Page 55 of 474
Service at 
see page 5 for explanation. 
Engine: Change  oil and  oil filter 
Next Service: 
Date: 
................. ....... . 
M i
les/ km: ................... . 
whichever  occurs first  
     
        
        Page 316 of 474
Engine oil 
Specifications and viscosity 
Your engine was factory 
season  high that has a vis
cosity  grade of SAE 
driving. between changes  use any high 
you can use SAE 
To assure  that the 
terms must appear  on the 
or 
-
Service SJ 
-83 or 84 
-
Service or 
and 
meets  the standards 
of the proper 
A. The  starburst 
Another identification B be 
added 
to the 
the  correct 
1 - The top  portion  indicates the 
by designations. 
2 - The  center  portion 
shows the 
has saving 
Note 
Look for one of these 
38 ----------------- 
     
        
        Page 324 of 474
Changing brake 
The brake 
the water  content  in  the  brake  fluid is too corrosion  in t he  brake  system  may re
sult  after a  period 
of time.  The boiling  point of the brake  fluid will also  decrease erably. 
Therefore, the brake 
Because of the problem of proper disposal of brake fluid along 
with the special tools required and the necessary expertise, we recommend that you have your brake fluid 
changed by your VOLKSWAGEN 
dealer. 
is advisable to have  the fluid  changed  dur
ing  a Maintenance  Service. 
reservoir.  
     
        
        Page 342 of 474
AND 
Tire wear 
The original  tires on your veh icle  have  built
in wear  indicators.  They are molded  into  the 
bottom of the tread  grooves  and appear as approximately 1 
a triangle 
or  other  symbols)  show 
the locations of the 
wear indicators . 
When  the indicators  appear in 
two or more 
adjacent 
t he  tires  wear  down  this far. Worn tires  canno t grip  the road  surfac e 
sudden deflation and loss of vehicle control. 
hicle may tend to hydroplane 
sooner. 
Wheel Bolts 
The wheel bolts must always be clean and easy to turn when you're 
removing or installing them. Never oil or lubricate wheel bolts. 
Check the wheel bolts whenever you change a 
ginal factory installed equipment 
will adversely affect the safe ation of your vehicle and may cau-se an accident and personal injury. 
me loose and cause an accident 
during vehicle operation! Extremely high torques can dama-ge the wheel bolts and/or their threads. 
64-----------------WHAT  
     
        
        Page 410 of 474
Removing 
Turn the magazine  over and hold  it with 
the 
Rotate  the release  lever against  the spring 
force. 
Gent ly  press  the 
Remove  the 
which are clean 
and  free of scratches or any other  type of damage. 
Do not stick  any labels  on a 
Always  store 
in direct sunshine. 
Cleaning your 
For routine  cleaning,  wipe the playing  sur
face 
with a  clean,  soft, lint-free  cloth from 
the  center of the disc to the outer  edge. 
the surface  is heavily  soiled, dampen  a 
clean  soft cloth in a solution of mild  neutral 
commercial  detergent before cleaning the disc. 
Never use 
changer  conforms 
to  safety  class 1. 
The laser  used in 
THE