2003.5 Peugeot 307 buttons


YOUR 307 IN DETAIL63
Using the alphanumeric keypad
=

 
2

#


 








% 


#



"




 
 %  Installing the SIM card 6# 
#
L"
#




#


# 




# 



#


"
88
2




  #

# 2


 



#

2






# Note:  






8



"

 

  


.+
)  #




 



 
Buttons Associated characters
[1] 1 or space
[2] 2 or A B C 2 or a b c 2
[3] 3 or D E F 3 or d e f 3
[4] 4 or G H I 4 or g h i 4
[5] 5 or J K L 5 or j k l 5
[6] 6 or M N O 6 or m n o 6
[7] 7 or P Q R S 7 or p q r s 7
[8] 8 or T U V 8 or t u v 8
[9] 9 or W X Y Z 9 or w x y z 9
[0] 0 or + (long press)
[#] # or validation
[*] * or erasing of last character input (long press)

29-09-2003
YOUR 307 IN DETAIL77
The most recent destinations are shown. There are three possible methods of defining the location to which youwish to travel:
– accept the last details input by means of the "OK"function,
– input the details of your destination,
– automatically input the details of your current location by means of the "Curr. loc." function.
GPS details
The last address entered is displayed. There are three options for defining the location in which you wish to obtain thisservice:
– accept the last address entered
using the "OK"function,
– fill in the "Town"and "Road" zones,
– automatically enter the name of your current location using the
"Curr. loc." function.
Selecting a service If you wish to be directed to a service, select the
categorycorresponding
to the service, then confirm by pressing the dial. The list of services corresponding to the category selected is displayed. Select the servicethen confirm by
pressing the dial to access the "Choice of a location" function.
An indication on the edge of the screen (x/n) shows you the maximum number ofestablishments providing the same ser-vice within a radius of 30 miles (50 km), asthe crow flies, from the selected location. Use buttons "<"and ">"to consult the
list provided.When the establishment of your choice is displayed, you can:
 select the "OK"function to acti-
vate guidance towards this service,
 select the "Store"function to enter
this establishment in your directory.
Note:
if the service selected is not avail-
able in the programmed location, a temporary message informs you of this. Following validation of the location, the service closest to it is displayed.The distance indicated is the distanceas the crow flies from the service tothe selected location.

29-09-2003
YOUR 307 IN DETAIL
138
Selecting the function 
Place switch 1in the LIMIT posi-
tion. The limiter is not yet active. By default the display indicates:
Switching the function off  Place switch 1in position 0or
CRUISE or switch off the ignition to
switch the system off. The last speed programmed remains in the
memory.
Memorising a speed
A speed can be memorised without
activation of the limiter.
A brief press on buttons 2and 3
decreases or increases by 1 mph
(1 km/h). An extended press decreas-es or increases the memorised speed
progressively.
Activation/deactivation of thelimiter
Pressing button 4activates the lim-
iter, pressing this button again deac-tivates it. When the limiter is active, the display indicates (e.g. at 80 mph (130 km/h)):
CRUISE CONTROL/SPEED LIMITER* Limiter function:
this prevents the
vehicle speed exceeding the speed programmed by the driver (minimumspeed of 20 mph (30 km/h)). The operations must be carried out with the engine running.
* During the year, according to engine.
Exceeding the programmed speed Pressing the accelerator to exceed the programmed speed will have no
effect unless the pedal is pressedfirmly (passing the point of resis-
tance) .
The limiter is deactivated temporarily and
displays (e.g. at 80 mph (130 km/h)):
To re-activate the limiter, release the accelerator to slow down to a speedbelow the programmed speed. Note: sometimes (on a steep
descent), the limiter may not prevent the vehicle from exceeding the pro-grammed speed, this speed flashes. Operating check In the event of a limiter malfunction, the memorised speed is erased, thedashes flash for a few seconds:
Contact a PEUGEOT dealer to have the system checked.