2003 CADILLAC CTS navigation system

2-100
Navigation/Audio SystemIf you have the optional Navigation system, use the
following to operate the DIC:
INFO (Information): Use this button to access the
Vehicle Information menu that provides the status of
various vehicle systems. See ªVehicle Info (Information)
Menu Navigation Systemº later in this section for more
information.
TUNE/SEL (Select) Knob: See the information listed
previously on this knob. It is equivalent to the
TUNE/SEL knob on the base audio system and is
located in the same place.

: Press the button with this symbol on it when it is
next to a menu item or a prompt on the right side of the
display to select the menu item or acknowledge the
prompt. See ªStatus Menu Item Descriptionsº later in
this section for more information.
Status of Vehicle Systems
You can view the status of several vehicle systems using
the DIC. Depending upon whether or not your vehicle
has the optional Navigation system, the menu items will
vary slightly.

2-102
Vehicle Info (Information) Menu
(Navigation System)
To access the Vehicle Info menu using the Navigation
system, press the INFO button to the left of the screen.
You can also access this menu through the Setup menu.
See ªSetup Menuº in the Index of the Navigation
supplement.
The following submenu appears when Vehicle Info
is selected:

Outside Air Temperature

Trip Odometer A*

Trip Odometer B*

Fuel Range

Average Fuel Economy*

Instantaneous Fuel Economy

Fuel Used*
Average Vehicle Speed*

Timer*

Battery Voltage

Engine Oil Life*

Transmission Fluid Life*
(Automatic Transmission Only)

Blank Display
*These items can be reset. Each one must be reset
individually. For a detailed description of the menu
items and how to reset them, see ªStatus Menu Item
Descriptionsº following.
You can view any of these submenu items at any time by
selecting them using the TUNE/SEL knob. The
currently selected item is displayed at the top of the
screen. Only one item can be displayed at a time.

2-103
Status Menu Item Descriptions
The following paragraphs contain a more detailed
description of each menu item:
BLANK LINE/Blank Display: If you select this item,
nothing is displayed at the top of the screen.
OUTSIDE TEMP/Outside Temperature: If you select
this item, the current outside temperature is displayed at
the top of the screen. It will be in either degrees
Fahrenheit or degrees Celsius depending upon whether
the system is set for English or metric units. If you wish
to change the units, see ªEnglish/Metric Unitsº in the
Index.
MI TRIP A and B/Trip Odometer A and B: For
information on the trip odometers, see ªTrip Odometerº
listed previously in this section.
MPG AVG/Average Fuel Economy: If you select this
item, the approximate average miles per gallon (mpg) or
kilometers per liter (km/L) is displayed. This number is
calculated based on the number of mpg (km/L) recorded
since the last time this menu item was reset.
To reset the MPG AVG using the base audio system,
press the CLR button located in the center of the INFO
button to the right of the screen. The display will return
to zero.To reset the Average Fuel Economy using the
Navigation system, press and hold the multi
-function
button that corresponds to the Reset prompt in the upper
right of the display. The display will return to zero.
MPG INST/Instantaneous Fuel Economy: If you
select this item, the current fuel economy is displayed.
This number reflects only the fuel economy that the
vehicle has right now and will change frequently as
driving conditions change. Unlike average fuel
economy, this menu item cannot be reset.
GAL FUEL USED/Fuel Used: If you select this item,
the number of gallons of fuel used since the last reset of
this menu item is displayed.
To reset GAL FUEL USED using the base audio system,
press the CLR button located in the center of the INFO
button to the right of the screen. The display will return
to zero.
To reset Fuel Used using the Navigation system, press
and hold the multi
-function button that corresponds to
the Reset prompt in the upper right of the display. The
display will return to zero.

2-104
MILES RANGE/Fuel Range: If you select this item,
the approximate number of remaining miles or
kilometers you can drive without refueling is displayed.
This estimate is based on the current driving conditions
and will change if the driving conditions change. For
example, if you are driving in traffic making frequent
stops, the display may read one number, but if you enter
the freeway, the number may change even though you
still have the same amount of gas in the gas tank. This is
because different driving conditions produce different
fuel economies. Generally, freeway driving produces
better fuel economy than city driving.
If your vehicle is low on fuel, the Low Fuel Level
message will be displayed. See ªLow Fuel Level
Messageº in the Index for more information.
AVG MPH/Average Vehicle Speed: If you select this
item, the average speed of the vehicle is displayed in
miles per hour (mph) or kilometers per hour (km/h).
This average is calculated based on the various vehicle
speeds recorded since the last reset of this menu item.
To reset AVG MPH using the base audio system, press
the CLR button located in the center of the INFO button
to the right of the screen. The display will return to zero.To reset the Average Vehicle Speed using the Navigation
system, press and hold the multi
-function button that
corresponds to the Reset prompt in the upper right of the
display. The display will return to zero.
TIMER/Timer: If you select this item, a timing feature
is displayed. The timer functions like a stopwatch in that
you can record the time it takes to travel from one point
to another.
To use the timer, you must first turn it on. To turn on the
timer using the base audio system, press the CLR button
located in the center of the INFO button to the right of
the screen once. To turn on the timer using the
Navigation system, press the multi
-function button next
to the On/Off menu item in the upper right of the
display. The display for both systems will read 00:00:00
TIMER ON and begin counting.
Press the button(s) again to turn the timer off. When the
timer is off, the display will show the timer value and
TIMER OFF. The timing feature will stop.
To reset the timer using the base audio system, turn off
the timer and then press and hold the CLR button. The
display will return to zero.
To reset the timer using the Navigation system press and hold
the multi
-function button next to the Reset prompt in the
upper right of the display. The display will return to zero.

2-106
DIC Messages
These messages will appear if there is a problem sensed
in one of your vehicle's systems. The text messages are
the same for both the base audio and Navigation systems
unless otherwise indicated. The symbols, however,
appear only on the Navigation system display.
You must acknowledge a message to clear it from the
screen for further use. To clear a message, do one of the
following:

Using the Base audio system, press CLR.

Using the Navigation system, press the
multi
-function button next to the OK prompt.
Be sure to take any message that appears on the screen
seriously and remember that clearing the message will
only make the message disappear, not the problem.Battery Not Charging
This symbol appears
with the Battery Not
Charging message.
When this message appears on the display, there is a
problem with the generator and battery charging
systems. Have the electrical system checked by your
dealer as soon as possible.

2-107
Battery Saver Active
This symbol appears
with the Battery Saver
Active message.
This message appears when the system detects that the
battery voltage is dropping beyond a reasonable level.
The battery saver system will start reducing certain
features of the vehicle that you may not be able to
notice. At the point that the features are disabled, this
message is displayed. It means that the vehicle is trying
to save the charge in the battery.
Turn off all unnecessary accessories to allow the battery
to recharge.
The normal battery voltage range is 11.5 to 15.5 volts.
You can monitor battery voltage on the DIC by pressing
the INFO button until you find BATTERY VOLTS
(base audio system) or by selecting Battery Voltage
from the Vehicle Info menu (Navigation system).Battery Voltage HighThis symbol appears
with the Battery Voltage
High message.
This message indicates that the electrical charging
system is overcharging the battery. When the system
detects that the battery voltage is above approximately
16 volts, this message will be displayed.
To reduce the charging overload, use the vehicle's
accessories. Turn on the exterior lamps and radio, set the
climate control on AUTO and the fan speed on the
highest setting, and turn the rear window defogger on.
The normal battery voltage range is 11.5 to 15.5 volts
when the engine is running. You can monitor battery
voltage on the DIC by pressing the INFO button until
you find BATTERY VOLTS (base audio system) or by
selecting Battery Voltage from the Vehicle Info menu
(Navigation system).

2-108
Battery Voltage Low
This symbol appears
with the Battery Voltage
Low message.
This message will appear when the electrical system
is charging less than 10 volts or if the battery has
been drained.
If this message appears immediately after starting, it is
possible that the generator can still recharge the battery.
The battery should recharge while driving but may take
a few hours to do so. Consider using an auxiliary
charger (be sure to follow the manufacturer's
instructions) to boost the battery after returning home or
to a final destination.
If this message appears while driving or after starting
your vehicle and stays on, have it checked immediately
to determine the cause of this problem.
To help the generator recharge the battery quickly, you
can reduce the load on the electrical system by turning
off the accessories.The normal battery voltage range is 11.5 to 15.5 volts.
You can monitor battery voltage on the DIC by pressing
the INFO button until you find BATTERY VOLTS
(base audio system) or by selecting Battery Voltage
from the Vehicle Info menu (Navigation system).
Change Engine Oil
This symbol appears
with the Change Engine
Oil message.
This message indicates that the life of the engine oil has
expired and it should be changed within 200 miles. See
ªEngine Oilº in the Index for more information.
When you reset the Change Engine Oil message by
clearing it from the display, you still must reset the
engine oil life monitor separately. For more information
on resetting the engine oil life monitor, see ªOil Life
Monitor, How to Resetº in the Index.

2-115
Passenger Door Ajar
This symbol appears
with the Passenger Door
Ajar message.
When this message appears on the display, it means
that the passenger's side front door was not closed
completely. You should make sure that the door is
closed completely.Personalization Off/Driver Identification
(Navigation System Only)
This symbol appears
with the Personalization
Off message.
When this message appears, the personalization features
previously stored are turned off. If you want your
customized settings to be automatically recalled when
you use the remote keyless entry transmitter or when
you remove the key from the ignition, you must enable
them in the DIC. See ªVehicle Programming and
Personalization Featuresº later in this section for more
information.
This message is also used to identify the
driver (1, 2 or 3) on the Navigation system.