2. Pull the seatback
release lever upward
and pull the seatback
up and fold it down until
it is fiat. Yukon Denali
lever shown,
Yukon
XL Denali
similar.
On the Yukon
XL Denali models, you must first remove
the headrest and store it on the top of the seat
cushion as shown next. Pull the headrest out
from the seatback and slide the
pins into the holes provided in the top of the seat
cushion.
If the seatback cannot fold flat because it interferes with
the cushion, try moving the front seat forward and/or
bringing the front seatback more upright.
1-23
Once the seatbacks are folded down, on
Yukon
XL Denali models only, the rear seat footwell
area will be exposed and will have to be covered by the
load floor panel.
To create a load floor, do the
following:
Returning the Seatbacks to an Upright
Position
1. Release the panels from the seatbacks by pushing
2. Then fold the panels back to cover the rear seat
forward on the latches.
footwell area.
If the seatback isn't
locked, it could move
forward in a sudden stop or crash. That could
cause injury
to the person sitting there. Always
press rearward on the seatback to be sure it
is
locked.
To return the seatbacks to the upright position, do the
following:
1. On Yukon
XL Denali models, lift the load floor
panels and latch them into the seatback.
2. Lift the seatback up and push it rearward all the
way. On Yukon
XL Denali models, move the
headrest to the seatback.
3. Lower the seat cushion until it latches into position.
4. On Yukon Denali models, return the headrests
5. Pull forward on the seatback and up on the seat
to
the upright position.
cushion to make sure the seat
is securely in place.
1-24
