11
4
General information and controls
1Clutch lever (b28)
2 Stowage compartment
3 Stowage-compartment rail
4 Seat lock (
b14)
5 Wheel nut, rear wheel 6
Toolkit
Funnel for engine oil
Adapter
from w/f 27 mm (1.06 in) to
w/f 55 mm (2.17 in) for rear
wheel
7 Coolant reservoir
(
b42)
8 Cover insert, left (
b42)
( ) Figure in bracketsbpage number for
description
General view, left side
1234
8765
10K14bkg2.book Seite 4 Montag, 15. September 2003 5:30 17
11
8
General information and controls
KeysYou will receive two master
keys and one spare key.
The key number is on the
accompanying plastic tag.
L Note:
The ignition switch and steering
lock, fuel filler cap, stowage
compartment
OA and the seat
lock are all operated with the
same key.
OAOptional accessory
Ignition switch and steering lock
10K14bkg2.book Seite 8 Montag, 15. September 2003 5:30 17
111
15
General information and controls
Softbag
Softbag for stowage
compartment, inserting/
securing
e Attention:
Max. load in stowage compart-
ment 5 kg (approx. 11 lbs)
Make sure the softbag is cor-
rectly fastened.
Prop the motorcycle on its
side stand
– Make sure the ground is level and firm. Insert the softbag into the
stowage compartment as
illustrated
Pass loops 2 through the
stowage-compartment rail at
positions B, C and through
the cover at position A
Engage in hook 1
C
B
A
1
2
10K14bkg2.book Seite 15 Montag, 15. September 2003 5:30 17
111
17
General information and controls
SoftbagOA
• Lay the softbag on the rear seat with the zip fastener
toward the rear
Thread front straps 4 through
loops 3 on left and right, pull
the straps taut and secure
them
Loop rear straps 5 on left and
right around the luggage car-
rier (arrow) as illustrated
Engage buckle 2 and pull the
strap taut Removal is the reverse of the
installation procedure
OAOptional accessory
2
54
3
10K1401g2.fm Seite 17 Montag, 29. September 2003 4:09 16
1
43
Safety check
2
Topping up the coolant
level
e Attention:
The coolant level must be be-
tween the MIN and MAX marks.
Never overfill the expansion
tank.
Take care not to damage cover
insert 2 when removing.
Prop the motorcycle on its side stand
As illustrated, take a full- handed grip of cover insert 2
Without tilting the cover insert, pull it straight toward your
body as indicated by the arrow Open cap
3 of the expansion
tank
Top up with coolant of the
correct specification
(
b Maintenance Instructions,
Chapter 3)
L Note:
Engine cold: do not top up past
the MIN mark
Hold the motorcycle upright and recheck the coolant level;
correct if necessary
Reinstall the cap on the expansion tank
Reinstall cover insert 2
Coolant
MAX
2
3
MIN
10K14bkg2.book Seite 43 Montag, 15. September 2003 5:30 17
ii
80
Index
SSafety check, 21, 22
Safety instructionsCatalytic converter, 51
Safety instructions, braking, 62, 63
Seat, 14
Service worldwide, 71
Shock-absorber adjustment, 37
Softbag, 15, 16, 17
Softbag for stowage compartment, inserting/
securing, 15
Speedometer, 6
Spring preload, 36 Front wheel, 36
Starter pushbutton, 13
Starting, 57
Switch on the ignition, 56
TTank cap, 26
Telltale and warning lights, 6 ABS, 7, 58
Coolant temperature, 7, 58
Engine oil pressure, 7, 59
Flashing turn indicator, left, 7
High-beam headlight, 7
Low fuel level, 7, 59
Neutral, 7
Tread depth, tyres, 38
Tripmeter reset button, 6 Type plate, 5
Tyres
Running in, 55
Tread depth, 38
Tyre pressures, 39
WWarning lightLow fuel level, 59
Warning lights ABS, 7, 58
Coolant temperature, 7, 58
Engine oil pressure, 59
Low fuel level, 7
S – Z
10K14bkg2.book Seite 80 Montag, 15. September 2003 5:30 17
