Page 107 of 342
5-15
EBU00493Final gear oil
Make sure the final gear oil is at the specified
level. Add oil as necessary. (See pages 8-19 ~
8-21 for details.)
If desired, an SAE 80W90 hypoid gear oil may
be used for all conditions.NOTE
GL-4 is a quality and additive rating, GL-5 or
GL-6 rated hypoid gear oils may also be used.
Recommended oil:
SAE 80 API GL-4 Hypoid gear oilOil quantity:
Periodic oil change: 0.8 L
Total amount: 0.95 L
5TH-9-60 4~5 9/25/01 4:23 PM Page 40
Page 253 of 342
8-17
7. Fill the engine with oil and install the dip-
stick.cCBe sure no foreign material enters the
crankcase.8. Warm up the engine for several minutes at
idle speed. Check for oil leakage while
warming up.cCIf oil leakage is found, stop the engine imme-
diately and check for the cause.
Recommended oil: See page 10-2.
Oil quantity:
Periodic oil change:
0.8 L
Total amount:
0.95 L
5TH-9-60 8 9/25/01 5:50 PM Page 8-17
Page 324 of 342
10-2
10
MODEL YFM80W
Engine oil:
Type
Recommended engine oil classification: API Service SE, SF, SG type or higher
Quantity:
Periodic oil change 0.80 L
Total amount0.95 L
cCBe sure to use motor oils that do not contain
anti-friction modifiers. Passenger car motor
oils (often labeled “ENERGY CONSERVINGII”) contain anti-friction additives which will
cause clutch and/or starter clutch slippage,
resulting in reduced component life and poor
engine performance.
–20° 10° 20° 30° 40°
10W30
10W40
20W40
20W5050°C
0° –10°
5W30
15W40
5TH-9-60 9~ 9/25/01 4:28 PM Page 309