Page 260 of 474
AND EQUIPMENT 
Cruise 
For your driving  comfort  the cruise  control 
system 
can be  used  to keep  the vehicle 
speed  constant  beginning  at about 
mph 
do  not  come with the  button 8 and  the posit ion for the switch A on 
the  turn  signal 
lever-see page  24. 
Switching the system on 
Slide  switch A to 
When  the cruise  control system  is switched 
on  an  indicator  light in the  instrument  panel 
will  light 
up. 
Now you can  take  your  foot 
oH the gas  pedal. 
- Increase  the speed  using  the accelerator 
pedal.  When  the pedal  is released,  the 
system  continues 
to control  the  vehicle 
at  the  speed  previously  set. 
- This  will not occur 
if the set speed  is 
Press the bottom part of button 8 (-) to 
reduce  the speed. 
- By  briefly  pressing  the 
bottom part of 
button 8 H. you  reduce  the speed in stages. 
the speed of 
the  vehicle  at that time is the new speed 
that  is stored. 
-
the  button  is  released  below approxi
mately  22 mph 
km/h). 
104-------------- ----- 
     
        
        Page 397 of 474

Radio 
1-
Press  the button  to turn  the unit 
Whatever  was playing when the unit  was 
last  turned 
off-radio,  cassette  or automatically  come back on when  the unit 
is  turned on again. 
The  following  settin gs  are  also  saved  when 
you  turn  off the  system: 
- Radio:  the frequency  setting 
-
the  selected cassette  track 
-
player:  the recently  played track 
The  unit turn 
off automatically  when you 
move  the key  from  the igntion  lock. 
The  radio  can be turned 
on while  the igntion 
key  is removed by simply  pressing  button 1. 
turn off again  automatically 
peated as often as desired . 
Turn the  knob  to adjust  the volume. 
Setting the turn-on 
Turn-on 
The  volume  setting when the unit  is turned 
on  is the  same as it  was  when  the unit  was turned  off. 
the Dolby®  button 
(12, see page  1 
hea r a  signal tone,  and appear  in the  display. 
The  volume  level is represented  by a 
The Speed  Volume 
Press the Dolby® button (12) again. 
Press  the Dolby ® button (12) again  for 
longer  than 3 seconds  to confirm  the 
tings  you've  just made. 
automatically  return 
to  the  normal  operation  mode after about 
the custom  turn-on  volume that you 
stored  is louder  than the turn-off volume 
level,  the unit  will use  the 
turn-off volume 
the  next  time  it's turned  on.  
     
        
        Page 400 of 474
6 -Manual tuning 
Use  this  button  to 
ing the  5 second period,  the feature  will stop  there. 
7  -Station preset buttons 
FM1 and FM2. 
Select  the desired  band 
Tune to the  desired  radio station  (see 5 or 6). 
Hold down  the station  button until  you 
hear 
an audible  signal. The sound first 
be  muted  and then  return. 
the currently  displayed  frequency