Page 184 of 216

To reduce the risk of personal injury, make sure the engine is
cool before unscrewing the coolant pressure relief cap. The
cooling system is under pressure; steam and hot liquid can come out
forcefully when the cap is loosened slightly.
1. Before you begin, turn the engine off and let it cool.
2. When the engine is cool, wrap a thick cloth around the coolant
pressure relief cap on the coolant reservoir (an opaque plastic bottle).
Slowly turn cap counterclockwise (left) until pressure begins to release.
3. Step back while the pressure releases.
4. When you are sure that all the pressure has been released, use the
cloth to turn it counterclockwise and remove the cap.
5. Fill the coolant reservoir slowly with the proper coolant mixture (see
above), to within the “cold fill range” or the “cold full” level on the
reservoir. If you removed the radiator cap in an overflow system, fill the
radiator until the coolant is visible and radiator is almost full.
6. Replace the cap. Turn until tightly installed. (Cap must be tightly
installed to prevent coolant loss.)
After any coolant has been added, check the coolant concentration, refer
toChecking Engine Coolantsection. If the concentration is not 50/50
(protection to –34° F/–36° C), drain some coolant and adjust the
concentration. It may take several drains and additions to obtain a 50/50
coolant concentration.
Whenever coolant has been added, the coolant level in the coolant
reservoir should be checked the next few times you drive the vehicle. If
necessary, add enough 50/50 concentration of engine coolant and
distilled water to bring the liquid level to the proper level.
If you have to add more than 1.0 liter (1.0 quart) of engine coolant per
month, have your dealer check the engine cooling system. Your cooling
system may have a leak. Operating an engine with a low level of coolant
can result in engine overheating and possible engine damage.
Recycled engine coolant
Ford Motor Company does NOT recommend the use of recycled engine
coolant in vehicles originally equipped with Motorcraft Premium Gold
Engine Coolant since a Ford-approved recycling process is not yet
available.
Used engine coolant should be disposed of in an appropriate
manner. Follow your community’s regulations and standards for recycling
and disposing of automotive fluids.
2003 P207 Explorer Sport Trac(p27)
Owners Guide (post-2002-fmt)
USA English(fus)
Maintenance and Specifications
184
Page 188 of 216

•You may need to cycle the ignition from off to on several times after
refueling to allow the fuel system to pump the fuel from the tank to
the engine.
•Your “Check Engine” indicator may come on.
Fuel filler cap
When fueling:
1. Turn the engine off.
2. Carefully turn the filler cap counterclockwise 1/8 of a turn until it
stops.
3. Pull to remove the cap.
4. To install the cap, align the tabs on the cap with the notches on the
filler pipe.
5. Turn the filler cap clockwise 1/8 of a turn until it stops.
If the “Check Fuel Cap” indicator
illuminates and stays on after you
start the engine, the cap may not be
properly installed.
If you must replace the fuel
filler cap, replace it with a fuel filler cap that is designed for your
vehicle.
If you do not use the proper fuel filler cap, excessive pressure or
vacuum in the fuel tank may damage the fuel system or cause
the fuel cap to disengage in a collision, which may result in personal
injury.
Fuel filter
Refer to theScheduled Maintenance Guidefor the appropriate
replacement intervals. Replace the fuel filter with an authorized
Motorcraft part.
ESSENTIALS OF GOOD FUEL ECONOMY
We do not recommend taking fuel economy measurements during the
first 1,600 km (1,000 miles) of driving. You will get a more accurate
measurement after 3,000 km - 5,000 km (2,000 miles - 3,000 miles)
Filling the tank
The advertised fuel capacity of the fuel tank on your vehicle is equal to
the rated refill capacity of the fuel tank as listed in theRefill capacities
section of this chapter.
CHECK
FUEL
CAP
2003 P207 Explorer Sport Trac(p27)
Owners Guide (post-2002-fmt)
USA English(fus)
Maintenance and Specifications
188
Page 211 of 216

A
Air bag supplemental
restraint system ..............86–87, 91
and child safety seats ..............88
description ..........................87, 91
disposal ......................................94
driver air bag ......................89, 92
indicator light .....................90, 93
operation .............................89, 92
passenger air bag ...............89, 92
Air cleaner filter .......................200
Anti-lock brake system
(see Brakes) ..............................111
Audio system
Single CD ..................................16
Audio system
(see Radio) ......................16, 19, 23
Automatic transmission ............113
driving an automatic
overdrive .................................115
fluid, refill capacities ..............201
fluid, specification ..................205
Auxiliary power point .................43
Axle
lubricant
specifications ..................203, 205
refill capacities ........................201
traction lok ..............................113
B
Battery .......................................179
acid, treating emergencies .....179
jumping a disabled battery ....152
maintenance-free ....................179
replacement, specifications ...200
servicing ..................................179
BeltMinder ...................................82
Brakes ........................................111anti-lock ...................................111
anti-lock brake system
(ABS) warning light ...............111
fluid, checking and adding ....192
fluid, refill capacities ..............201
fluid, specifications .........203, 205
lubricant specifications ..203, 205
parking ....................................112
shift interlock ..........................113
C
Calculating load ........................127
Capacities for refilling fluids ....201
Cargo cage ...................................55
Cassette tape player ...................16
CD-single premium ...............19, 23
Cell phone use ............................41
Certification Label ....................207
Child safety restraints ................95
child safety belts ......................95
Child safety seats ........................97
attaching with tether straps ..102
in front seat ..............................99
in rear seat ........................99, 101
Cleaning your vehicle
engine compartment ..............169
instrument panel ....................171
interior .....................................171
interior trim ............................171
plastic parts ............................170
safety belts ..............................171
washing ....................................168
waxing .....................................168
wheels ......................................169
wiper blades ............................170
Clock adjust
Single CD ..................................16
2003 P207 Explorer Sport Trac(p27)
Owners Guide (post-2002-fmt)
USA English(fus)
Index
Index
211
Page:
< prev 1-8 9-16 17-24