2003 CADILLAC ESCALADE EXT fuel

[x] Cancel search: fuel

Page 422 of 473

CADILLAC ESCALADE EXT 2003 2.G Owners Manual Normal Maintenance Replacement Parts
Replacement part numbers listed in this section are based on the latest information available at the time of printing,
and are subject to change. If a part listed

Page 424 of 473

CADILLAC ESCALADE EXT 2003 2.G Owners Manual Maintenance Schedule......................................6-2
Introduction...................................................6-2
Your Vehicle and the Environment....................6-2
Maintenance Req

Page 427 of 473

CADILLAC ESCALADE EXT 2003 2.G Owners Manual Part A: Scheduled Maintenance
Services
This part contains engine oil and chassis lubrication
scheduled maintenance which explains the engine oil life
system and how it indicates when to change the
eng

Page 428 of 473

CADILLAC ESCALADE EXT 2003 2.G Owners Manual Scheduled Maintenance
The services shown in this schedule up to 100,000 miles
(166 000 km) should be repeated after 100,000 miles
(166 000 km) at the same intervals for the life of
this vehicle. The s

Page 430 of 473

CADILLAC ESCALADE EXT 2003 2.G Owners Manual 22,500 Miles (37 500 km)
qCheck rear/front axle ¯uid level and add ¯uid as
needed. Check constant velocity joints and axle seals
for leaking.
qRotate tires. See
Tire Inspection and Rotation on
page

Page 431 of 473

CADILLAC ESCALADE EXT 2003 2.G Owners Manual 50,000 Miles (83 000 km)
qChange automatic transmission ¯uid and ®lter if the
vehicles GVWR is over 8600 lbs or if the vehicle is
mainly driven under one or more of these conditions:
þ In heavy ci

Page 432 of 473

CADILLAC ESCALADE EXT 2003 2.G Owners Manual 67,500 Miles (112 500 km)
qCheck rear/front axle ¯uid level and add ¯uid as
needed. Check constant velocity joints and axle seals
for leaking.
qRotate tires. See
Tire Inspection and Rotation on
page

Page 434 of 473

CADILLAC ESCALADE EXT 2003 2.G Owners Manual Part B: Owner Checks and Services
Listed in this part are owner checks and services
which should be performed at the intervals speci®ed to
help ensure the safety, dependability and emission
control p