2003 HONDA S2000 wheel

µCheck your tires
f requently f or wear and proper
pressure. Both are important in
preventing ‘‘hydroplaning’’ (loss of
traction on a wet surface). In the
winter, mount snow tires on all f our
wheels f or the best handling.
Watch road conditions caref ully,
they can change f rom moment to
moment. Wet leaves can be as slip-
pery as ice. ‘‘Clear’’ roads can have
patches of ice. Driving conditions
can be very hazardous when the
outside temperature is near f reezing.
The road surf ace can become
covered with areas of water puddles
mixed with areas of ice, so your
traction can change without warning.
Be caref ul when downshif ting. If
traction is low, you can lock up the
drive wheels f or a moment and cause
askid. Be very cautious when passing, or
beingpassedbyothercars.The
spray f rom large cars reduces your
visibility, and the wind buf f eting can
cause you to lose control.Your car is not designed to tow a
trailer. Attempting to do so can void
your warranties.
Driving
Traction
Towing a Trailer
Driving in Bad Weather, Towing a Trailer
145

This section also includes
Maintenance Schedules f or normal
driving and severe driving conditions,
a Maintenance Record, and instruc-
tions f or simple maintenance tasks
you may want to take care of
yourself . This section explains why it is
important to keep your car well
maintained and how to f ollow basic
maintenance saf ety precautions.
If you have the skills and tools to per-
f orm more complex maintenance
tasks on your Honda, you may want
to purchase the Service Manual. See
page f or inf ormation on how to
obtain a copy, or see your Honda
dealer.......................
Maintenance Saf ety .148
.
Important Safety Precautions . 149
.................
Maintenance Schedule . 150
...
Required Maintenance Record . 157
.......
Owner Maintenance Checks . 159
..............................
Fluid Locations .160
......................................
Engine Oil .161
..................................
Adding Oil .161
....................
Recommended Oil .161
..............................
Synthetic Oil .162
....................................
Additives .162
.....
Changing the Oil and Filter . 163
.............................
Cooling System .165
............
Adding Engine Coolant . 165
.......
Replacing Engine Coolant . 167
....................
Windshield Washers .171
6-speed Manual Transmission ...........................................
Fluid .172
..........................
Dif f erential Fluid .173
................
Brake and Clutch Fluid . 174
............................
Brake System .174
...........................
Clutch System .175
.....................
Air Cleaner Element .176
....................................
Hood Latch .178 ....................................
Spark Plugs .178
..............................
Replacement .178
............................
Specif ications .180
...........................................
Battery .181
.................................
Wiper Blades .184
..............
Air Conditioning System . 186
..................
Dust and Pollen Filter . 187
.......................................
Drive Belt .188
...............................................
Tires .189
......................................
Inf lation .189
..................................
Inspection .191
..............................
Maintenance .192
.............................
Tire Rotation .192
...................................
Tire Wear .192
...
Replacing Tires and Wheels . 193
......................
Wheels and Tires .194
..........................
Winter Driving .194
.............................
Snow Tires .195
............................
Tire Chains .195
.............................................
Lights .196
.....................
Headlight Aiming .198
........................
Replacing Bulbs .198
...........................
Storing Your Car .206
267
Maintenance
Maint enance147

In addition to proper inf lation,
correct wheel alignment helps to
decrease tire wear. If you f ind a tire
is worn unevenly, have your dealer
check the wheel alignment.
The tires were properly balanced by
the factory. They may need to be
rebalanced at some time bef ore they
are worn out. Have your dealer
check the tires if you f eel a consis-
tent vibration while driving. A tire
should always be rebalanced if it is
removed f rom the wheel f or repair.Make sure the installer balances the
wheels when you have new tires
installed. This increases riding
comf ort and tire lif e. Your car’s
original tires were dynamic or ‘‘spin’’
balanced at the f actory. For best
results, have the installer perf orm a
dynamic balance.
You should not rotate your Honda’s
tires. The f ront and rear tires are
dif f erent sizes, so they cannot be
rotated f ront-to-rear. The original-
equipment tires on your Honda have
a unidirectional tread pattern, so
they cannot be rotated side-to-side.
The tires that came on your car were
designed and constructed to provide
superior grip during acceleration,
braking, and cornering. As a trade-
of f , they will wear more rapidly than
tiresusedonordinarypassenger
cars. Because of the car’s weight
distribution, and the f act that they
are the driving wheels, you may
expect the rear tires to wear more
rapidly than the f ront tires.
Maintenance
T ire Rotation
Tire Wear
Tires
Maint enance192
Improper wheel weights can damage
your vehicle’s aluminum wheels. Use
only genuine Honda wheel weights f or
balancing.

CONT INUED
The tires that came with your car
were selected to match the perform-
ance capabilities of the car while
providing the best combination of
handling, ride comf ort, and long lif e.
Youshouldreplacethemwithradial
tires of the same size, load range,
speed rating, and maximum cold tire
pressure rating (as shown on the
tire’s sidewall). Mixing radial and
bias-ply tires on your car can reduce
its braking ability, traction, and
steering accuracy.It is best to replace all f our tires at
thesametime.If thatisnotpossible
or necessary, then replace the two
f ront tires or the two rear tires as a
pair. Replacing just one tire can
seriously af f ect your car’s handling.
You should caref ully inspect your
car’s tires f or wear, damage, and
proper inf lation every 7,500 miles
(12,000 km) (see page ).
189Replacing T ires and Wheels
Tires
Maint enance193
Installing improper tires on your
car can affect handling and
stability. This can cause a crash
in which you can be seriously
hurt or killed.
Always use the size and type of
tires recommended in this
owner’s manual.

´
Wheels:
Front:
Rear:
Tires: Front:
Rear:
TheABSworksbycomparingthe
speed of the wheels. When replacing
tires, use the same size originally
supplied with the car. Tire size and
construction can af f ect wheel speed
and may cause the system to work in-
consistently.
If you ever need to replace a wheel,
make sure the wheel’s specif ications
match those of the original wheel
that came on your car. Replacement
wheels are available at your Honda
dealer.
See page f or inf ormation about
DOT Tire Quality Grading.Tires that are marked ‘‘M S’’ on the
sidewall have an all-weather tread
design. They should be suitable f or
most winter driving conditions. Tires
without these markings are designed
f or optimum traction in dry
conditions. They may not provide
adequate perf ormance in winter
driving.
For the best perf ormance in snowy
or icy conditions, you should install
snow tires or tire chains. They may
be required by local laws under
certain conditions.
252 Winter Driving
Wheels and T ires
Tires
Maint enance194
16x71/2JJ 16x61/2JJ
205/55R16 89W
225/50R16 92W

If you mount snow tires on your
Honda, make sure they are radial
tires of the same size and load range
as the original tires. Mount snow
tiresonallfourwheelstobalance
your vehicle’s handling in all weather
conditions. Keep in mind the traction
provided by snow tires on dry roads
may not be as high as your vehicle’s
original equipment tires. You should
drive cautiously even when the roads
areclear.Checkwiththetiredealer
f or maximum speed recommenda-
tions.Because your Honda has limited tire
clearance, mount only SAE Class ‘‘S’’
cable-type traction devices on the
rear tires. Use traction devices only
when required by driving conditions
or local laws. Make sure they are the
correct size f or your tires.
Metal link-type ‘‘chains’’ should not
be used. No matter how tight they
seem to be installed, they can come
into contact with the body and
suspension, causing serious damage.
When installing cables, f ollow the
manuf acturer’s instructions and
mount them as tightly as you can.
Drive slowly with them installed. If
youhearthemcomingincontact
with the body or chassis, stop and
investigate. Make sure the cables are
installed tightly, and that they are
not contacting the brake lines or
suspension. Remove them as soon as
you begin driving on cleared roads.
Snow T ires
T ire Chains
Tires
Maint enance195
Cables that are the wrong size or
improperly installed can damage your
car’s brake lines, suspension, body, and
wheels. Stop driving if they are hitting
any part of the car.

If you are changing the bulb on
the driver’s side, start the engine,
turn the steering wheel all the way
to the right, and turn off the
engine. If you are changing the
bulb on the passenger’s side, turn
the steering wheel to the left.Pull the inner f ender cover back.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket.Install the new bulb in the socket.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Testthelightstomakesurethe
new bulb is working.
Use a f lat-tipped screwdriver to
remove the three holding clips
f rom the inner f ender.
Put the inner f ender cover in place.
Install the three holding clips.
Lock each clip in place by pushing
on the center.
1.
2.
3.
4.
5.6.
7.
8.
9.
Lights
Maint enance
Replacing Front Turn Signal and
Side Marker L ight Bulbs
200

Block the rear wheels.
Disconnect the battery.If possible, run the engine f or a
while periodically (pref erably once
amonth).
Support the f ront wiper blade
arms with a f olded towel or rag so
they do not touch the windshield.
To minimize sticking, apply a
silicone spray lubricant to all door
and trunk seals. Also, apply a
vehiclebodywaxtothepainted
surfaces that mate with the door
and trunk seals.
Fill the f uel tank.
Change the engine oil and f ilter
(see page ).
Wash and dry the exterior
completely.
Cleantheinterior.Makesurethe
carpeting, floor mats, etc. are
completely dry.
If you need to park your car f or an
extended period (more than one
month), there are several things you
should do to prepare it f or storage.
Proper preparation helps prevent
deterioration and makes it easier to
get your car back on the road. If
possible, store your car indoors.
If the car is to be stored for a
longer period, it should be
supported on jackstands so the
tires are of f the ground.
Leave one window open slightly (if
the car is being stored indoors).Coverthecarwitha‘‘breathable’’
cover, one made f rom a porous
material such as cotton.
Nonporous materials, such as
plastic sheeting, trap moisture,
which can damage the paint.
If you store your car f or 12 months
or longer, have your Honda dealer
perf orm the inspections called f or in
the 24 months/30,000 miles (48,000
km) maintenance schedule as soon
as you take it out of storage (see
page ). The replacements called
f or in the maintenance schedule are
not needed unless the car has
actually reached that time or mileage.
Raise the convertible top cover.
Leave the parking brake off. Put
the transmission in Reverse. 163
152
Maint enance
St oring Your Car
206