2003 FORD MUSTANG drain bolt

17.
CAUTION: To prevent damage, do not depress the clutch pedal with the
transmission removed.
Disengage the clutch release cable from the clutch release fork.
18. Remove the clutch cable retainer and remove the clutch cable from the transmission.
19. If transmission disassembly is necessary, drain the transmission fluid.
20. Position a transmission jack and support the transmission.
21. Remove the bolts and the transmission crossmember. Klj . 4 ba
62003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2308/S3B~us~en~ ...

3. Attach the transmission to the special tool.
4.
NOTE: Position a drain pan under the transmission.
Remove the case plug.
5. NOTE: Position the gearshift lever in NEUTRAL.
Remove the bolts and the gearshift lever.
6. CAUTION: Do not attempt to remove the gearshift offset lever with the extension
housing bolted in place. A lug, located on the bottom of the gearshift offset lever,
meshes with the detent plate preventing enough rearward movement of the gearshift
offset lever to allow removal.
Remove the split pin and the gearshift shaft bushing. Klj . 2 ba
112003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2308/S3B~us~en~ ...

SPECIFICATIONS
SECTION 308-
03B: Manual Transaxle/Transmission — TR3650 2003 Mustang Workshop Manual General Specifications
Item Specification
Lubricants and Sealants
Premium Long-
Life Grease
XG -1-C, K or T ESA-
M1C75- B Threadlock and Sealer
E0AZ-
19554- AA WSK-
M2G351- A5 Black Silicone Rubber
D6AZ-
19562- BA ESB-
M4G92- A Pipe Sealant with Teflon®
D8AZ-
19554- A ESR-
M18P7- A Motorcraft MERCON® Multi-Purpose (ATF)
Transmission Fluid
XT -2-QDX MERCON®
Synchronizer
Synchronizer blocking ring to conical face runout 0.5 mm (0.02 in)
End Play
Input shaft end play 0.02286 mm (0.0009 in) -
0.0508 mm
(0.002 in) Countershaft cluster gear end play 0.0 mm (0.0 in) -
0.076 mm (0.003 in) Output shaft end play 0.0012 mm (0.0005 in) -
0.100 mm (0.004
in)
Torque Specifications Description Nm lb-
ft lb-
in Gearshift lever to extension housing bolt 23 13 —
Gear shift lever to gear shift stub shaft bolt 37 27 —
OSS to case bolt 10 — 89
Reverse idler gear bolt 27 20 —
Fifth/reverse lockout bolt 20 15 —
Clutch housing to transmission main case bolt 31 23 —
Extension housing to transmission main case bolt 31 23 —
Drain plug 23 17 —
Reversing lamp switch 37 27 —
Fill plug 17 13 —
Transmission to engine bolt 75 55 —
Engine plate to transmission bolt 27 20 —
Crossmember to frame bolt 41 30 — Klj . 1 ba
22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2308/S3B~us~en~ ...

Transmission Identification
The transmission identification tag is located under the lower bolt that retains the extension housing to
the main case.
The five speed overdrive (TR3650) transmission is available for the Mustang 4.6L (2V).
Transmission Identification 16 7240 Main shift rail
17 7F018 Gearshift offset lever
18 — Spacer
19 — Bearing
20 7210 Gearshift lever
21 — Gearshift plate and spring
22 — Shipping seal
23 7052 Output shaft seal
24 — Extension housing bushing
25 7A039 Extension housing
26 7034 Vent
27 — Vehicle speed sensor (VSS)
28 — Fifth/reverse gear lockout
29 7L027 Magnet
30 7K201 Shift interlock plate
31 7005 Transmission main case
32 — Interlock pins
33 7A010 Drain plug
34 15520 Reverse lamp switch
35 — Detent plug
36 — Detent spring
37 — Detent
38 6392 Clutch housing
39 7B602 Ball stud
40 — Bearing
Part Klj . 6 ba
72003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2308/S3B~us~en~ ...

17. If transmission disassembly is necessary, drain the transmission fluid.
18. Position a transmission jack and support the transmission.
19. Remove the bolts and the transmission crossmember.
20. Remove the bolts. Klj . 4 ba
52003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2308/S3B~us~en~ ...

Guide plate bolts 22 16 —
Reverse lockout solenoid bolt 18 13 —
Drain plug 27 20 —
Reversing lamp switch 27 20 —
Fill plug 27 20 —
Reverse idler shaft bracket bolts 25 18 —
Extension housing bolts 35 26 —
Shift dent cover bolts 20 15 —
Adapter plate plug 27 20 — Klj . 2 ba
22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2308/S3B~us~en~ ...

5. Remove the bolts and the lower gearshift lever.
6. Disconnect the reverse lockout solenoid electrical connector.
7. With the vehicle in NEUTRAL, raise and support the vehicle. For additional information, refer to
Section 100 - 02 .
8. Drain the transmission fluid.
9. CAUTION: Index- mark the driveshaft flange and pinion flange, and the driveshaft Klj . 2 ba
52003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2308/S3B~us~en~ ...

REMOVAL AND INSTALLATION
Fuel Tank
Removal
WARNING: Do not smoke, carry lighted tobacco or an open flame of any type when
working on or near any fuel- related components. Highly flammable mixtures are always present
and may be ignited, possibly resulting in personal injury.
WARNING: Fuel supply lines on all vehicles equipped with fuel injected engines will
remain pressurized for long periods of time after engine shutdown. Fuel system pressure must
be relieved prior to fuel system service to prevent possible personal injury or a fire hazard.
1. Disconnect the battery. For additional information, refer to Section 414 - 01 .
2. Relieve the fuel system pressure. For additional information, refer to Section 310 - 00 .
3. Drain the fuel tank. For additional information, refer to Section 310 - 00 .
4. Raise the vehicle. For additional information, refer to Section 100 - 02 .
5. Remove the filler pipe bolt and disconnect the filler pipe hose connections to the fuel tank.
6. Disconnect the fuel tank electrical connector.
SECTION 310-
01: Fuel Tank and Lines 2003 Mustang Workshop Manual Material
Item Specification
Serfactant
(Merpol)
ESE-
M99B144- B Klj . 1 ba
52003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2308/S3B~us~en~ ...