2002 YAMAHA BANSHEE 350 brake pads

5-7
3. Brake fluid leakage
Check to see if any brake fluid is leaking
out of the pipe joints or master cylinder.
Apply the brakes firmly for one minute. If
there is any leaking, have the machine
inspected by a Yamaha dealer.
4. Brake operation
Test the brakes at slow speed after starting
out to make sure they are working properly.
If the brakes do not provide proper braking
performance, inspect the brake pads for
wear. (See page 8-73.)
5FK-9-63-4~5 2/7/02 1:25 PM Page 42

8-7
EBU00262PERIODIC MAINTENANCE/LUBRICATION
INITIAL EVERY
ITEM ROUTINE 1 3 6 6 1
month months months months year
Transmission9Replace oil.2222
9Check coolant leakage.
Cooling system9Repair if necessary.22222
9Replace coolant every 24 months.
9Check condition.
Spark plug9Adjust gap and clean.22222
9Replace if necessary.
Air filter9Clean. Every 20 ~ 40 hours.
9Replace if necessary. (More often in wet or dusty areas)
* Carburetor9Check idle speed / starter operation.
2222
9Adjust if necessary.
* Crankcase breather9Check breather hose for cracks or damage.
222
system9Replace if necessary.
9Check for leakage.
* Exhaust system9Retighten if necessary.222
9Replace gasket(s) if necessary.
* Fuel line9Check fuel hose for cracks or damage.
222
9Replace if necessary.
Throttle operation9Inspect and adjust free play if necessary.22222
* Front and rear9Check operation/fluid leakage/see NOTE Page 8-9.
22222
brake operation9Correct if necessary.
* Front and rear9Check pad wear.
222
brake pads9Replace if necessary.
5FK-9-63-8 2/7/02 1:28 PM Page 8

8-73
EBU00309Front and rear brake pad inspection
Each brake pad is provided with a wear indica-
tor. The indicators allow checking of brake pad
wear without disassembling the brake. Apply the
brake and inspect the wear indicators. If they
are ALMOST in contact with the disc plate, ask
a Yamaha dealer to replace the pads.
q
a
q
q
a
1. Wear indicator (×2) a. Wear limit 1.0 mm1. Indicateur d’usure (×2) a. Limite d’usure 1,0 mm1. Inidcador de desgaste (×2) a. Límite de desgaste 1,0 mm
1. Wear indicator (×2) a. Wear limit 1.0 mm1. Indicateur d’usure (×2) a. Limite d’usure 1,0 mm1. Inidcador de desgaste (×2) a. Límite de desgaste 1,0 mm FrontAvantDelanteroRearArrièreTrasero
5FK-9-63-8 2/7/02 1:28 PM Page 74

8-83
EBU00338Rear brake adjustmentNOTE:
Adjust the rear brake before inspecting the rear
brake pads.Pedal height adjustment
The top of the brake pedal should be positioned
10 mm below the top of the footrest. If not, ask a
Yamaha dealer to adjust it.wOperating with improperly serviced or
adjusted brakes could cause loss of braking
ability, which could lead to an accident.
After servicing:
8Make sure the brakes operate smoothly
and that the free play is correct.
8Make sure the brakes do not drag.
8Make sure the brakes are not spongy. All
air must be bled from the brake system.
Replacement of brake components requires
professional knowledge. These procedures
should be performed by a Yamaha dealer.
a
a. 10 mm
5FK-9-63-8 2/7/02 1:28 PM Page 84