2003 HONDA ACCORD COUPE engine oil

[x] Cancel search: engine oil

Page 313 of 429

HONDA ACCORD COUPE 2003 CL7 / 7.G Owners Manual Check the f luid level with the
transmission at normal operating
temperature and the car sitting on
level ground. Remove the
transmission f iller bolt and caref ully
f eel inside the bolt hole with yo

Page 315 of 429

HONDA ACCORD COUPE 2003 CL7 / 7.G Owners Manual Pour the f luid to the f iller hole slowly
and caref ully so you do not spill.
Clean up any spills immediately.
Spilled f luid could damage
components in the engine
compartment.
If Honda MTF is not av

Page 323 of 429

HONDA ACCORD COUPE 2003 CL7 / 7.G Owners Manual Install the ignition coil into the
hole.
Connect the wire connector to the
ignition coil. Make sure it locks in
place.
Push the ignition coil down all the
way. Install the bolt.
Repeat this procedure

Page 326 of 429

HONDA ACCORD COUPE 2003 CL7 / 7.G Owners Manual Install the ignition coil. Reinstall
the hexagon socket head cap bolt.
Push the wire connector onto the
ignition coil. Make sure it locks in
place.
Repeat this procedure f or the
other f ive spark plu

Page 332 of 429

HONDA ACCORD COUPE 2003 CL7 / 7.G Owners Manual Run the air conditioning at least once
a week during the cold weather
months. Run it f or at least ten
minutes while you are driving at a
steady speed with the engine at
normal operating temperature.

Page 357 of 429

HONDA ACCORD COUPE 2003 CL7 / 7.G Owners Manual Block the rear wheels.
Fill the f uel tank.
Wash and dry the exterior
completely.
Cleantheinterior.Makesurethe
carpeting, floor mats, etc. are
completely dry.
If you need to park your car f or an
exte

Page 366 of 429

HONDA ACCORD COUPE 2003 CL7 / 7.G Owners Manual This section covers the more-
common problems that motorists
experience with their cars. It gives
you inf ormation about how to saf ely
evaluate the problem and what to do
to correct it. If the proble

Page 382 of 429

HONDA ACCORD COUPE 2003 CL7 / 7.G Owners Manual This indicator should light when the
ignition switch is ON (II), and go out
af ter the engine starts. It should
never come on when the engine is
running. If it starts f lashing, it
indicates that the
Page:   < prev 1-10 9-16 17-24 25-32 33-40 next >