2003 FORD EXPEDITION remote start

April 2003
Third Printing
Quick Reference2L1J-19G217-ACExpedition
Litho in U.S.A.
Fuel Tank Capacity– Your vehicle’s fuel tank can accommodate 28 gallons of gasoline. Your
vehicle is designed to use "Regular" unleaded gasoline with pump (R+M)/2 octane rating
of 87 for optimum performance. The use of gasoline with lower octane ratings may
degrade performance.
Tire Pressure– Your tire pressure is properly set at the dealership according to the
recommended specifications found on the Certification Label located on the front door
latch pillar on the driver’s side. Please check your tire pressure during routine maintenance
and seasonal changes.
Warning:Improperly inflated tires can affect vehicle handling and
can fail suddenly, possibly resulting in loss of vehicle control.
Fuses– If electrical components in the vehicle are not working, a fuse may have blown. For
more information about changing a fuse, please consult your Owner’s Guide.
Fuel Pump Shut-Off Switch – After a collision, if the engine cranks but does not start, the
fuel pump shut-off switch may have to be reset. The switch is located in the left rear
quarter trim panel, near the liftgate. For complete details on resetting the switch, please
consult your Owner’s Guide.
Changing the Tires– If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly and slowly move to
a safe place on the side of the road. Your vehicle is equipped with a spare tire that may be
used as a spare or a regular tire.
Location of the Spare Tire and Tools
Item Location
Spare Tire Under the vehicle, just forward of the rear bumper
Jack Tools and Under the access panel, located in the floor
Jacking Instructions compartment behind the third row seat
Roadside Emergencies– To fully assist if you should have a vehicle concern, Ford Motor
Company offers a complimentary roadside assistance program. This program is separate
from the New Vehicle Limited Warranty. The service is available: 24 hours, seven days a
week for the Basic Warranty period (Canada) or New Vehicle Limited Warranty period (U.S.)
of three years or 36,000 miles. Roadside assistance will cover:
Changing a flat tire Jump-starts Limited fuel delivery
Lockout assistance Towing of your vehicle
Roadside Assistance Centers
Country Phone Number
United States (800) 241-3673
Canada (800) 665-2006
For complete details on any roadside assistance concern, see the Roadside Emergencies
section, or the Customer Assistance section in your Owner’s Guide.
(if equipped)
For information on other types of radios,
please refer to your Owner’s Guide.
Scan Function– In radio mode, press
to hear a sampling of all listenable
stations. In CD mode, press to hear a
brief sampling of all selections on the
current CD.
Shuffle Function– Press to engage the
desired shuffle mode. SHUFFLE DISC
randomly plays tracks from all CDs;
SHUFFLE TRK plays all selections from
the current CD in random order.
Loading CD– Press to open the CD door,
then load a CD into the player. Press
LOAD and then a preset number to
select a slot. Press and hold LOAD to
activate autoload.
Volume/Power Control – Press the
control to turn the audio system on or
off. Turn the control to raise or lower
volume. The speed sensitive volume
feature automatically adjusts radio
volume in accordance with vehicle speed
to compensate for road and wind noise.
To engage, press and hold the volume
control for five seconds (with the radio
on), then simultaneously press SEL to
choose the compensation level.
AM/FM and CD Select – In radio mode,
press AM/FM to select AM or FM
frequency bands. In CD mode, press
AM/FM to stop play and begin radio play.
To begin CD play while in radio mode,
press the CD control.
Disc/Tune Adjust– In radio mode, press to
move to the next frequency up or down
the band. In CD mode, press to select a
disc in the CD player.
Digital Signal Processing– Press DSP and
then SEL to choose the desired signal
mode (DSP OFF, NEWS, JAZZ CLUB, HALL,
CHURCH, STADIUM).
Seek Function– In radio mode, press to
move to the next listenable station up or
down the band. In CD mode, press to
select the next/previous track on the
current disc.
Setting the Clock– Press MENU until
SELECT HOUR or SELECT MINUTE is
displayed. Press SEL to set the time. Press
MENU again to disengage the clock mode.
Setting Memory Preset Stations– Select
AM, FM1, or FM2 band, then select a
station. Next, press and hold a numbered
control until the sound returns.
A
B
D
C
E
F
I
J
H
G
A
I
J
2003
EXPEDITION
2003
model
Quick Reference Guide
2003 MODEL EXPEDITION QUICK REFERENCE GUIDE
H
F
C
D
E
To open the liftgate glass, push the button
(figure a) under the center of the license plate
lamp shield.
To open the liftgate, place your hand on top of
the liftgate handle (figure b) and pull. Do not
pull the handle from the bottom. To close, make
certain the rear window is closed, and then push
the liftgate closed until it latches securely.
Do not open the liftgate or liftgate glass in a
garage or other enclosed area with a low ceiling.
You can also unlock/lock the liftgate and liftgate
glass using your remote entry system. Folding the Outboard
Seats to a Load Floor Position
To fold the seats to a load floor position, lift
the lever (lever 1) located on the outboard
side of the seat to release the seat back.
Ensure that the seat back is locked in the
down position by applying pressure to it. To
lower the seat further to the full-lowered
position for maximum cargo capacity, locate
the pull strap at the front of the seat, then
pull forward to release the seat into a
kneel-down load floor position. A moderate
force may be required to move the seat
forward and down.
Exiting the Third Row Seat
Pull up on the lever (lever 2) located at the
back of the second row seat. First, the seat
back will fold forward to the cushion, then
the seat will flip forward.
To return the seat to the upright position,
push the seat down and back until it is
latched to the floor. Then, lift the seat back
to the upright position.
(continued)
Folding the 20% Middle Seat (if equipped)
to a Load Floor Position
To fold the seat, pull the release strap
located between the seat cushion and the seat
back to release the folding seat latch. With the
latch released, the seat back can be lowered into
the load floor position.
Before folding the second row seats, ensure that the head restraints are fully lowered
and that all items have been removed from in front of and on the seats.
G
*f2l1j-19g217-ac*
Entering the Third Row Seat
Pull up on the lever (lever 1) located on the side
of either outboard second row seat until the
seat back folds forward to the cushion. Pull up
on the lever (lever 2) located on the back of the
seat. The seat will then flip forward. lever 1
pull straprelease
strap
figure a
figure bReturning the Seats to the Upright Position from the
Full-Lowered Floor Position
The seat back cannot be returned to the upright position
until the seat is returned from the kneel-down position.
To return the seat to the upright position, lift and pull the
seat rearward until the latch is engaged. Do not attempt
to unlatch the rear floor hooks while the seat is in the
kneel-down position.
With the seat in the flat back position, lift up on the
lever (lever 1) located on the side of the seat
cushion. This will allow the seat back to be lifted to
the upright locked position.
lever 1
B
lever 2
Ford Motor CompanyCustomer Relationship Center
16800 Executive Plaza Drive
P.O. Box 6248
Dearborn, MI 48121
1-800-392-3673 (FORD)
(TDD for the hearing impaired: 1-800-232-5952)
This Quick Reference Guide is not intended to replace your vehicle Owner’s
Guide which contains more detailed information concerning the features of
your vehicle, as well as important safety warnings designed to help reduce
the risk of injury to you and your occupants. Please read your entire Owner’s
Guide carefully as you begin learning about your new vehicle and refer to
the appropriate sections when questions arise.
All information contained on this Quick Reference Guide was accurate at the
time of duplication. We reserve the right to change features, operation
and/or functionality of any vehicle specification at any time. Your Ford dealer
is the best source for the most current information.
For detailed operating and safety information, please consult your Owner’s Guide.
CAUTION: DO NOT USE CD WITH ADHESIVE LABEL*
* CDs with adhesive labels and irregularly shaped CDs may get stuck in the CD player. Homemade
CDs should be identified with permanent felt tip marker rather than adhesive labels.