2003 Hyundai Elantra service

DO-IT-YOURSELF MAINTENANCE DO-IT-YOURSELF MAINTENANCEDO-IT-YOURSELF MAINTENANCE DO-IT-YOURSELF MAINTENANCE
DO-IT-YOURSELF MAINTENANCE
6-3
G020B01A-AAT
Vehicle Exterior Vehicle ExteriorVehicle Exterior Vehicle Exterior
Vehicle ExteriorThe following should be checked monthly:
o Overall appearance and condition
o Wheel condition and wheel nut torque
o Exhaust system condition
o Light condition and operation
o Windshield glass condition
o Wiper blade condition
o Paint condition and body corrosion
o Fluid leaks
o Door and hood lock condition
o Tire pressure and condition (including spare
tire)
G020C01A-AAT
Vehicle Interior Vehicle InteriorVehicle Interior Vehicle Interior
Vehicle InteriorThe following should be checked each time
when the vehicle is driven:
o Lights operation
o Windshield wiper operation
o Horn operation
o Defroster, heating system operation (and air
conditioning, if installed)
o Steering operation and condition
o Mirror condition and operation
o Turn signal operation
o Accelerator pedal operation
o Brake operation, including parking brake
o Manual transaxle operation, including clutch
operation
o Automatic transaxle operation, including
"Park" mechanism operation
o Seat control condition and operation
o Seat belt condition and operation
o Sunvisor operation
If you notice anything that does not operate
correctly or appears to be functioning incorrect-
ly, inspect it carefully and seek assistance from
your Hyundai dealer if service is needed.
G030A01A-AAT
CHECKING THE ENGINE OIL CHECKING THE ENGINE OILCHECKING THE ENGINE OIL CHECKING THE ENGINE OIL
CHECKING THE ENGINE OILEngine oil is essential to the performance and
service of the engine. It is suggested that you
check the oil level at least once a week in
normal use and more often if you are on a trip
or driving in severe conditions.
G030B02A-AAT
Recommended Oil Recommended OilRecommended Oil Recommended Oil
Recommended Oil
G030A02A
2.0L
SH, SG or SG/CD (API) multi-grade and fuel
efficient oil is recommended.
G020A01A-AAT
GENERAL CHECKS GENERAL CHECKSGENERAL CHECKS GENERAL CHECKS
GENERAL CHECKS
Engine Compartment Engine CompartmentEngine Compartment Engine Compartment
Engine Compartment
The following should be checked regularly:
o Engine oil level and condition
o Transaxle fluid level and condition
o Brake fluid level
o Clutch fluid level
o Engine coolant level
o Windshield washer fluid level
o Accessory drive belt condition
o Engine coolant hose condition
o Fluid leaks (on or below components)
o Power steering fluid level
o Battery conditio
o Air filter condition

DO-IT-YOURSELF MAINTENANCE DO-IT-YOURSELF MAINTENANCEDO-IT-YOURSELF MAINTENANCE DO-IT-YOURSELF MAINTENANCE
DO-IT-YOURSELF MAINTENANCE
6-5 3. Slide underneath the car and loosen the
drain plug by turning it counterclockwise
with a wrench of the proper size. Be sure
that a drain pan is in position to catch the oil
as it drains out, then remove the drain plug.
WARNING: WARNING:WARNING: WARNING:
WARNING:Be very careful when draining the engine oil Be very careful when draining the engine oilBe very careful when draining the engine oil Be very careful when draining the engine oil
Be very careful when draining the engine oil
as it may be hot enough to burn you! as it may be hot enough to burn you!as it may be hot enough to burn you! as it may be hot enough to burn you!
as it may be hot enough to burn you!
4. When the oil has stopped draining, replace
the drain plug using a new washer and
retighten by turning it clockwise.
Drain plug tightening torque: Drain plug tightening torque:Drain plug tightening torque: Drain plug tightening torque:
Drain plug tightening torque:
4.0 ~ 4.5 kgf.m 4.0 ~ 4.5 kgf.m4.0 ~ 4.5 kgf.m 4.0 ~ 4.5 kgf.m
4.0 ~ 4.5 kgf.m
5. Remove the oil filter. You should be able to
unscrew the filter with your hands. (If your
hands are slippery, try to use a cloth be-
tween your hands and the filter to give
yourself a better grip.) A certain amount of
oil will come out when you remove the filter,
so be sure to have your drain pan in place
underneath it.
6. Install a new oil filter in accordance with the
instructions on the carton or on the filter
itself. Do not over-tighten.
Oil filter tightening torque : 1.2 ~ 1.6 kgf.m Oil filter tightening torque : 1.2 ~ 1.6 kgf.mOil filter tightening torque : 1.2 ~ 1.6 kgf.m Oil filter tightening torque : 1.2 ~ 1.6 kgf.m
Oil filter tightening torque : 1.2 ~ 1.6 kgf.m
Be sure that the mounting surface on the
engine is clean and that the old gasket is
removed completely. Lubricate the new gas-
ket on the filter with clean engine oil before
installation.7. Refill the crankcase with the recommended
engine oil. Refer to the specification in chap-
ter 9 for engine oil capacity.
8. Start the engine and check to be sure no oil
is leaking from the drain plug or oil filter.
9. Shut off the engine and recheck the oil level.NOTE: NOTE:NOTE: NOTE:
NOTE:Always dispose of used engine oil in an Always dispose of used engine oil in anAlways dispose of used engine oil in an Always dispose of used engine oil in an
Always dispose of used engine oil in an
environmentally acceptable manner. It is sug- environmentally acceptable manner. It is sug-environmentally acceptable manner. It is sug- environmentally acceptable manner. It is sug-
environmentally acceptable manner. It is sug-
gested that it be placed in a sealed container gested that it be placed in a sealed containergested that it be placed in a sealed container gested that it be placed in a sealed container
gested that it be placed in a sealed container
and taken to a service station for reclama- and taken to a service station for reclama-and taken to a service station for reclama- and taken to a service station for reclama-
and taken to a service station for reclama-
tion. Do not pour the oil on the ground or tion. Do not pour the oil on the ground ortion. Do not pour the oil on the ground or tion. Do not pour the oil on the ground or
tion. Do not pour the oil on the ground or
put it into the household trash. put it into the household trash.put it into the household trash. put it into the household trash.
put it into the household trash.
WARNING: WARNING:WARNING: WARNING:
WARNING:Used motor oil may cause irritation or can- Used motor oil may cause irritation or can-Used motor oil may cause irritation or can- Used motor oil may cause irritation or can-
Used motor oil may cause irritation or can-
cer of the skin if left in contact with the skin cer of the skin if left in contact with the skincer of the skin if left in contact with the skin cer of the skin if left in contact with the skin
cer of the skin if left in contact with the skin
for prolonged periods of time. Wash your for prolonged periods of time. Wash yourfor prolonged periods of time. Wash your for prolonged periods of time. Wash your
for prolonged periods of time. Wash your
hands thoroughly with soap and warm wa- hands thoroughly with soap and warm wa-hands thoroughly with soap and warm wa- hands thoroughly with soap and warm wa-
hands thoroughly with soap and warm wa-
ter as soon as possible after handling used ter as soon as possible after handling usedter as soon as possible after handling used ter as soon as possible after handling used
ter as soon as possible after handling used
oil. oil.oil. oil.
oil.
G050A01A-AATCHECKING AND CHANGING THE CHECKING AND CHANGING THECHECKING AND CHANGING THE CHECKING AND CHANGING THE
CHECKING AND CHANGING THE
ENGINE COOLANT ENGINE COOLANTENGINE COOLANT ENGINE COOLANT
ENGINE COOLANT
WARNING: WARNING:WARNING: WARNING:
WARNING:
Do not remove the radiator cap when the Do not remove the radiator cap when theDo not remove the radiator cap when the Do not remove the radiator cap when the
Do not remove the radiator cap when the
engine is hot. When the engine is hot, the engine is hot. When the engine is hot, theengine is hot. When the engine is hot, the engine is hot. When the engine is hot, the
engine is hot. When the engine is hot, the
engine coolant is under pressure and may engine coolant is under pressure and mayengine coolant is under pressure and may engine coolant is under pressure and may
engine coolant is under pressure and may
erupt through the opening if the cap is erupt through the opening if the cap iserupt through the opening if the cap is erupt through the opening if the cap is
erupt through the opening if the cap is
removed. You could be seriously burned if removed. You could be seriously burned ifremoved. You could be seriously burned if removed. You could be seriously burned if
removed. You could be seriously burned if
you do not observe this precaution. Do not you do not observe this precaution. Do notyou do not observe this precaution. Do not you do not observe this precaution. Do not
you do not observe this precaution. Do not
G050B01A-AAT
Recommended Engine Coolant Recommended Engine CoolantRecommended Engine Coolant Recommended Engine Coolant
Recommended Engine Coolant
Use a high quality ethylene-glycol coolant in a
50/50 mix with water. The engine coolant should
be compatible with aluminum engine parts.
Additional corrosion inhibitors or additives should
not be used. The cooling system must be main-
tained with the correct concentration and type
of engine coolant to prevent freezing and corro-
sion. Never allow the concentration of anti-
freeze to exceed the 60% level or go below the
35% level, or damage to the cooling system
may result. For proper concentration when add-
ing or replacing the engine coolant, refer to the
following table.
G050C01E
remove the radiator cap until the radiator is remove the radiator cap until the radiator isremove the radiator cap until the radiator is remove the radiator cap until the radiator is
remove the radiator cap until the radiator is
cool to the touch. cool to the touch.cool to the touch. cool to the touch.
cool to the touch.

DO-IT-YOURSELF MAINTENANCE DO-IT-YOURSELF MAINTENANCEDO-IT-YOURSELF MAINTENANCE DO-IT-YOURSELF MAINTENANCE
DO-IT-YOURSELF MAINTENANCE
6-12
G120C02A-AAT
Recommended Brake Fluid Recommended Brake FluidRecommended Brake Fluid Recommended Brake Fluid
Recommended Brake FluidUse only hydraulic brake fluid conforming to
DOT 3 or DOT 4 specifications in your braking
system. Follow the instructions printed on the
container.
G120D01A-AAT
To Check the Fluid Level To Check the Fluid LevelTo Check the Fluid Level To Check the Fluid Level
To Check the Fluid LevelThe fluid level in the brake fluid reservoir should
be checked periodically. The level should be
between the "MIN" and "MAX" marks on the
side of the reservoir. If the level is at or below
the "MIN" mark, carefully add fluid to bring it up
to "MAX". Do not overfill.
G120E02A-AAT
Adding Brake Fluid Adding Brake FluidAdding Brake Fluid Adding Brake Fluid
Adding Brake FluidWARNING: WARNING:WARNING: WARNING:
WARNING:
Handle brake fluid carefully. It can damage Handle brake fluid carefully. It can damageHandle brake fluid carefully. It can damage Handle brake fluid carefully. It can damage
Handle brake fluid carefully. It can damage
your vision if it gets into your eyes. Use only your vision if it gets into your eyes. Use onlyyour vision if it gets into your eyes. Use only your vision if it gets into your eyes. Use only
your vision if it gets into your eyes. Use only
DOT 3 or DOT 4 specification fluid from a DOT 3 or DOT 4 specification fluid from aDOT 3 or DOT 4 specification fluid from a DOT 3 or DOT 4 specification fluid from a
DOT 3 or DOT 4 specification fluid from a
sealed container. Do not allow the fluid can sealed container. Do not allow the fluid cansealed container. Do not allow the fluid can sealed container. Do not allow the fluid can
sealed container. Do not allow the fluid can
or reservoir to remain open any longer than or reservoir to remain open any longer thanor reservoir to remain open any longer than or reservoir to remain open any longer than
or reservoir to remain open any longer than
required. This will prevent entry of dirt and required. This will prevent entry of dirt andrequired. This will prevent entry of dirt and required. This will prevent entry of dirt and
required. This will prevent entry of dirt and
moisture which can damage the brake sys- moisture which can damage the brake sys-moisture which can damage the brake sys- moisture which can damage the brake sys-
moisture which can damage the brake sys-
tem and cause improper operation. tem and cause improper operation.tem and cause improper operation. tem and cause improper operation.
tem and cause improper operation.
To add brake fluid, first wipe away any dirt then
unscrew the fluid reservoir cap. Slowly pour the
recommended fluid into the reservoir. Do not
overfill. Carefully replace the cap on the reser-
voir and tighten.
G130A01S-AAT
CHECKING THE CLUTCH FLUID CHECKING THE CLUTCH FLUIDCHECKING THE CLUTCH FLUID CHECKING THE CLUTCH FLUID
CHECKING THE CLUTCH FLUID
To Check the Clutch Fluid To Check the Clutch FluidTo Check the Clutch Fluid To Check the Clutch Fluid
To Check the Clutch Fluid
G120E01E
G130A01EG130B02A-AAT
To Replace the Fluid To Replace the FluidTo Replace the Fluid To Replace the Fluid
To Replace the FluidRecommended brake fluid conforming to DOT
3 or DOT 4 specification should be used. The
reservoir cap must be fully tightened to avoid
contamination from foreign matter or moisture.
NOTE: NOTE:NOTE: NOTE:
NOTE:Do not allow any other liquids to contami- Do not allow any other liquids to contami-Do not allow any other liquids to contami- Do not allow any other liquids to contami-
Do not allow any other liquids to contami-
nate the brake fluid. Seal damage will result. nate the brake fluid. Seal damage will result.nate the brake fluid. Seal damage will result. nate the brake fluid. Seal damage will result.
nate the brake fluid. Seal damage will result.
WARNING: WARNING:WARNING: WARNING:
WARNING:Use caution when handling brake fluid. It Use caution when handling brake fluid. ItUse caution when handling brake fluid. It Use caution when handling brake fluid. It
Use caution when handling brake fluid. It
can damage your vision if you get it in your can damage your vision if you get it in yourcan damage your vision if you get it in your can damage your vision if you get it in your
can damage your vision if you get it in your
eyes. It will also damage your vehicle's paint eyes. It will also damage your vehicle's painteyes. It will also damage your vehicle's paint eyes. It will also damage your vehicle's paint
eyes. It will also damage your vehicle's paint
if spilled on it and not removed immediately. if spilled on it and not removed immediately.if spilled on it and not removed immediately. if spilled on it and not removed immediately.
if spilled on it and not removed immediately.
The clutch fluid level in the master cylinder
should be checked when performing other un-
der hood services. The system should be
checked for leakage at the same time.
Check to make certain that the clutch fluid level
is always between the "MAX" and "MIN" level
markings on the fluid reservoir. Fill as required.
Fluid loss indicates a leak in the clutch system
which should be inspected and repaired imme-
diately. Consult your Hyundai dealer.

CONSUMER INFORMATION & REPORTING SAFETY DEFECTS CONSUMER INFORMATION & REPORTING SAFETY DEFECTSCONSUMER INFORMATION & REPORTING SAFETY DEFECTS CONSUMER INFORMATION & REPORTING SAFETY DEFECTS
CONSUMER INFORMATION & REPORTING SAFETY DEFECTS
8-4
I130A01A-AAT
CONSUMER INFORMATION CONSUMER INFORMATIONCONSUMER INFORMATION CONSUMER INFORMATION
CONSUMER INFORMATIONThis consumer information has been prepared
in accordance with regulations issued by the
National Highway Traffic Safety Administration
of the U.S. Department of Transportation. It
provides the purchasers and/or prospective
purchasers of Hyundai automobiles with infor-
mation on uniform tire quality grading. Your
Hyundai dealer will help answer any questions
you may have as you read this information.
I130B03A-AAT
Uniform tire quality grading Uniform tire quality gradingUniform tire quality grading Uniform tire quality grading
Uniform tire quality gradingDepartment of Transportation quality grades -
All passenger vehicle tires must conform to
Federal Safety Standards in addition to these
grades. These quality grades are molded on the
sidewall.
Treadwear - Treadwear -Treadwear - Treadwear -
Treadwear - The tread wear grade is a com-
parative rating based on the wear rate of the tire
when tested under controlled conditions on a
specified government test course. For exam-
ple, a tire graded 150 would wear one and a half
(1 - 1/2) times as well on the government
course as a tire graded 100. The relative perfor-
mance of tires depends upon the actual condi-
tions of their use, however, and may depart
significantly from the norm due to variations in
driving habits, service practices and differenc-
es in road characteristics and climate.Traction AA, A, B, C - Traction AA, A, B, C -Traction AA, A, B, C - Traction AA, A, B, C -
Traction AA, A, B, C - The traction grades,
from highest to lowest, are AA, A, B, and C.
Those grades represent the tire's ability to stop
on wet pavement as measured under controlled
conditions on specified government test surfac-
es of asphalt and concrete. A tire marked C
may have poor traction performance.
WARNING: WARNING:WARNING: WARNING:
WARNING:The traction grade assigned to this tire is The traction grade assigned to this tire isThe traction grade assigned to this tire is The traction grade assigned to this tire is
The traction grade assigned to this tire is
based on straight-ahead braking based on straight-ahead braking based on straight-ahead braking based on straight-ahead braking
based on straight-ahead braking
traction tractiontraction traction
traction
tests, and does not include acceleration, tests, and does not include acceleration,tests, and does not include acceleration, tests, and does not include acceleration,
tests, and does not include acceleration,
cornering, hydroplaning, or peak traction cornering, hydroplaning, or peak tractioncornering, hydroplaning, or peak traction cornering, hydroplaning, or peak traction
cornering, hydroplaning, or peak traction
characteristics. characteristics.characteristics. characteristics.
characteristics.
Temperature A, B, C - Temperature A, B, C -Temperature A, B, C - Temperature A, B, C -
Temperature A, B, C - The temperature grades
are A (the highest), B, and C, representing the
tire's resistance to the generation of heat and
its ability to dissipate heat when tested under
controlled conditions on a specified indoor lab-
oratory test wheel. Sustained high temperature
can cause the material of the tire to degenerate
and reduce tire life, and excessive temperature
can lead to sudden tire failure. The grade C
corresponds to a level of performance which all
passenger car tires must meet under the Fed-
eral Motor Vehicle Safety Standard No. 109.
Grades B and A represent higher levels of
performance on the laboratory test wheel than
the minimum required by law.
WARNING: WARNING:WARNING: WARNING:
WARNING:The temperature grade for this tire is estab- The temperature grade for this tire is estab-The temperature grade for this tire is estab- The temperature grade for this tire is estab-
The temperature grade for this tire is estab-
lished for a tire that is properly lished for a tire that is properly lished for a tire that is properly lished for a tire that is properly
lished for a tire that is properly
inflated and inflated andinflated and inflated and
inflated and
not overloaded. Excessive speed, not overloaded. Excessive speed,not overloaded. Excessive speed, not overloaded. Excessive speed,
not overloaded. Excessive speed,
underinflation, or excessive underinflation, or excessive underinflation, or excessive underinflation, or excessive
underinflation, or excessive
loading, either loading, eitherloading, either loading, either
loading, either
separately or in combination, can cause heat separately or in combination, can cause heatseparately or in combination, can cause heat separately or in combination, can cause heat
separately or in combination, can cause heat
buildup and possible tire failure. buildup and possible tire failure.buildup and possible tire failure. buildup and possible tire failure.
buildup and possible tire failure.
Uniform Tire Quality Grading Uniform Tire Quality GradingUniform Tire Quality Grading Uniform Tire Quality Grading
Uniform Tire Quality Grading - Quality grades
can be found on the tire sidewall between the
tread shoulder and the maximum section width.
For example:
Treadwear 200 Traction AA
Temperature A

INDEX INDEXINDEX INDEX
INDEX
10-3 S SS S
S
Seat Belts
3-Point system ................................................................... 1-13 ~ 1-16
Adjustable height ...........................................................................1-13
Adjusting your seat belt ................................................................1-14
Care of seat belts .........................................................................1-12
Precautions ...................................................................................1-11
Spark Plugs ............................................................................... 6-7 ~ 6-8
Spectacle Case .................................................................................1-44
Speedometer.....................................................................................1-33
Starting Procedures ............................................................................ 2-3
Steering Wheel
Free play .......................................................................................6-13
Tilt lever ........................................................................................1-52
Stereo Radio Operation (H240, H260, H290)
................................................. 1-68 ~ 1-70, 1-73 ~ 1-75, 1-80 ~ 1-82
Stereo Sound System ............................................................ 1-66 ~ 1-67
Sun Visor ..........................................................................................1-51
Sunroof..............................................................................................1-42
Sunshade..........................................................................................1-42
T TT T
T
Tachometer............................................................................ 1-33 ~ 1-34
Tail Gate ...........................................................................................1-51
Theft Alarm System ................................................................... 1-4 ~ 1-6
Tires
Balancing ......................................................................................... 8-2
Chains ............................................................................................. 8-2
Changing a flat tire .......................................................................... 3-4
If you have a flat tire ....................................................................... 3-3
Information....................................................................................... 8-1
Pressure .......................................................................................... 8-1
Replacement................................................................................... 8-3
Rotation........................................................................................... 8-2 K KK K
K
Keys .................................................................................................... 1-2
If you lose your keys ...................................................................... 3-9
Positions .......................................................................................... 2-2
L LL L
L
Replacing Light Bulbs .......................................................................6-18
Lubrication Chart ................................................................................. 9-3
M MM M
M
Maintenance Intervals
Explanation of scheduled maintenance items ........................ 5-6 ~ 5-8
Maintenance under severe usage conditions ................................. 5-5
Scheduled maintenance ......................................................... 5-3 ~ 5-4
Service requirements ...................................................................... 5-1
Mirros
Day-night inside rearview ..............................................................1-47
Outside rear view ..........................................................................1-45
Multi Box ...........................................................................................1-45
O OO O
O
Odometer................................................................................. 1-34, 1-35
P PP P
P
Parking Brake ...................................................................................1-47
Passenger Presence Detection ........................................................1-24
Power Steering Fluid Level ...............................................................6-17
Pre-tensioner Seat Belt .......................................................... 1-20 ~ 1-21
R RR R
R
Rear Seatbacks
Fold down ............................................................................. 1-9 ~ 1-11
Drink holder ...................................................................................1-41
Rear Window Defroster Switch .........................................................1-39
Rear Window Wiper and Washor .....................................................1-39

Seoul Korea
Printing: JAN. 24, 2003
Publication No.: A2DO-EU31P
Printed in Korea
SERVICE STATION INFORMATION FUEL:
UNLEADED gasoline only
Pump Octane Rating of 87 (Research Octane Number 91) or higher.
FUEL TANK CAPACITY
Original, US.gal (Imp.gal., liter) 14.5 (12, 55)
TIRE PRESSURE:
See the label on the driver side center pillar outer panel.
OTHER TIRE INFORMATION:
See pages 8-1 through 8-4
HOOD RELEASE:
Pull handle under left side of dash.
ENGINE OIL:
For other viscosity recommendations, see page 6-3.
MANUAL TRANSAXLE:
HYUNDAI GENUINE PARTS MTF 75W/90 (API GL-4) Oil level
should be up to filler-bolt hole in housing beside differential.
AUTOMATIC TRANSAXLE:
Apply the parking brake, with the engine running, shift the selector
lever through all ranges and return to "N" (Neutral) position. Then
check the level of fluid on the dipstick. Use only HYUNDAI GENU-
INE ATF available at your dealer, DIAMOND ATF SP-III or SK ATF
SP-III.
QUICK INDEX
o Car will not start ........................................................................ 3-1
o Flat tire ...................................................................................... 3-3
o Warning light/chime comes on ...................................... 1-30 ~ 1-32
o Engine overheats ....................................................................... 3-2
o Towing of your vehicle .............................................................. 3-7
o Starting the engine ..................................................................... 2-3
o Driving tips for first 1,200 miles (2,000 km) ............................ 1-1
o Scheduled maintenance ............................................................. 5-3
o Reporting safety defects ............................................................ 8-6
2.0 L
SH, SG or SG/CD multigrade and fuel efficient
oil. Use SAE 10W-30, 10W-40 or 10W-50 if
normal temperatures are above -10°F (-23°C).2.0 L SULEV
SH(API) or GF-I(ILSAC) multigrade and fuel
efficient oil. Use SAE 10W-30 or 10W-40 if
normal temperatures are above -10°F (-23°C).