2002 TOYOTA COROLLA Fluid

[x] Cancel search: Fluid

Page 207 of 260

TOYOTA COROLLA 2002 E120 / 9.G Owners Manual ’02 Corolla U (L/O 0105)
2032002 Corolla_U (OM12743U)
Power steering fluid level
Check the level through the reservoir. The
level should be in the “HOT” or “COLD”
range depending on the flui

Page 210 of 260

TOYOTA COROLLA 2002 E120 / 9.G Owners Manual ’02 Corolla U (L/O 0105)
2062002 Corolla_U (OM12743U)
1. Power steering fluid reservoir
2. Engine oil level dipstick
3. Engine oil filler  cap
4. Brake fluid reservoir
5. Fuse blocks
6. Battery
7. E

Page 212 of 260

TOYOTA COROLLA 2002 E120 / 9.G Owners Manual ’02 Corolla U (L/O 0105)
2082002 Corolla_U (OM12743U)
If you perform maintenance by yourself,
be sure to follow the correct procedure
given in this section.
You should be aware that improper or in-

Page 213 of 260

TOYOTA COROLLA 2002 E120 / 9.G Owners Manual ’02 Corolla U (L/O 0105)
2092002 Corolla_U (OM12743U)
Be extremely cautious when work-
ing on the battery. It contains poi-
sonous and corrosive sulfuric acid.
Warning: Battery posts, terminals
an

Page 215 of 260

TOYOTA COROLLA 2002 E120 / 9.G Owners Manual ’02 Corolla U (L/O 0105)
2112002 Corolla_U (OM12743U)
Checking brake fluid
Parts (if level is low):
SAE J1703 or FMVSS No.116 DOT 3
brake fluid
Tools:
Rag or paper towel
Funnel (only for adding f

Page 217 of 260

TOYOTA COROLLA 2002 E120 / 9.G Owners Manual ’02 Corolla U (L/O 0105)
2132002 Corolla_U (OM12743U)
DO�IT�YOURSELF MAINTENANCE
Engine and Chassis
Checking the engine oil level214
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Page 220 of 260

TOYOTA COROLLA 2002 E120 / 9.G Owners Manual ’02 Corolla U (L/O 0105)
2162002 Corolla_U (OM12743U)
CAUTION
To prevent burning yourself, do not
remove the radiator cap when the en-
gine is hot.
Coolant type selection
Use of improper coolants ma

Page 221 of 260

TOYOTA COROLLA 2002 E120 / 9.G Owners Manual ’02 Corolla U (L/O 0105)
2172002 Corolla_U (OM12743U)
To check the fluid level, simply look at
the see�through reservoir. The level
should be between the “MAX” and
“MIN” lines on the reservo
Page:   < prev 1-8 9-16 17-24 next >