2003 GMC YUKON DENALI fold seats

Rear Seats
Rear Seat Operation
Entering or Exiting the Third Row
Seats
Yukon Qenali: To enter or exit the third row seat you
must fold the second row seat down following the
instructions later in this section. See “Folding the
Seatback” under
60/40 Split Bench Seat on page 7-9.
If you are exiting the third row seat with no assistance
do the following: Be sure
to return the seat to the passenger position
when finished.
Pull forward and push rearward on the
seat to make sure it is locked in place.
Yukon XL Denali: The passenger’s side of the second
row
60/40 or rear bucket seat has an easy entry/exit
feature. This makes it easy
to get in and out of the third
row seat.
To operate the easy entry seat, do the following:
2. Next, push the seatback forward until it is flat
with the floor.
1. Lift the release lever on the back of the seat.
2. Tilt the seatback toward the front of the vehicle and
the seat will release.
1 -i

60/40 Split Bench Seat
If your vehicle has a 60/40 split bench, the seats can be
folded to give you more cargo space.
Folding the Seatbacks (60/40 Split
Bench Seat)
The rear seat may have a 60/40 split seat which may be
folded down to create a load floor and give you more
cargo space. On the Yukon Denali, the rear seatbacks
are equipped with rearward folding head restraints.
When the seatback is being folded down, the head
restraint will automatically fold rearward.
To fold the rear seat, do the following:
1. Make sure that nothing is under or in front
or 'L- seat.
2. Pull up on the strap
loop located at the rear
of the seat cushion
and pull the seat
cushion up. Then fold it
forward.
1 -9

Returning the Seats to an Upright
P--;tion
If the seatback isn’t locked, it could move
forward
in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure
it is
locked.
I I
A safety belt that is improperly routed, not
properly attached, or twisted won’t provide the
protection needed in
a crash. The person
wearing the belt could be seriously injured.
After raising the rear seatback, always check
to be sure that
the safety belts are properly
routed and attached, and are not twisted.
To return the seat to the upright position, do the
following:
1. On Yukon XL Denali models, lift the load floor
panels and latch them into the seatback.
2. Lift the seatback up and push it rearward
all the way.
3. Lower the seat cushion until it latches into position.
4. Pull forward on the seatback and up on
the seat cushion to make sure the seat is
securely in place.
5. On Yukon Denali models, return the head restraints
to the upright position.
6. Check to see that the safety belt buckles on the
driver’s side seat are accessible to the outboard
and center occupants and are not under the
seat cushions.
50/50 Split Bench Seat
If your vehicle has a 50/50 split bench, the seatback(s)
can be folded and the entire seat(s) tilted or removed
from the vehicle.
1-1 1

2. While still holding the lever 3 toward you, grasp the
3. Let go of lever 3 and pull the seat completely down.
4. Push down on the seat firmly. Try pulling it up to
top
of the seat and pull it toward
you slightly.
be sure it is locked into place.
5. Pull up on the release
lever labeled
1 and
then pull up on
the seatback or the
assist strap located on
the outboard side
of
the seat until the
seatback locks into the upright position.
Removing the 50/50 Split Bench Seats
To remove the 50/50 split bench seat, do the following:
1. Open the liftgate.
2. Fold the seatback
forward onto the seat
cushion
by using
the lever labeled
1.
The seat cannot
be removed unless the
seatback is folded.
1-14

Bucket Seats
If your vehicle has bucket seats, the seatbacks can be
reclined and the seats can be folded to give you
more cargo room.
Reclining the Seatbacks
To recline the seatback, do the following:
1 Pull up the lever
located under the seat
cushion. Yukon Denali
lever shown,
Yukon
XL Denali
similar.
Folding the Seatbacks
The seatbacks on the bucket seats may be folded
forward to give you more cargo space.
To fold the seatbacks on the bucket seats, do the
following:
2. Release the lever to lock the seatback where you
want it. Pull the lever again without pushing on the
seatback and the seatback will go
to an upright
position. 1.
Pull up on the strap
loop located at the rear
of the seat cushion
and pull the seat
cushion up and fold it
forward.
1-22

Outside Power Mirrors
The controls are located
on the driver’s door
armrest.
If the mirrors are accidently manually folded in, unfold
them using the mirror controls.
Do not unfold them
manually.
The mirrors also include a memory function which works
in conjunction with the memory seats. See
Memory
Seat on page 2-47 for more information.
Move the upper selector switch
to the left or right to
choose the mirror you want to adjust; then press
the dots located on the four-way control pad to adjust
the mirror.
To fold or unfold the mirrors, move the selector switch,
located above the mirror control,
to the middle
position. The mirror control will illuminate. Press the
right or left side of the mirror control to fold or unfold the
mirrors. You may notice the mirror glass adjust as the
mirrors fold in; this is normal. The mirror glass will
reposition itself once the mirrors are unfolded.
Outside Convex Mirror
Your passenger’s side mirror is convex. A convex
mirror’s surface is curved
so you can see more from the
driver’s seat.
A convex mirror can make things (like other
vehicles) look farther away than they really are.
If you cut too sharply into the right lane, you
could hit a vehicle on your right. Check your
inside mirror or glance over your shoulder
before changing lanes.
2-34

weigh station and weigh your vehicle. Your dealer can If
you put things inside your vehicle - like suitcases,
help you with this. Be sure to spread out your load
tools, packages, or anything else
- they go as fast as
equally on both sides of the centerline.
the vehicle goes.
If you have to stop or turn quickly,
Never exceed the GVWR for your vehicle, or the GAWR
for either the front or rear axle. or
if there
is a crash, they’ll keep going.
And,
if you do have a heavy load, you should
spread it out.
Do no. .Jad ,3ur vehic., any heavier than the
GVWR, or either the maximum front or rear
GAWR. If you do, parts on your vehicle can
break, and
it can change the way your vehicle
handles. These could cause you to lose
control and crash.
Also, overloading can
shorten the life
of your vehicle.
Your warranty does not cover parts or components that
fail because
of overloading.
The label will help you decide how much cargo and
installed equipment your truck can carry.
Using heavier suspension components to get added
durability might not change your weight ratings. Ask your
dealer to help you load your vehicle the right way. Things you put inside your vehicle can strike
and injure people
in a sudden stop or turn, or
in a crash.
Put things in the cargo area of your
vehicle. Try to spread the weight evenly.
0 Never stack heavier things, like suitcases,
inside the vehicle
so that some of them
are above the tops of the seats.
* Don’t leave an unsecured child restraint in
your vehicle.
When you carry something inside the
vehicle, secure
it whenever you can.
Don’t leave a seat folded down unless you
need to.
There’s also important loading information for off-road
driving
in this manual. See “Loading Your Vehicle
for Off-Road Driving” under Operating Your
All-Wheel-Drive Vehicle
Off Paved Roads on page 4-16.
4-45