI
DRIVING YOUR HYUNDAI
2- 2
C020A01A-AAT
BEFORE STARTING THE ENGINE BEFORE STARTING THE ENGINEBEFORE STARTING THE ENGINE BEFORE STARTING THE ENGINE
BEFORE STARTING THE ENGINEBefore you start the engine, you should always:
1. Look around the vehicle to be sure there are
no flat tires, puddles of oil, water or other
indications of possible trouble.
2. After entering the car, check to be sure the
parking brake is engaged.
3. Check that all windows, and lights are clean.
4. Check that the interior and exterior mirrors
are clean and in position.
5. Check your seat, seatback and headrest to
be sure they are in their proper positions.
6. Lock all the doors.
7. Fasten your seat belt and be sure that all
other occupants have fastened theirs.
8. Turn off all lights and accessories that are not
needed.
9. When you turn the ignition switch to "ON",
check that all appropriate warning lights are
operating and that you have sufficient fuel.
10. Check the operation of warning lights and all
bulbs when key is in the "ON" position.o To start the engine, insert the ignition key and
turn it to the "START" position. Release it as
soon as the engine starts. Do not hold the key
in the "START" position for more than 15
seconds.
NOTE: NOTE:NOTE: NOTE:
NOTE:o oo o
o
For safety, the engine will not start if the For safety, the engine will not start if theFor safety, the engine will not start if the For safety, the engine will not start if the
For safety, the engine will not start if the
clutch pedal is not depressed fully (Manual clutch pedal is not depressed fully (Manualclutch pedal is not depressed fully (Manual clutch pedal is not depressed fully (Manual
clutch pedal is not depressed fully (Manual
Transaxle) or the shift lever is not in "P" or Transaxle) or the shift lever is not in "P" orTransaxle) or the shift lever is not in "P" or Transaxle) or the shift lever is not in "P" or
Transaxle) or the shift lever is not in "P" or
"N" Position (Automatic Transaxle). "N" Position (Automatic Transaxle)."N" Position (Automatic Transaxle). "N" Position (Automatic Transaxle).
"N" Position (Automatic Transaxle).
o oo o
o
The ignition key cannot be turned from The ignition key cannot be turned fromThe ignition key cannot be turned from The ignition key cannot be turned from
The ignition key cannot be turned from
"ACC" position to "LOCK" position un- "ACC" position to "LOCK" position un-"ACC" position to "LOCK" position un- "ACC" position to "LOCK" position un-
"ACC" position to "LOCK" position un-
less the shift lever is in the "P" (Park) less the shift lever is in the "P" (Park)less the shift lever is in the "P" (Park) less the shift lever is in the "P" (Park)
less the shift lever is in the "P" (Park)
position or the negative battery terminal is position or the negative battery terminal isposition or the negative battery terminal is position or the negative battery terminal is
position or the negative battery terminal is
disconnected from the battery. To remove disconnected from the battery. To removedisconnected from the battery. To remove disconnected from the battery. To remove
disconnected from the battery. To remove
the key, always confirm that the shift lever the key, always confirm that the shift leverthe key, always confirm that the shift lever the key, always confirm that the shift lever
the key, always confirm that the shift lever
is securely positioned in "P" (Park) (For is securely positioned in "P" (Park) (Foris securely positioned in "P" (Park) (For is securely positioned in "P" (Park) (For
is securely positioned in "P" (Park) (For
Automatic Transaxle) Automatic Transaxle)Automatic Transaxle) Automatic Transaxle)
Automatic Transaxle)
o oo o
o
For additional information about starting, For additional information about starting,For additional information about starting, For additional information about starting,
For additional information about starting,
see page 2-3. see page 2-3.see page 2-3. see page 2-3.
see page 2-3.
C040A01A-AAT
KEY POSITIONS KEY POSITIONSKEY POSITIONS KEY POSITIONS
KEY POSITIONS
WARNING: WARNING:WARNING: WARNING:
WARNING:
The engine should not be turned off or the The engine should not be turned off or theThe engine should not be turned off or the The engine should not be turned off or the
The engine should not be turned off or the
key removed from the ignition key cylinder key removed from the ignition key cylinderkey removed from the ignition key cylinder key removed from the ignition key cylinder
key removed from the ignition key cylinder
while the vehicle is in motion. The steering while the vehicle is in motion. The steeringwhile the vehicle is in motion. The steering while the vehicle is in motion. The steering
while the vehicle is in motion. The steering
wheel is locked by removing the key. wheel is locked by removing the key.wheel is locked by removing the key. wheel is locked by removing the key.
wheel is locked by removing the key.C030A01A-AAT
COMBINATION IGNITION SWITCH COMBINATION IGNITION SWITCHCOMBINATION IGNITION SWITCH COMBINATION IGNITION SWITCH
COMBINATION IGNITION SWITCH
To Start the Engine To Start the EngineTo Start the Engine To Start the Engine
To Start the Engine
o If your Hyundai is equipped with a manual
transaxle, place the shift lever in neutral and
depress the clutch pedal fully.
o If your Hyundai has an automatic transaxle,
place the shift lever in "P" (park).
C040A01E-1
LOCK LOCKLOCK LOCK
LOCKACC ACCACC ACC
ACC
ON ONON ON
ON
START STARTSTART START
START
o oo o
o
"START" "START""START" "START"
"START"The engine is started in this position. It will crank
until you release the key.
NOTE: NOTE:NOTE: NOTE:
NOTE:Do not hold the key in the "START" position Do not hold the key in the "START" positionDo not hold the key in the "START" position Do not hold the key in the "START" position
Do not hold the key in the "START" position
for more than 15 seconds. for more than 15 seconds.for more than 15 seconds. for more than 15 seconds.
for more than 15 seconds.
o oo o
o
"ON" "ON""ON" "ON"
"ON"When the key is in the "ON" position, the ignition
is on and all accessories may be turned on. If the
engine is not running, the key should not be left
in the "ON" position. This will discharge the
battery and may also damage the ignition sys-
tem.
o oo o
o
"ACC" "ACC""ACC" "ACC"
"ACC"With the key in the "ACC" position, some electri-
cal accessories (radio, etc.) may be operated.

Page 105 of 172

DRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAIDRIVING YOUR HYUNDAI DRIVING YOUR HYUNDAI
DRIVING YOUR HYUNDAI
2- 4
C070D03A-AATGood Driving Practices Good Driving PracticesGood Driving Practices Good Driving Practices
Good Driving Practiceso Never take the car out of gear and coast down
a hill. This is extremely hazardous. Always
leave the car in gear.
o Don't "ride" the brakes. This can cause them
to overheat and malfunction. Instead, when
you are driving down a long hill, slow down
and shift to a lower gear. When you do this,
engine braking will help slow the car.
o Slow down before shifting to a lower gear.
This will help avoid over-revving the engine,
which can cause damage.
o Slow down when you encounter cross winds.
This gives you much better control of your car.C070B01A-AAT
Using the Clutch Using the ClutchUsing the Clutch Using the Clutch
Using the ClutchThe clutch should be pressed all the way to the
floor before shifting, then released slowly. The
clutch pedal should always be used after fully
returning to the original position. Do not rest your
foot on the clutch pedal while driving. This can
cause unnecessary wear.
Do not partially engage the clutch to hold the car
on an incline. This causes unnecessary wear.
Use the parking brake to hold the car on an
incline. Do not operate the clutch pedal rapidly
and repeatedly.
C070A02A-AATOPERATING THE MANUAL OPERATING THE MANUALOPERATING THE MANUAL OPERATING THE MANUAL
OPERATING THE MANUAL
TRANSAXLE TRANSAXLETRANSAXLE TRANSAXLE
TRANSAXLE
Your Hyundai's manual transaxle has a conven-
tional shift pattern. This shift pattern is imprinted
on the shift knob. The transaxle is fully synchro-
nized in all forward gears so shifting to either a
higher or a lower gear is easily accomplished.
NOTE: NOTE:NOTE: NOTE:
NOTE:o oo o
o
To shift into reverse, rest the lever in To shift into reverse, rest the lever inTo shift into reverse, rest the lever in To shift into reverse, rest the lever in
To shift into reverse, rest the lever in
neutral for at least 3 seconds after your neutral for at least 3 seconds after yourneutral for at least 3 seconds after your neutral for at least 3 seconds after your
neutral for at least 3 seconds after your
car is completely stopped. Then move the car is completely stopped. Then move thecar is completely stopped. Then move the car is completely stopped. Then move the
car is completely stopped. Then move the
lever into the reverse position. lever into the reverse position.lever into the reverse position. lever into the reverse position.
lever into the reverse position.
o oo o
o
During cold weather, shifting may be dif- During cold weather, shifting may be dif-During cold weather, shifting may be dif- During cold weather, shifting may be dif-
During cold weather, shifting may be dif-
ficult until the transaxle lubricant has ficult until the transaxle lubricant hasficult until the transaxle lubricant has ficult until the transaxle lubricant has
ficult until the transaxle lubricant has
warmed up. This is normal and not harm- warmed up. This is normal and not harm-warmed up. This is normal and not harm- warmed up. This is normal and not harm-
warmed up. This is normal and not harm-
ful to the transaxle. ful to the transaxle.ful to the transaxle. ful to the transaxle.
ful to the transaxle.
SSA2090AThe shift points as shown above are recom-
mended for optimum fuel economy and perform-
ance.
C070E03A-AAT
Recommended Shift Points Recommended Shift PointsRecommended Shift Points Recommended Shift Points
Recommended Shift Points
Shift
from-to
1-2
2-3
3-4
4-5Recommended
mph (km/h)
15 (20)
25 (40)
35 (55)
45 (75) o oo o
o
If you 've come to a complete stop and it's If you 've come to a complete stop and it'sIf you 've come to a complete stop and it's If you 've come to a complete stop and it's
If you 've come to a complete stop and it's
hard to shift into 1 hard to shift into 1hard to shift into 1 hard to shift into 1
hard to shift into 1
st stst st
st or R(Reverse), put the or R(Reverse), put the or R(Reverse), put the or R(Reverse), put the
or R(Reverse), put the
shift lever in N(Neutral) position and re- shift lever in N(Neutral) position and re-shift lever in N(Neutral) position and re- shift lever in N(Neutral) position and re-
shift lever in N(Neutral) position and re-
lease the clutch. Press the clutch pedal lease the clutch. Press the clutch pedallease the clutch. Press the clutch pedal lease the clutch. Press the clutch pedal
lease the clutch. Press the clutch pedal
back down, and then shift into 1 back down, and then shift into 1back down, and then shift into 1 back down, and then shift into 1
back down, and then shift into 1
st stst st
st or or or or
or
R(Reverse) gear position. R(Reverse) gear position.R(Reverse) gear position. R(Reverse) gear position.
R(Reverse) gear position.
o oo o
o
Do not use the shift lever as a handrest Do not use the shift lever as a handrestDo not use the shift lever as a handrest Do not use the shift lever as a handrest
Do not use the shift lever as a handrest
during driving, as this can result in prema- during driving, as this can result in prema-during driving, as this can result in prema- during driving, as this can result in prema-
during driving, as this can result in prema-
ture wear of the transaxle shift forks. ture wear of the transaxle shift forks.ture wear of the transaxle shift forks. ture wear of the transaxle shift forks.
ture wear of the transaxle shift forks.
CAUTION: CAUTION:CAUTION: CAUTION:
CAUTION:When downshifting from fifth gear to fourth When downshifting from fifth gear to fourthWhen downshifting from fifth gear to fourth When downshifting from fifth gear to fourth
When downshifting from fifth gear to fourth
gear, caution should be taken not to inadvert- gear, caution should be taken not to inadvert-gear, caution should be taken not to inadvert- gear, caution should be taken not to inadvert-
gear, caution should be taken not to inadvert-
ently press the gear shift lever sideways in ently press the gear shift lever sideways inently press the gear shift lever sideways in ently press the gear shift lever sideways in
ently press the gear shift lever sideways in
such a manner that second gear is engaged. such a manner that second gear is engaged.such a manner that second gear is engaged. such a manner that second gear is engaged.
such a manner that second gear is engaged.
Such a drastic downshift may cause the en- Such a drastic downshift may cause the en-Such a drastic downshift may cause the en- Such a drastic downshift may cause the en-
Such a drastic downshift may cause the en-
gine speed to increase to the point that the gine speed to increase to the point that thegine speed to increase to the point that the gine speed to increase to the point that the
gine speed to increase to the point that the
tachometer will enter the red zone. Such tachometer will enter the red zone. Suchtachometer will enter the red zone. Such tachometer will enter the red zone. Such
tachometer will enter the red zone. Such
over-revving of the engine may possibly over-revving of the engine may possiblyover-revving of the engine may possibly over-revving of the engine may possibly
over-revving of the engine may possibly
cause engine damage. cause engine damage.cause engine damage. cause engine damage.
cause engine damage.

Load next 8 pages

Page: 1-8 9-16 17-24 25-32 32 next >

handbrake adding oil wiring diagram inflation pressure dashboard warning lights high beam