2003 FIAT BARCHETTA gas type

91
IF A BULB
BURNS OUT
You should, where pos-
sible, have your bulbs
changed at a Fiat Dealer-
ship. Correct operation of exter-
nal light beams are essential for
safe driving and compliance with
legal requirements.Only touch the metal
part when handling halo-
gen bulbs. If the transpar-
ent bulb is touched it reduces the
intensity of the light emitted and
can also reduce the life of the
bulb. If you touch the bulb acci-
dentally, rub it with a cloth moist-
ened with alcohol and leave it to
dry.
GENERAL INSTRUCTIONS
– When a light is not working, check
that it has not fused before changing
the bulb.
– For the location of the fuses, re-
fer to “If a fuse blows” in this section.
– Before replacing a bulb that does
not work, check that the contacts are
not oxidised.
– Burnt out bulbs must be replaced
with ones of the same type.
– Always check the height of the
headlight beam after changing a bulb
for safety purposes.
Halogen bulbs contain
pressurised gas which, if
broken, may cause small fragments
of glass to be projected outwards.
WARNING
Modifications or repairs to
the electrical system car-
ried out incorrectly and without
bearing the features of the system
in mind can cause malfunctions
with the risk of fire.
WARNING

117
CHECKING FLUID LEVELS
P5S10059m
Be careful not to mix up
the various types of fluids
when you are topping up:
they are all mutually incompati-
ble and could damage the vehicle.fig. 1 -1. Engine oil - 2. Battery - 3. Brake fluid - 4. Windscreen washer fluid - 5. Engine coolant -
6. Power steering fluid.
Do not smoke while work-
ing in the engine compart-
ment: the presence of flammable
gas and vapour could cause a fire.
WARNING

122
IMPORTANT Brake fluid is hy-
groscopic (meaning it absorbs humid-
ity). This is why the fluid should be
changed more frequently than shown
in the Service Schedule if the car is
mainly driven in areas with a high per-
centage of humidity in the air.AIR CLEANER
REPLACEMENT fig. 7
Unscrew knob A, remove the cap
and pull out the filter element Bto be
replaced.
Have the filter element replaced at
a Fiat Dealership.
fig. 7
P5S00719m
Brake fluid is poisonous
and very corrosive. In the
event of accidental contact, wash
the effected part with water and
mild soap and rinse. If the fluid is
swallowed, call a doctor immedi-
ately.
WARNING
The symbol πon the con-
tainer indicates synthetic
type brake fluid distinguishing it
from the mineral kind. Using min-
eral type fluids damages the special
rubber braking system gaskets be-
yond repair.
WARNING

140
SUSPENSIONS
FRONT
Independent wheel, MacPherson-
type with ferritic cast-iron wishbone
anchored to an auxiliary cross-mem-
ber.
Off-set coil springs and double-action
telescopic gas dampers.
Anti-roll bar.
REAR
Independent wheels with spheroidal
cast-iron wishbones.
Coil springs and gas dampers with
vulcanised bushings.
Anti-roll bar.
Auxiliary rigid H-shaped frame con-
sisting of a tubular cross structure and
two pressed steel long members weld-
ed to it.
STEERING
Energy-absorbing jointed steering
column with rake adjustment system.
Permanently lubricated rack and pin-
ion control.
Hydraulic power steering.
Permanently lubricated joints.
Minimum turning circle: 10.5 metres.
Number of steering wheel turns lock
to lock: approx. 2.5.
WHEEL
GEOMETRY
Wheel toe-in measured from rim to
rim: 0±1 mm.
The figures refer to the car in full
running order.
PERFORMANCE
Maximum speeds after running in, in km/h:
1st2nd3rd 4th5th”Reverse
55 97 143 188 More 55
than 200