2002 YAMAHA KODIAK 400 warning light

EBU00015
1-CONTENTS
LOCATION OF THE WARNING AND
SPECIFICATION LABELS ...................... 1-1
SAFETY INFORMATION ......................... 2-1
DESCRIPTION AND MACHINE
IDENTIFICATION ................................... 3-1
Identification number records .............. 3-3
Key identification number .................... 3-5
Vehicle identification number ............... 3-7
Model label ........................................... 3-9
CONTROL FUNCTIONS ........................ 4-1
Main switch .......................................... 4-1
Indicator lights ..................................... 4-3
Coolant temperature warning light
checking method ............................... 4-7
Speedometer ..................................... 4-11
Fuel gauge ........................................ 4-13
Handlebar switches ........................... 4-15
Throttle lever ..................................... 4-21
Speed limiter ..................................... 4-23
Front brake lever ............................... 4-25
Rear brake pedal and lever ............... 4-27
1234
Drive select lever .............................. 4-29
Recoil starter ..................................... 4-29
Fuel tank cap .................................... 4-31
Fuel cock ........................................... 4-33
Starter (choke) “” .......................... 4-35
Seat ................................................... 4-37
Storage box ....................................... 4-39
Front carrier ...................................... 4-39
Rear carrier ....................................... 4-39
Front shock absorber adjustment ..... 4-41
Rear shock absorber adjustment ...... 4-45
Auxiliary DC jack ............................... 4-49
PRE-OPERATION CHECKS .................. 5-1
Front and rear brakes ......................... 5-7
Fuel .................................................... 5-11
Engine oil ........................................... 5-15
Final gear oil ..................................... 5-19
Differential gear oil ............................ 5-21
Throttle lever ..................................... 5-21
Fittings and Fasteners ...................... 5-21
Lights ................................................ 5-23
Switches............................................. 5-23
5
U5GH62.book Page 1 Monday, August 6, 2001 9:09 AM

2-15
WARNING


Always turn off the engine when refueling.


Do not refuel right after the engine has
been running and is still very hot.


Do not spill gasoline on the engine or ex-
haust pipe/muffler when refueling. Never
refuel while smoking, or while in the vicini-
ty of sparks, open flames, or other sources
of ignition such as the pilot lights of water
heaters and clothes dryers. Gasoline can
catch fire and you could be burned.


When transporting the machine in another
vehicle, be sure it is kept upright and that
the fuel cock is in the “OFF” position. Oth-
erwise, fuel may leak out of the carburetor
or fuel tank.


Gasoline is poisonous. If you should swal-
low some gasoline or inhale a lot of gaso-
line vapor, or get some gasoline in your
eyes, see your doctor immediately. If gaso-
line spills on your skin, wash with soap
and water. If gasoline spills on your cloth-
ing, change your clothes.
U5GH62.book Page 15 Monday, August 6, 2001 9:09 AM

4-3 1. Park indicator light “P”
2. Reverse indicator light “R”
3. Neutral indicator light “N”
4. Coolant temperature warning light “”
5. Four-wheel-drive indicator light “”
1Témoin de stationnement “P”
2. Témoin de marche arrière “R”
3. Témoin de point mort “N”
4. Témoin d’avertissement de la température du liquide de
refroidissement “”
5. Témoin 4x4 “”
1 Luz de indicatora de estacionamiento “P”
2. Luz de control de marcha atrás “R”
3. Luz de control de punto muerto “N”
4. Luz de aviso de la temperatura del refrigerante “”
5. Luz de control del modo de tracción de cuatro
ruedas “”
EBU00043
Indicator lights
EBU00609
Park indicator light “P”
This indicator light comes on when the drive select
lever is in the “P” (park) position.
EBU00602
Reverse indicator light “R”
This indicator light comes on when the transmis-
sion is in reverse.
EBU00603
Neutral indicator light “N”
This indicator light comes on when the transmis-
sion is in neutral.
EBU00713
Coolant temperature warning light “”
When the coolant temperature reaches a specified
level, this light comes on to warn that the coolant
temperature is too hot. If the light comes on during
operation, stop the engine as soon as it is safe to
do so and allow the engine to cool down for about
10 minutes.
U5GH62.book Page 3 Monday, August 6, 2001 9:09 AM

4-5
The coolant temperature warning light circuit can
be checked according to the procedure on page
4-7.CAUTION:

The engine may overheat if the ATV is
overloaded. If this happens, reduce the
load to specification.


Restart after making sure that the light is
out. Continuous use while the light is on
may cause damage to the engine.
EBU00605
Four-wheel-drive indicator light “”
This indicator light comes on when the 2WD/4WD
switch is in the 4WD position.NOTE:Due to the synchronizing mechanism in the differ-
ential gear case, the light may not come on until
the ATV starts moving.
U5GH62.book Page 5 Monday, August 6, 2001 9:09 AM

4-7
EBU00714
Coolant temperature warning light checking method
ACB-09E
Turn the main switch to “ON” and the
engine stop switch to “”.
Coolant temperature warning
light does not come on.
Coolant temperature
warning light comes on.
Coolant temperature
warning light does not
come on.
Coolant temperature and
electrical circuit are OK. Go
ahead with riding.
Push the start switch with the
transmission in the neutral position.
Ask a Yamaha dealer to
inspect the electrical circuit.
Coolant temperature
warning light comes on
momentarily.
U5GH62.book Page 7 Monday, August 6, 2001 9:09 AM

4-29 1. Drive select lever
1. Levier de présélection
1. Palanca de selección de marcha
1. Recoil starter
1. Lanceur à réenroulement
1. Arranque por tracción de cable
EBU00608
Drive select lever
The drive select lever is used to shift your machine
into the low, high, neutral, reverse and park posi-
tions. (Refer to pages 6-11 ~ 6-15 for the drive se-
lect lever operation.)
EBU00667
Recoil starter
Firmly grasp the handle and pull slightly until en-
gagement can be felt. Then pull forcefully, being
careful not to pull the rope all the way out.
WARNING
Shift the transmission in neutral or set the shift
lever to the park position before starting the
engine or the ATV could start to move unex-
pectedly, which could cause an accident.
U5GH62.book Page 29 Monday, August 6, 2001 9:09 AM

8-121 1. Headlight fuse
2. Ignition fuse
3. Auxiliary DC jack fuse
4. Four-wheel-drive fuse
5. Signal fuse
6. Spare fuse (× 3)
1. Fusible de phare
2. Fusible d’allumage
3. Fusible de prise pour accessoires
4. Fusible du système 4x4
5. Fusible de signalisation
6. Fusible de rechange (× 3)
1. Fusible del faro
2. Fusible del sistema de encendido
3. Fusible de la toma de CC auxiliar
4. Fusible del sistema de tracción en las cuatro ruedas
5. Fusible señalización
6. Fusible de repuesto (× 3)
WARNING
Always use a fuse of the specified rating. Nev-
er use any type of material or object in place of
the proper fuse. An improper fuse can cause
damage to the electrical system which could
lead to a fire.CAUTION:
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.
U5GH62.book Page 121 Monday, August 6, 2001 9:09 AM

8-125 1. Bulb holder
1. Fixation d’ampoule
1. Portabombillas
3. Unhook the bulb holder spring and remove
the defective bulb.
WARNING
The headlight bulb is hot when it is on and im-
mediately after it is turned off. Wait for the bulb
to cool down before touching or removing it.
You can be burned, or a fire could start if the
bulb touches something flammable. 4. Put a new bulb into position and secure it in
place with the bulb holder spring.
5. Install the bulb holder cover.
U5GH62.book Page 125 Monday, August 6, 2001 9:09 AM