2003 FORD MUSTANG clutch

42. Remove the center support retaining ring and note location for assembly.
43. Remove the case to planet support spring.
44. Remove the planetary gear support and planetary as an assembly.
45. Remove the reverse clutch band.
46. Remove the retaining ring. Klj . 14 ba
162003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

47. Remove the direct clutch pack.
48. Remove the No. 8 bearing.
49. Remove the output shaft, output shaft ring gear assembly and direct clutch.
50. Remove the No. 9 case rear bearing. Klj . 15 ba
162003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

6 7A100 Main control valve body assembly
7 7E195 Check ball (8 req'd)
8 7H171 Converter drain back valve
9 — Pressure regulator valve (part of 7A100)
10 — Pressure regulator valve spring (part of 7A100)
11 — Regulator boost plunger (part of 7A100)
12 — Regulator boost sleeve (part of 7A100)
13 — Valve retainer (part of 7A100)
14 — Capacity modulator valve (part of 7A100)
15 — Capacity modulator valve spring (part of 7A100)
16 — Spring retaining plate (part of 7A100)
17 — Capacity modulator valve (part of 7A100)
18 — Capacity modulator valve spring (part of 7A100)
19 — Spring retaining plate (part of 7A100)
20 — 3-
4 shift valve (part of 7A100) 21 — 3-
4 shift valve spring (part of 7A100) 22 — Valve retainer plug (part of 7A100)
23 — Valve plug retainer (part of 7A100)
24 — 2-
3 backout valve (part of 7A100) 25 — 2-
3 backout valve spring (part of 7A100) 26 — Spring retaining plate (part of 7A100)
27 — Spring retaining plate (part of 7A100)
28 — Pressure regulator valve spring (part of 7A100)
29 — Pressure regulator valve (part of 7A100)
30 — Control manual valve (part of 7A100)
31 — Retaining ring (part of 7A100)
32 — Solenoid screen
33 — 1-
2 shift valve (part of 7A100) 34 — 2-
3 shift valve spring (part of 7A100) 35 — 2-
3 valve (part of 7A100) 36 — Valve retaining plug (part of 7A100)
37 — Valve plug retainer (part of 7A100)
38 — Spring retaining plate (part of 7A100)
39 — Pressure regulator valve spring (part of 7A100)
40 — Pressure regulator valve (part of 7A100)
41 — Bypass clutch control valve (part of 7A100)
42 — Bypass clutch control valve spring (part of
7A100)
43 — Bypass clutch control valve plunger (part of
7A100)
44 — Bypass clutch control plunger sleeve (part of
7A100) Klj . 2 ba
82003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

1. Remove the torque converter clutch (TCC) solenoid and the shift solenoid.
1. Remove the bolt.
2. Remove the shift solenoid.
3. Remove the TCC solenoid.
2. Remove the two reinforcement plates. 1. Remove the bolts.
2. Remove the plates.
3. Remove the separator plate and discard the gaskets.
4. NOTE: Note the location of the eight coasting booster valve shuttle balls for assembly. Remove the eight coasting booster valve shuttle balls. 45 — Control valve plate (part of 7A100) Klj . 3 ba
82003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
Pump and Intermediate Clutch Piston
Pump and Intermediate Clutch Piston —
Disassembled View
SECTION 307-
01: Automatic Transaxle/Transmission 2003 Mustang Workshop Manual Special Tool(s)
Installer, Front Pump Fluid
Seal
307-
014 (T63L-77837- A) Protector, Piston Seal
307-
339 (T95L-77005- A) Item Part Number Description
1 7902 Torque converter
2 7A248 Front pump O-
ring 3 N605789-S101 Bolt
4 — Pump body assembly
5 N605787-S1000 Front pump support bolt
6 7D014 No. 1 pump support thrust washer
7 7D020 Reverse clutch cylinder seal
8 7D019 Forward clutch cylinder seal
9 7E005 Intermediate clutch piston
10 7F224 Intermediate clutch piston outer seal Klj . 1 ba
72003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

Disassembly
1. Remove the No. 1 selective pump support thrust washer.
2. Remove the front pump support. 1. Remove the bolts.
2. Remove the front pump support.
3. Remove the seal rings. 11 7F225 Intermediate clutch piston inner seal
12 7A108 Pump support
13 — Pump outer gerotor gear
14 — Pump inner gerotor gear
15 7A136 Pump gasket
16 — Pump bushing
17 7A248 Pump inner seal
18 391855-S100 Converter drain plug Klj . 2 ba
72003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

4. Remove the inner and outer pump gerotor gears.
5. Carefully pry spring retainer tabs and remove the spring retainer assembly.
6. Remove the intermediate clutch piston.
7. Remove the clutch piston seals.
1. Remove the intermediate clutch piston outer seal.
2. Remove the intermediate clutch piston inner seal.
8. Remove and discard the front pump seal. Klj . 3 ba
72003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...

Assembly
1. Using the special tool, install the front pump seal assembly.
2. Install the clutch piston seals. 1. Install the intermediate clutch piston outer seal.
2. Install the intermediate clutch piston inner seal.
3. NOTE: Coat the intermediate clutch piston outer seal, inner seal and pump body with petroleum
jelly.
Install the intermediate clutch piston into the special tool. Klj . 4 ba
72003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2748/S3B~us~en~ ...