Page 113 of 195
%&!#&!%##"
YOUR 307 IN DETAIL
108
THE SUNROOF 9to partially open the roof:
.
!
4
9 to open the roof completely:
.
!
4
9 to close it completely:
"O"
9 safety auto-reverse: -
Notes:
+
!
9
."
4
9
!
9
.
4
!
$
9
"O"
!
!
9
The safety auto-reverse functionis not active during these opera-tions. Always remove the key from the ignition whenleaving the vehicle, evenfor a short time.
In the event of contact during operation of the roof, you mustreverse the movement of the roof.
To do this, press the switch con-cerned. When the driver operates the roof switch, he must ensure that noone is preventing correct closingof the roof. The driver must ensure that the passengers use the sunroof cor-
rectly. Be aware of children when ope- rating the roof.
Page 118 of 195
%&!#&!%##"
After the ignition has been switched off, if the stalk was in awipe position, you must reactivatethis function:
9
9
8
Special position of the front windscreen wiper
!
.5
=
! /
=4
!
Windscreen wash
YOUR 307 IN DETAIL
112
WINDSCREEN WIPER STALK
Front windscreen wiper with intermittent wipe
2
.4
1 >
.
4
I
0 *
5
.
4
I
!
!
Front windscreen wiper withautomatic wipe
2
.4
1 >
.
4
AUTO +
0 *
5
.
4
AUTO
Page 119 of 195
%&!#&!%##"
YOUR 307 IN DETAIL113
Rear windscreen wiper
A
Rear windscreen wash A
Automatic timed windscreen wipers
AUTO
!
adapt their speed to the inten-
sity of the rainfall
Operating check Activation
-
"Automatic windscreen
wiping active"
!
Deactivation
<
In the event of malfunction
"Auto
windscreen wiper faulty"
!
AUTO
!
!
/
'()'*
Do not cover the rain sen-sor located on the wind-screen behind the interior
mirror.
When using an automatic carwash, switch off the ignition orcheck that the wiper control is notin the automatic position. In winter, it is advisable to wait for
the windscreen to completelyclear of ice before operating theautomatic wipe.
Page 125 of 195

29-09-2003
YOUR 307 IN DETAIL117
ELECTRIC WINDOWS
1 - Driver's electric window switch.
2 - Passenger's electric window switch.
3 - Rear right electric window switch.
4 - Rear left electric window switch.
5 - Disarming of the rear electric window switches (child lock).
Y
Manual operation:
'
# )
REINITIALISATION OF THE WINDOWS
7
#
#=
,
#
The safety auto-reverse function is not active during these operations.
Automatic operation:
'
#
#
'
Note:
,
#>?
(
#
)
Safety auto-reverse
!
#
Note:
%
,
&
#
#
6
,
#
The safety auto-reverse function is not active during these operations. Disarming the rear window controls
7
##
5
!
!
Always remove the key from the ignition when leaving the vehicle, evenfor a short time.
In the event of contact during operation of the windows, youmust reverse the movement of the
window. To do this, press the switch concerned. When the driver operates the pas- senger electric window switches,he must ensure that no one is preventing correct closing of thewindows. The driver must ensure that the passengers use the electric
windows correctly. Be aware of children when operating the windows.
Page 142 of 195

29-09-2003
TRACTION CONTROL (ASR)
AND DYNAMIC STABILITY
CONTROL (ESP) These systems are linked and com-
plement the ABS.
The ASR system optimises drive to prevent the wheels skidding, by act-ing on the brakes of the drive wheelsand on the engine. It also allows thedirectional stability of the vehicle tobe improved on acceleration. If there is a variation between the tra- jectory followed by the vehicle and
that required by the driver, the ESPsystem automatically acts on theengine and the brake of one or morewheels, in order to put the vehicleback on course.Operating check
When a malfunction of thesystems occurs, the switchlight flashes and the warninglight comes on, accompa-nied by an audible signal
and the message "ESP/ASR not
functioning" on the multifunction
display.
Contact a PEUGEOT dealer to have the system checked.
YOUR 307 IN DETAIL
134
Disarming the ASR/ESP systems In exceptional conditions (starting a vehicle which is bogged down, stuck
in snow, on soft ground, ...), it may
be advisable to disarm the ASR and
ESP systems, so that the wheels canmove freely and regain grip.
Press the "ESP OFF" switch,
located on the central section of the fascia.
The switch lights up and thewarning light comes on: the
ASR and ESP systems aredisarmed.
These are triggered again: automatically if the ignition is
switched off,
automatically above 30 mph (50 km/h),
manually by pressing the switchagain.
Operation of the ASR and ESP systems
The warning light flashes if
the ASR or ESP is activated.
The ESP/ASR systems offer exceptional safety innormal driving, but thisshould not encourage thedriver to take extra risks
or drive at high speed. The correct functioning of these systems depends on observationof the manufacturer's recommen-dations regarding the wheels (tyresand rims), the braking components,the electronic components, and thePEUGEOT assembly and opera-tion procedures. After an impact, have the system
checked by a PEUGEOT dealer.
Page 143 of 195

29-09-2003
CRUISE CONTROL Cruise control enables the vehicle to maintain a steady speed pro-
grammed by the driver, regardless ofthe road characteristics and withoutthe driver having to touch the accelera-tor or brake pedals. In order for it to be memorised, the vehicle speed must be greater than25 mph (40 km/h) (manual gearbox)or 40 mph (60 km/h) (automaticgearbox) and fourth gear at leastmust be engaged (second gear forthe automatic gearbox).Operation
Place switch 1in the ONposition.
A speed can be memorised. Place switch 1in the OFFposi-
tion to cancel.
Memorising a speed As soon as you reach the chosen speed, press button 2or 3. This
memorises the speed, which will be
maintained automatically. Note: It is possible to accelerate and
drive momentarily at a speed greater than the memorised speed. Whenthe accelerator pedal is released, thevehicle will return to the memorisedspeed.
Cancelling the memorised speed If you wish to cancel the memorised speed: press button 4or the brake or
clutch pedal. Recalling the memorised speed After cancellation, press button
4.
Your vehicle will return to the last memorised speed. Changing a memorised speed
To memorise a speed higher than the previous one: press button 3;
release it when you have reached the required speed.
To memorise a speed lower than theprevious one: appuyez sur la touche 2;
release it when you have reached the required speed.
Cancelling the cruise control Place switch 1in the OFFposi-
tion or switch off the ignition.
YOUR 307 IN DETAIL 135
Do not use cruise control on slippery roads or inheavy traffic.
Page 145 of 195

29-09-2003
YOUR 307 IN DETAIL137
Changing a memorised speed
To memorise a speed higher than the previous one, there are twooptions: Without using the accelerator: press button 3;
A brief press increases by 1 mph (1 km/h). An extended press increases the
memorised speed progressively. Using the accelerator: exceed the memorised speed until the required speed isreached,
press button 2or 3.
To memorise a speed lower than theprevious one: press button 2
A brief press decreases by 1 mph
(1 km/h). An extended press decreases
the memorised speed progressively. Cancelling the memorised speed Place switch 1in position 0or
LIMIT or switch off the ignition. Operating check In the event of a cruise control mal- function, the memorised speed iserased, the dashes flash for a fewseconds:
Contact a PEUGEOT dealer to have the system checked. Note:
the appearance of this display is
normal if the memorising conditions are not met.
Do not use cruise control on slippery roads or inheavy traffic.
Page 146 of 195

29-09-2003
YOUR 307 IN DETAIL
138
Selecting the function
Place switch 1in the LIMIT posi-
tion. The limiter is not yet active. By default the display indicates:
Switching the function off Place switch 1in position 0or
CRUISE or switch off the ignition to
switch the system off. The last speed programmed remains in the
memory.
Memorising a speed
A speed can be memorised without
activation of the limiter.
A brief press on buttons 2and 3
decreases or increases by 1 mph
(1 km/h). An extended press decreas-es or increases the memorised speed
progressively.
Activation/deactivation of thelimiter
Pressing button 4activates the lim-
iter, pressing this button again deac-tivates it. When the limiter is active, the display indicates (e.g. at 80 mph (130 km/h)):
CRUISE CONTROL/SPEED LIMITER* Limiter function:
this prevents the
vehicle speed exceeding the speed programmed by the driver (minimumspeed of 20 mph (30 km/h)). The operations must be carried out with the engine running.
* During the year, according to engine.
Exceeding the programmed speed Pressing the accelerator to exceed the programmed speed will have no
effect unless the pedal is pressedfirmly (passing the point of resis-
tance) .
The limiter is deactivated temporarily and
displays (e.g. at 80 mph (130 km/h)):
To re-activate the limiter, release the accelerator to slow down to a speedbelow the programmed speed. Note: sometimes (on a steep
descent), the limiter may not prevent the vehicle from exceeding the pro-grammed speed, this speed flashes. Operating check In the event of a limiter malfunction, the memorised speed is erased, thedashes flash for a few seconds:
Contact a PEUGEOT dealer to have the system checked.