2003 HONDA CIVIC HATCHBACK headlight bulb

This light has two f unctions:This indicator comes on when you
turn the ignition switch ON (II). It
is a reminder to check the parking
brake. Driving with the parking
brake not f ully released can
damage the brakes and tires.
If the indicator remains lit after
you have f ully released the
parking brake while the engine is
running, or if it comes on while
driving, it can indicate a problem
in the brake system. For complete
inf ormation, see page . See page .
The lef t or right turn signal light
blinks when you signal a lane change
or turn. If the light does not blink or
blinks rapidly, it usually means one
of the turn signal bulbs is burned out
(see page ). Replace the bulb as
soon as possible, since other drivers
cannot see that you are signaling.
This light comes on if the hatch is
not closed tightly. This indicator lights when you turn
the ignition switch to ON (II) with
the headlight switch of f and the
parking brake set. It should go of f if
youturnontheheadlightsorrelease
the parking brake. If it comes on at
any other time, it means there is a
problem with the DRL. There may
also be a problem with the high
beam headlights.
This light comes on with the high
beam headlights. See page f or
inf ormation on the headlight
controls.
WhenyouturnontheHazard
Warning switch, both turn signal
lights blink. All turn signals on the
outside of the vehicle should f lash.
On Canadian model, this indicator
comes on with reduced brightness
when the Daytime Running Lights
(DRL) are on (see page ).
1. 2.
6766
238 236
200
Canadian model only
Indicator L ights
Inst rument s and Cont rols
Parking Brake
and Brake
System
Indicator
Malf unction Indicator
Lamp
Turn Signal and
Hazard Warning
Indicators
Hatch-open Indicator ‘‘Daytime Running
Lights’’ Indicator
High Beam Indicator
59
U.S. Canada

This section also includes
Maintenance Schedules f or normal
driving and severe driving conditions,
a Maintenance Record, and instruc-
tions f or simple maintenance tasks
you may want to take care of
yourself .
If you have the skills and tools to per-
f orm more complex maintenance
tasks on your Honda, you may want
to purchase the Service Manual. See
page f or inf ormation on how to
obtain a copy, or see your Honda
dealer.
This section explains why it is
important to keep your car well
maintained and how to f ollow basic
maintenance saf ety precautions.
......................
Maintenance Saf ety . 154
.
Important Safety Precautions . 155
.................
Maintenance Schedule . 156
...
Required Maintenance Record . 163
.......
Owner Maintenance Checks . 165
..............................
Fluid Locations . 166
......................................
Engine Oil . 167
..................................
Adding Oil . 167
....................
Recommended Oil . 167
..............................
Synthetic Oil . 168
....................................
Additives . 168
.....
Changing the Oil and Filter . 169
.............................
Cooling System . 171
............
Adding Engine Coolant . 171
.......
Replacing Engine Coolant . 173
....................
Windshield Washers . 176
.......................
Transmission Fluid . 177
................
Brake and Clutch Fluid . 177
............................
Brake System . 178
...........................
Clutch System . 178
.....................
Air Cleaner Element . 179
....................................
Hood Latch . 181
....................................
Spark Plugs . 181
..............................
Replacement . 181
............................
Specif ications . 183
...........................................
Battery . 184 .................................
Wiper Blades . 186
..............
Air Conditioning System . 189
..................
DustandPollenFilter .190
.....................................
Drive Belts . 192
...............................................
Tires . 193
......................................
Inf lation . 193
Recommended TirePressures f or Normal ...........................
Driving . 194
Tire Pressure Adjustment ....
f or High Speed Driving . 194
..................................
Inspection . 195
..............................
Maintenance . 195
.............................
Tire Rotation . 196
...
Replacing Tires and Wheels . 197
......................
Wheels and Tires . 198
..........................
Winter Driving . 198
.............................
Snow Tires . 199
............................
Tire Chains . 199
.............................................
Lights . 200
.....................
Headlight Aiming . 202
........................
Replacing Bulbs . 202
...........................
Storing Your Car . 212
265
Maintenance
Maint enance
153

Check the operation of your car’s
exterior lights at least once a month.
A burned out bulb can create an
unsaf e condition by reducing your
car’s visibility and the ability to
signal your intentions to other
drivers.
Lights
Maint enance
200 HEADLIGHT PARKING LIGHT
TURN SIGNAL LIGHT SIDE TURN SIGNAL LIGHT SIDE MARKER LIGHT

Check the f ollowing:
If youfindanybulbsareburnedout,
replace them as soon as possible.
Refer to the chart on page to
determinewhattypeof replacement
bulb is needed.Headlights (low and high beam)
Parking lights
Taillights
Brake lights
High-mount brake light
Turn signals
Back-up lights
Hazard light f unction
License plate lights
Side marker lights
Daytime running lights
(Canadian model)
251
Lights
Maint enance201
TURN SIGNAL
LIGHT
BACK-UP
LIGHT
SIDE MARKER
LIGHT
STOP/TAILLIGHT LICENSE PLATE
LIGHTS
HIGH-MOUNT BRAKE LIGHT

Open the hood.
Remove the electrical connector
f rom the bulb by pulling the
connector straight back.
Your car has halogen headlight
bulbs, one on each side. When
replacing a bulb, handle it by its steel
base and protect the glass from
contactwithyourskinorhard
objects. If you touch the glass, clean
it with denatured alcohol and a clean
cloth.
Theheadlightswereproperlyaimed
when your car was new. If you
regularly carry heavy items in the
cargo area, readjustment may be
required. Adjustment of the
headlights should be perf ormed by a
Honda technician or other qualif ied
mechanic.
1. 2.
Replacing a Headlight Bulb
Headlight A iming
Lights
Maint enance
202 BULB WEATHER SEAL
HOLD-DOWN WIRE CONNECTOR
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.

Remove the rubber weather seal
by pulling on the tab.
Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place and clip the end into
the slot.
Install the rubber seal over the
back of the headlight assembly.
Make sure it is right side up; it is
marked ‘‘TOP.’’
Push the electrical connector onto
the tabs of the new bulb. Make
sure it locks in place.
Turn on the headlights to test the
new bulb.Use a f lat-tipped screwdriver to
remove the holding clip f rom the
inner f ender.
Pull the inner f ender cover back.
Unclip the hold-down wire f rom its
slot by pushing it in and up. Pivot
it out of the way and remove thebulb.
If you are changing the bulb on
the driver’s side, start the engine,
turn the steering wheel all the way
to the right, and turn off the
engine. If you are changing the
bulb on the passenger’s side, turn
the steering wheel to the left.
3. 4. 5. 6. 7. 1.
3.
2.
CONT INUED
Replacing a Front T urn Signal Bulb
Lights
Maint enance
203
HOLDING CLIP

Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Remove the burned out bulb f rom
thesocketbypushingitinand
turning the bulb counterclockwise
until it unlocks.Install the new bulb in the socket.
Turn it clockwise to lock it in place.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Testthelightstomakesurethe
new bulb is working.
Put the inner f ender cover in place.
Install the holding clip. Lock it in
placebypushingonthecenter.
Front bumper: Push the f ront
edge of the side marker lens
toward the rear of the vehicle. The
f ront edge will pop out of the
bumper.
Rear bumper: Push the rear edge
of thesidemarkerlenstowardthe
f ront of the vehicle. The rear edge
will pop out of the bumper.
4. 5. 6. 7. 8. 9.
1.
Replacing a Side Marker Bulb
Lights
Maint enance
204 SOCKET
BULB BULB
SOCKET

Open the hood. The f ront parking
light is next to the headlight bulb.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Place the tabbed end of the side
marker assembly into the bumper
f irst, then the looped end. Press on
the looped end to get the assembly
to snap back in place.
Testthelightstomakesurethe
new bulb is working.
Put the socket back into its hole in
the lens and turn it clockwise until
it locks.
Push the new bulb straight into
the socket until it bottoms.
Pull the bulb straight out of its
socket.
Turn the socket one-quarter turn
counterclockwise to remove it
from the lens.
Turn on the parking lights and
check that the new bulb is
working.
1. 2. 3. 4. 5.
3. 4. 5. 6.
2.
Replacing a Front Parking L ight Bulb
Lights
Maint enance205
BULB
SOCKET