17-11-2003
Ð Following selection of a functionfrom the menu, the sub-menu
appears on the right-hand side of
the display .
Ð The values corresponding to each of the functions of the sub-menu appear opposite on the left-hand
side of the display .
YOUR BOXER IN DETAIL 51
Pull-down menu This is the menu associated with the application in use at the base of the
display. When the menu consists of several pages, access to the next page isby selecting the "Other menus"
function.
Parameter configuration Commands & Setup menu The "Commands & Setup" menu
provides access to the following gen- eral parameters:
Ð "Setup": choice of day/night bright- ness, display colours, voice/text message language and distanceunit,
Ð "Fleet Management": configuration of the automatic vehicle locationSMS messages,
Ð "Speed Limit Warning": setting, activation and display of exceedingof the permitted speed,
Ð "Modem": activation/deactivation of the communication between thesystem's modem and the laptop.
YOUR BOXER IN DETAIL
52
Setup The "Day brightness" and "Night
brightness" functions enable you to
set day and night brightness values
independently. The "Colours" function controls dis-
playing on the day or night setting or changes the setting automatically inrelation to the light in the passengercompartment or switching on of thelights. The "Voice language" and "Text
language" functions enable you to
choose the language for voice recog- nition and SMS messages (Italian,German, English, Spanish, French,Portuguese, Dutch). The "Distance unit" function
enables you to choose the distance unit for the trip computer calculations(km or miles). Note: to choose the language and
the distance unit, insert the configu- ration CD-Rom. Fleet Management The
"Fleet Management" function
permits locating of the vehicle by means of the automatic transmissionof SMS messages to a control centre.
To have the SMS messages sent, you must:
Ð activate the "Sending mode" function,
Ð select a type of interval in the "Event mode" function,
Ð set the duration of the interval in the "Data frequency send" function,
Ð enter the registration number in the "Vehicle ID" function,
Ð enter the telephone number of the control centre in the "Telephone number" function,
Ð insert the SIM card.
Speed Limit Warning The "Speed Limit Warning" func-
tion enables you to monitor the speed of the vehicle.
To enable the system to detect an excessive speed and warn you ofthis, you must:
Ð activate the "Alarm" function,
Ð set the permitted speed in the "Speed Limit" function,
Ð activate the "Buzzer" function.
17-11-2003
