2003 Hyundai Elantra dashboard

FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 55
through the heating system and heated or cooled
according to the function selected.
NOTE: NOTE:NOTE: NOTE:
NOTE:o It should be noted that prolonged opera-
tion of the heating in "Recirculation"
mode will give rise to fogging of the
windshield and side windows and the air
within the passenger compartment will
become stale. In addition, prolonged use
of the air conditioning with the "Recircu-
lation" mode selected may result in the
air within the passenger compartment
becoming excessively dry.
o When the ignition switch is turned "ON",
the air intake control will change to " "
mode (regardless of switch position).
This is normal operation.
B670D02A-AAT
Air Flow Control Air Flow ControlAir Flow Control Air Flow Control
Air Flow Control
B670D01E
This is used to direct the flow of air. Air can be
directed to the floor, dashboard outlets, or
windshield. Five symbols are used to represent
Face, Bi-Level, Floor, Floor-Defrost and De-
frost air position.
Face-Level Face-LevelFace-Level Face-Level
Face-LevelSelecting the "Face" mode will cause air to be
discharged through the face level vents.
Bi-Level Bi-LevelBi-Level Bi-Level
Bi-LevelAir is discharged through the face vents and the
floor vents. This makes it possible to have
cooler air from the dashboard vents and warmer
air from the floor outlets at the same time.
Floor-Level Floor-LevelFloor-Level Floor-Level
Floor-LevelAir is discharged through the floor vents.
Floor-Defrost Level Floor-Defrost LevelFloor-Defrost Level Floor-Defrost Level
Floor-Defrost LevelAir is discharged through the windshield de-
frost vents and the floor vents.
If the "Floor-Defrost" mode is selected, the A/C
will turn on automatically and "Fresh" mode will
be activated.
Defrost-Level Defrost-LevelDefrost-Level Defrost-Level
Defrost-LevelAir is discharged through the windshield turn
frost vents.
If the "Defrost" mode is selected, the A/C will
turn on automatically and "Fresh" mode will be
activated.
B670C01E-AAT
Air Intake Control Air Intake ControlAir Intake Control Air Intake Control
Air Intake Control
B670C01E
This is used to select fresh outside air or
recirculating inside air.
To change the air intake control mode, (Fresh
mode, Recirculation mode) push the control
button.
FRESH MODE ( ) : The indicator light on
the button goes off when the air intake control
is in fresh mode.
RECIRCULATION MODE ( ): The indicator
light on the button is illuminated when the air
intake control is in recirculation mode.
With the "Fresh" mode selected, air enters the
vehicle from the outside and is heated or cooled
according to the function selected.
With the "Recirculation" mode selected, air from
within the passenger compartment will be drawn

FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 56
B710A01S-AAT
VENTILATION VENTILATIONVENTILATION VENTILATION
VENTILATIONTo operate the ventilation system:
o Set the air intake control to "Fresh" mode
( ).
o To direct all intake air to the dashboard
vents, set the airflow control to "Face".
o Adjust the fan speed control to the desired
speed.
o Set the temperature control between "Cool"
and "Warm".
B700A01S-AAT
BI-LEVEL HEATING BI-LEVEL HEATINGBI-LEVEL HEATING BI-LEVEL HEATING
BI-LEVEL HEATINGYour Hyundai is equipped with bi-level heating
controls. This makes it possible to have cooler
air from the dashboard vents and warmer air
from the floor outlets at the same time. To use
this feature:
o Set the air intake control to "Fresh" mode
( ).
o Set the air flow control at the "Bi-Level"
position.
o Adjust the fan speed control to the desired
speed.
o Set the temperature control between "Cool"
and "Warm".
The center ventilators are located in the middle
of the dashboard. The direction of air flow from
the vents in the center of the dashboard is
adjustable.
To control the direction of the air flow, move the
knob in the center of the vent up-and-down and
side-to-side.
B710B01S-AATCENTER VENTILATOR
B710B01E-1
B690A01S-AAT
HEATING CONTROLS HEATING CONTROLSHEATING CONTROLS HEATING CONTROLS
HEATING CONTROLSFor normal heating operation, set the air intake
control to the "Fresh" position and the air flow
control to "Floor".
For faster heating, the air intake control should
be in the "Recirculation" position.
If the windows fog up, move the air flow control
to the "Def" (defroster) position. (The A/C will
turn on automatically and "Fresh" mode will be
activated.)
For maximum heat, move the temperature con-
trol to "Warm".
This control is used to adjust the degree of
heating or cooling desired.
B670E01E
B670E02A-AATTemperature Control
NOTE:If the "Floor-Defrost" or "Defrost" mode is
selected, the air conditioning will not turn
off by pushing the A/C button.
CoolWarm

FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 58The air conditioning is turned on or off by
pushing the A/C button on the heating/air con-
ditioning control panel.
B730A01FC-GATOperation Tipso To keep dust or unpleasant fumes from
entering the car through the ventilation sys-
tem, temporarily set the air intake control to
"Recirculation". Be sure to return the control
to "Fresh" when the irritation has passed to
keep fresh air in the vehicle. This will help
keep the driver alert and comfortable.
o Air for the heating/cooling system is drawn
in through the grilles just ahead of the wind-
shield. Care should be taken that these are
not blocked by leaves, snow, ice or other
obstructions.
o To prevent interior fog on the windshield, set
the air intake control to the fresh air ( )
position and fan speed to the desired posi-
tion.
B740A01S-AATAIR CONDITIONING SYSTEM
Air Conditioning Switch
B740A01E
B710C01S-AATSIDE VENTILATOR
B710C01E-1
The side ventilators are located on each side
of dashboard. To change the direction of the
air flow, move the knob in the center of the vent
up-and-down and side-to-side. The side vent
knobs control the amount of outside air entering
the vehicle through the side vents. The vents
are opened when the vent knob is moved to the
up position. The vents are closed when the vent
knob is moved to the down position. Keep these
vents clear of leaves and other debris.

FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 63 This is used to direct the flow of air. Air can be
directed to the floor, dashboard outlets, or
windshield. Four symbols are used to repre-
sent Face, Bi-Level, Floor and Floor-Defrost air
position. Exhaust gas cutoff mode :
Air enters the vehicle from the outside.
But if exhaust gas enters the vehicle from the
outside, the exhaust gas cutoff mode ( ) is
automatically converted to the ( ) mode, to
prevent exhaust gas from entering the vehicle.
NOTE:o It should be noted that prolonged opera-
tion of the heating system in recircula-
tion mode ( ) will give rise to misting
of the winds-hield and side windows and
the air within the passenger compart-
ment will become stale. In addition, pro-
longed use of the air conditioning with
the recirculation mode ( ) selected
may result in the air within the passenger
compartment becoming excessively dry.
o When the ignition switch is turned "ON",
the air intake control will change to ( )
mode (regardless of switch position). This
is normal operation. The air intake control
operates in "AUTO" mode when turning
the ignition to the "ON" position if the
"AUTO" mode was used before shutting
off the engine.
B980D01Y-AATHeating and Cooling System Off
Press the "OFF" button to stop the operation of
the heating and cooling system.
B980E01E-AATAir Flow Control
B980E01E
This is used to select fresh outside air or
recirculate inside air automatically.
: OFF
:ON
Fresh mode :
Air enters the vehicle from the outside and is
heated or cooled according to the function
selected.
Recirculation mode :
Air from within the passenger compartment will
be drawn through the heating system and heated
or cooled according to the function selected.
B980C02E-GATAir Intake Control Switch (With A.Q.S)
(If Installed)
HXD118H
CAUTION:If the windows fog up with the Recirculation
or A.Q.S mode selected, set the air intake
control to the Fresh air position or A.Q.S
control to "OFF".

FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 64
B760A01E
The air filter is located in front of the blower unit
behind the glove box.
It operates to decrease pollutants from entering
the car and to filter the air.
Replacement instructions:1. Remove the adjusting pins on both sides of
the glove box.
2. Remove the cover mounting bracket on the
filter cover.
3. Remove the filter cover and replace the
filler.
4. Installation is the reverse order of disas-
sembly.
Evaporator coreBlower fan
Heater core
B760A02E-AATAIR FILTER (IN FRONT OF BLOWER
UNIT) (If Installed)
Outside air
Filter Inside air
Inside air
B980F02E-AATDefrost Switch
HXD118E
When the "Defrost" button is pressed, the " "
mode will be automatically selected and the air
will be discharged through the windshield de-
frost vents. To assist in defrosting, the air
conditioning will operate if ambient tempera-
ture is higher than 38.3°F, and automatically
turns off if the ambient temperature drops be-
low 38.3°F.
Face-LevelWhen selecting the "Face" mode, the indicator
light will come on, causing air to be discharged
through the face level vents.
Bi-LevelWhen selecting the "Bi-Level" mode, the indi-
cator light will come on and the air will be
discharged through the face vents and the floor
vents. This makes it possible to have cooler air
from the dashboard vents and warmer air from
the floor outlets at the same time.
Floor-LevelWhen selecting the "Floor-Level" mode, the
indicator light will come on and the air will be
discharged through the floor vents.
Floor-Defrost LevelWhen selecting the "Floor-Defrost" mode, the
indicator light will come on and the air will be
discharged through the windshield defrost vents
and the floor vents.

FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAIFEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
1- 91
Head
Cotton applicator
SSAR042B
o Be sure that the cassette label is not loose
or peeling off or tape ejection may be diffi-
cult.
o Never touch or soil the actual audio tape
surfaces.
o Keep all magnetized objects, such as elec-
tric motors, speakers or transformers away
from your cassette tapes and tape player
unit.
o Store cassettes in a cool, dry place with the
open side facing down to prevent dust from
setting in the cassette body.
o Avoid repeated fast reverse usage to replay
one given tune or tape section. This can
cause poor tape winding to occur, and even-
tually cause excessive internal drag and
poor audio quality in the cassette. If this
occurs, it can sometimes be corrected by
fast winding the tape from end to end sev-
eral times. If this does not correct the prob-
lem, do not continue to use the tape in your
vehicle.o The playback head, capstan and pinch
rollers will develop a coating of tape residue
that can result in deterioration of sound
quality, such as a wavering sound. They
should be cleaned monthly using a com-
mercially available head cleaning tape or
special solution available from audio spe-
cialty shops. Follow the supplier's direc-
tions carefully and never oil any part of the
tape player unit.
o Always be sure that the tape is tightly wound
on its reel before inserting in the player.
Rotate a pencil in the drive sprockets to
wind up any slack.NOTE: NOTE:NOTE: NOTE:
NOTE:Look at a tape before you insert it. Look at a tape before you insert it.Look at a tape before you insert it. Look at a tape before you insert it.
Look at a tape before you insert it.
If the tape is loose, tighten it by turning one If the tape is loose, tighten it by turning oneIf the tape is loose, tighten it by turning one If the tape is loose, tighten it by turning one
If the tape is loose, tighten it by turning one
of the hubs with a pencil or your finger. of the hubs with a pencil or your finger.of the hubs with a pencil or your finger. of the hubs with a pencil or your finger.
of the hubs with a pencil or your finger.
If the label is peeling off, do not put it in the If the label is peeling off, do not put it in theIf the label is peeling off, do not put it in the If the label is peeling off, do not put it in the
If the label is peeling off, do not put it in the
drive mechanism. drive mechanism.drive mechanism. drive mechanism.
drive mechanism.
Do not leave tape sitting where they are Do not leave tape sitting where they areDo not leave tape sitting where they are Do not leave tape sitting where they are
Do not leave tape sitting where they are
exposed to hot, warm or, high humidity, exposed to hot, warm or, high humidity,exposed to hot, warm or, high humidity, exposed to hot, warm or, high humidity,
exposed to hot, warm or, high humidity,
such as on top of the dashboard or in the such as on top of the dashboard or in thesuch as on top of the dashboard or in the such as on top of the dashboard or in the
such as on top of the dashboard or in the
player. player.player. player.
player.
If a tape is exposed to excessively hot or If a tape is exposed to excessively hot orIf a tape is exposed to excessively hot or If a tape is exposed to excessively hot or
If a tape is exposed to excessively hot or
cold, let it reach a moderate temperature cold, let it reach a moderate temperaturecold, let it reach a moderate temperature cold, let it reach a moderate temperature
cold, let it reach a moderate temperature
before putting it in the player. before putting it in the player.before putting it in the player. before putting it in the player.
before putting it in the player.
SSAR053BB880A02E