2003.5 Peugeot 307 Break Dag display

29-09-2003
The contextual menu associated with the 0
$
+
&0 application
appears as a superimposed display,when this is the application currently in
use in the main screen window. This menu is limited to the following functions:
– changing of the initial route (entering of a diversion),
– switching to "Selection-Movement on map" mode*,
– storing of the current location (postal address if available or, if it is not, the GPS co-ordinates),
– changing of the route calculation criteria,
– stopping or resuming of guidance (displaying of the message whichchanges depending on the previ-ous status).





 
A
0
$
+
&0
&E
'&
*
"
..
& $&
*)&(


..
.' This function enables you to receive
messages regarding the traffic
conditions (accidents, traffic jams,
weather, ...). They may appear temporarily as a superimposed display or be read by
the voice synthesiser, if it is active.
In map mode*, special TMC symbols are displayed depending on the typeof information. Select the
0



..
.'+
0 function on the 0
&&' 0
menu, you can choose: – "Consult the messages",
– "Filter the TMC info":
 in relation to a route, if guidanceis in progress,
 in relation to a type of event,
 around a location and/or the vehicle,
– "Voice synthesiser",
– "Activate/Deactivate traffic info".
* DT colour screen only.

29-09-2003





 A,
&&
&

)&
010 11F The 010 application has two
display modes:
G 0&)&
.7$

'10 mode, representing active guid-
ance on the map on the right and a large-scale view of the next inter-section on the left,
G 0&&+&'&

'10 mode, representing consultation ofthe map on the right and a compasson the left.
To switch from one mode to the
other, press the dial on the right
briefly, then select the 0&
)&
'10 or 0E
'1
'&0 function.
In 0&&+'&'&

'10
mode, you can see symbols, repre-senting the various types of serviceswhich exist, sorted by category: – "Administration and safety" symbol on a grey background,
– "Hotels, bars and restaurants" symbol on a yellow background,
– "Other businesses" symbol on a purple background,
– "Culture, tourism and entertainment" symbol on a white background,
– "Sports centres and open air centres" symbol on a green background,
– "Transporation and automobiles" symbol on a blue background. A
0H'0 function enables you to
enlarge the map, in accordance with the thirteen preset levels relating tothe following scales:
– 50 m/cm, 100 m/cm, 150 m/cm, 200 m/cm, 500 m/cm,
– 1 km/cm, 2 km/cm, 5 km/cm,– 10 km/cm, 20 km/cm, 50 km/cm,– 100 km/cm, 200 km/cm.This is achieved by turning the dial. This mode permits:
– displaying of the vehicle on the map with the route proposed by the navigation if the guidance isactive,
– zooming in on the map in accor- dance with the thirteen preset lev-
els,
– displaying of the 0
$
+
&0 contextual menu.
0&)&
.7$

'10
'&
This mode permits:
– selection of any point on the map
to obtain guidance towards it or to obtain information about it (postal
address if available or, if it is not,GPS co-ordinates),
– movement on the map by means of the four directional arrows, rep-resenting the four cardinal points
(North, East, South, West),
– zooming in on the map in accor- dance with the thirteen preset lev-
els,
– displaying of the 010contextual
menu.
* DT colour screen only.
0&&+&'&

'10'&

29-09-2003





 
A
From the $&&
'& , the main
010 menu offers various options
for guidance management:
– switching to "Selection-Movement on map" mode,
– direction of the map towards the North or in the direction of the vehicle,
– recentering of the map around the vehicle,
– opening of the services selection window visible on the map, such as hotels, service stations, etc.
– displaying of the window for ente- ring the description for recording
the current position of the vehiclein a directory file.
1
The contextual menu associated with the
010 application and with the
0&&+&'&

'10mode appears as a superimposed dis-
play, when these are in use in the
main screen window. This menu is limited to the following functions:
– displaying of the information on the location selected on the map,
– selection of a location on the map as a destination,
– storing of the location selected (postal address if available or, if it is not, GPS co-ordinates, so thatthey can be recorded in a directoryfile),
– switching to "Vehicle following on map" mode.
010
&E
'&

29-09-2003
sport programme
snow programme
 ark to  
 the vehicle or



 ,
with the handbrake on or off.
 everse to 
 (select this function with the vehicle
stationary, engine at idle).  eutral to



 and to 
, with the
handbrake on. 
if function is engaged inadvertently while
driving, allow the engine to return to idle before engaging function to accelerate.
 rive for  in automatic mode.
 anual for  in manual mode.



!"# $
%

&&
With the engine running, to move off from position :
 
















'


(
 select function ,  or , then
gradually release the pressureon the brake pedal; the vehicle
moves off immediately.
You can also move off from position :
 release the handbrake, with yourfoot on the brake,
 select function ,  or , then
gradually release the pressureon the brake pedal; the vehicle
moves off immediately.
)# * When the engine is at idle, brakes not applied, if function ,  or is select-
ed the vehicle moves even withoutthe accelerator being pressed. For this reason, 



+ ,

-
-




+ (
.


- .
When maintenance operations needto be carried out with the engine run-ning, apply the handbrake and selectposition .
/01!
" " 0
"!/
#"#" 0
*!#23














 




 










 








 



   
*


 +

  Move the lever in the gate to select a function. Once the function is selected, the corresponding indicator light appears on
the instrument panel display.

29-09-2003
#-
+

 Automatic changing of the &-


:
 select function in the gate.
The gearbox always selects the most suitable gear according to the follow-ing parameters:
– the style of driving,
– the road profile,
– the vehicle load. The gearbox is then operating in auto-adaptive mode, without anyaction on your part.
)# * Never select function when the
vehicle is moving. Never select functions or unless
the vehicle is stationary.Never change between functions to optimise braking on a slippery surface. 
For immediate maximum accelera-
tion without touching the gear lever,press the accelerator pedal down as
far as it will go (kickdown). The gear-box will automatically change downor maintain the gear selected untilmaximum engine speed is reached. When braking, the gearbox will auto- matically change down in order to
provide efficient engine braking. If you take your foot off the accelera-
tor suddenly, the gearbox will notchange to a higher gear for reasons
of safety.




.

 In addition to the auto-adaptive pro- gramme, there are two special pro-grammes. The programme is displayed on the instrument panel screen.


  Press button once the vehicle
has been started and function 
selected.
The gearbox automatically favours sporty driving and more dynamicacceleration.
.

 This programme improves starting
and drive when traction is poor.  Press button once the vehicle
has been started and function 
selected.
The gearbox adapts to driving on slippery roads. 
you can return to the auto-
adaptive programme at any time.  Press button or again to
switch off the programme you are in. 
-


 Manual changing of the
&-


:
 select function in the gate,
 push the lever to the 4sign to
change to a higher gear,
 pull the lever to the 5sign to
change to a lower gear.
You can change from position 
(driving in automatic mode) to posi- tion (driving in manual mode) at
any time.  It is only possible to change from one gear to another if the vehicle speedand engine speed permit. If they donot, the vehicle will operate tem-porarily in automatic mode. When the vehicle is stationary or
moving very slowly, the gearboxautomatically selects gear %.
Programme (sport) and (snow)
do not operate in manual mode.



!"# $ %%

29-09-2003
 
 Pull on the handle and press the button to release the handbrake.Illumination of this warninglight and of the "warning
light, accompanied by anaudible signal (while thevehicle is being driven) and
the message /


/ on
the multi-function display, indicatesthat the handbrake is still on or hasnot been properly released.




6
Any operating abnormality is indicat- ed by an audible signal, accompa-nied by the message /#-
+


&
- / on the multi-function dis-
play, /5/and flashing of the Sport
and Snow warning lights on theinstrument panel. In this situation the gearbox operates in downgrade mode (locked in 3rd
gear). You may feel a substantialknock when changing from to 
and from to (this will not cause
any damage to the gearbox). Do not exceed 60 mph (100 km/h), keeping within the limit of localspeed restrictions.
Contact a PEUGEOT dealer as soon as possible. 1#2#7! # 6 Pull the handbrake to immobilise your vehicle. 
  




























!"# $
%8














 






 






 

29-09-2003
 
 Pull on the handle and press the button to release the handbrake.Illumination of this warninglight and of the "warning
light, accompanied by anaudible signal (while thevehicle is being driven) and
the message /


/ on
the multi-function display, indicatesthat the handbrake is still on or hasnot been properly released.




6
Any operating abnormality is indicat- ed by an audible signal, accompa-nied by the message /#-
+


&
- / on the multi-function dis-
play, /5/and flashing of the Sport
and Snow warning lights on theinstrument panel. In this situation the gearbox operates in downgrade mode (locked in 3rd
gear). You may feel a substantialknock when changing from to 
and from to (this will not cause
any damage to the gearbox). Do not exceed 60 mph (100 km/h), keeping within the limit of localspeed restrictions.
Contact a PEUGEOT dealer as soon as possible. 1#2#7! # 6 Pull the handbrake to immobilise your vehicle. 
  




























!"# $
%8














 






 






 

29-09-2003
"#0" 
0"$ 9#:
#
# 0
"#2 $ "
0"$ 9!: These systems are linked and com-
plement the ABS.
The ASR system optimises drive to prevent the wheels skidding, by act-ing on the brakes of the drive wheelsand on the engine. It also allows thedirectional stability of the vehicle tobe improved on acceleration. If there is a variation between the tra- jectory followed by the vehicle and
that required by the driver, the ESPsystem automatically acts on theengine and the brake of one or morewheels, in order to put the vehicleback on course.

++
When a malfunction of thesystems occurs, the switchlight flashes and the warninglight comes on, accompa-nied by an audible signal
and the message /!>#

&-+/ on the multifunction
display.
Contact a PEUGEOT dealer to have the system checked.



!"# $
%?



#>!
6

In exceptional conditions (starting a vehicle which is bogged down, stuck
in snow, on soft ground, ...), it may
be advisable to disarm the ASR and
ESP systems, so that the wheels canmove freely and regain grip. 
Press the /! ;;/ switch,
located on the central section of the fascia.
The switch lights up and thewarning light comes on: the
ASR and ESP systems aredisarmed.
"






  automatically if the ignition is
switched off,
 automatically above 30 mph (50 km/h),
 manually by pressing the switchagain.


&

#


!
6


The warning light flashes if
the ASR or ESP is activated.

 !"#
 























 











 
 



 





$






%

 &




 


 



'()









 
"







 




'()