2003 CHEVROLET CAVALIER engine

[x] Cancel search: engine

Page 211 of 364

CHEVROLET CAVALIER 2003 3.G Owners Manual Run your engine only as long as you must. This saves
fuel. When you run the engine, make it go a little
faster than just idle. That is, push the accelerator
slightly. This uses less fuel for the heat

Page 216 of 364

CHEVROLET CAVALIER 2003 3.G Owners Manual Towing a Trailer (Automatic
Transaxle)
{CAUTION:
If you dont use the correct equipment and
drive properly, you can lose control when you
pull a trailer. For example, if the trailer is too
heavy, the

Page 217 of 364

CHEVROLET CAVALIER 2003 3.G Owners Manual If You Do Decide To Pull A Trailer
If you do, here are some important points:
·There are many different laws, including speed limit
restrictions, having to do with trailering. Make sure
your rig will

Page 219 of 364

CHEVROLET CAVALIER 2003 3.G Owners Manual Hitches
Its important to have the correct hitch equipment.
Crosswinds, large trucks going by and rough roads are
a few reasons why youll need the right hitch. Here
are some rules to follow:
·The re

Page 221 of 364

CHEVROLET CAVALIER 2003 3.G Owners Manual Driving on Grades
Notice:Do not tow on steep continuous grades
exceeding 6 miles (9.6 km). Extended, higher
than normal engine and transaxle temperatures may
result and damage your vehicle. Frequent s

Page 222 of 364

CHEVROLET CAVALIER 2003 3.G Owners Manual When You Are Ready to Leave After
Parking on a Hill
1. Apply your regular brakes and hold the pedal down
while you:
·start your engine,
·shift into a gear, and
·release the parking brake.
2. Let up

Page 223 of 364

CHEVROLET CAVALIER 2003 3.G Owners Manual Service............................................................5-3
Doing Your Own Service Work.........................5-3
Adding Equipment to the Outside of Your
Vehicle..........................

Page 226 of 364

CHEVROLET CAVALIER 2003 3.G Owners Manual CAUTION: (Continued)
·
Be sure to use the proper nuts, bolts and
other fasteners. ªEnglishº and ªmetricº
fasteners can be easily confused. If you
use the wrong fasteners, parts can later
break or