2003 HONDA CR-V parking brake

[x] Cancel search: parking brake

Page 81 of 374

HONDA CR-V 2003 RD4-RD7 / 2.G Owners Manual Canadian models only
With the headlight switch off, the
high beam headlights come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on

Page 86 of 374

HONDA CR-V 2003 RD4-RD7 / 2.G Owners Manual To release the parking brake, push
andholdthereleasebuttononthe
side of the parking brake lever, pull
the lever toward you slightly, then
push the lever f orward.
The parking brake light on the
instru

Page 190 of 374

HONDA CR-V 2003 RD4-RD7 / 2.G Owners Manual Shift to Park or Neutral and set
the parking brake. Pull the hood
release handle located under the
lower lef t corner of the dashboard.
The hood will pop up slightly.
Screw the f uel f ill cap back on

Page 201 of 374

HONDA CR-V 2003 RD4-RD7 / 2.G Owners Manual This section gives you tips on
starting the engine under various
conditions, and how to operate the
5-speed manual and automatic
transmissions. It also includes
important inf ormation on parking
your

Page 204 of 374

HONDA CR-V 2003 RD4-RD7 / 2.G Owners Manual If the engine still does not start,
press the accelerator pedal all the
way down and hold it there while
starting in order to clear f looding.
As bef ore, keep the ignition key in
the START (III) posi

Page 213 of 374

HONDA CR-V 2003 RD4-RD7 / 2.G Owners Manual This allows you to move the shif t
lever out of Park if the normal
method of pushing on the brake
pedal does not work. This procedure
is also used to release the Reverse
Lockout.Put a cloth on the edg

Page 214 of 374

HONDA CR-V 2003 RD4-RD7 / 2.G Owners Manual µ
Always use the parking brake when
you park your vehicle. The indicator
on the instrument panel shows that
the parking brake is not f ully
released; it does not indicate that the
parking brake is f

Page 218 of 374

HONDA CR-V 2003 RD4-RD7 / 2.G Owners Manual Î
Î
The ABS is self -checking. If anything
goes wrong, the ABS indicator on
the instrument panel comes on (see
page ). This means the anti-lock
f unction of the braking system has
shut down. The b