2002 Peugeot 607 Dag service

YOUR 607 IN DETAIL67
Sending a mini message
Note: Before typing your first message, check that your SMS service centre number i s correctly stored in the submenu
'SMS parameters' .
If it is not correctly stored, any message you have typed before in putting this number will be deleted and not sent.
In the 'SMS' menu, confirm the 'Send new message' function with the 'OK' button.
Input your message with the alphanumerical keypad and confirm it with the 'OK'button, then enter the number of the recip
ient or select it from the list and confirm with the 'OK' button.
Then confirm the 'Send message'or 'Store message' function with the 'OK' button.
For sending multiple messages, the 'Store message'function allows you to reuse an existing message, to delay send ing
a message, to modify a message and to send it with the 'Send the message' function.
Description of menus
'PHONEBOOK'
Find by name: gives you access to a stored name, a telephone number and allow s you to erase information. The search
may be carried out either by scrolling through the list or by inp utting the first letter of the name being searched for and con
firming it.
Find by address: enables you to erase information and gives you access to a stored name and number by inputting the
memory number and confirming it.
New entry: this allows you to add a name and telephone number to the directory.
'SMS'
Received messages: allows you to access the old messages received.
Sending a message: allows you to key in and send short messages.
Stored messages: allows you to access and send old messages.
SMS setting: allows you to allocate to a message the service centre number (supp lied by the network operator), an 'E Mail,
fax or messenger' (network service) type detail, duration of validit y, etc.

The control pad
This lets you select and confirm the functions, controls and programmes dis
played. It is located by the side of the screen.
Dial; this has two functions:
– Rotation of the dial:This allows you to move roundthe screen and thus select a
function.
It also allows you: – with a 'setting' type parameter, after selection, to increase
or decrease the value,
– with a 'list'type parameter, to open the list and scroll
through the values.
– Pressing the dial:
This allows:
– confirmation of the selected function or the modified value.
– selection of a 'setting' or 'list' type parameter for modifica
tion.
– cancelling of a superimposed display.
'MENU' button:
This allows access at any time to the general menu.
'MODE' button:
– brief press: – monochrome screen C: selection of functions (audio sys
tem, navigation / guidance...),
– colour screen: access to the list of controls (context menu)
of the function being displayed.
– Pressing for more than two seconds puts the screen on standby.
'ESC' button:
– brief press: cancelling of operation in progress and return to the
previous screen or erasing of a superimposed display.
– pressing for more than two seconds returns to the welcome screen. 71
SATELLITE NAVIGATION
SYSTEM
Introduction
The satellite navigation system
guides you, by means of vocal and
visual instructions (graphics), to
your chosen destination.
The heart of the system lies in the
use of a map data base and GPS
(Global Positioning System). With
this system you can fix the position
of your vehicle by means of a satel
lite network.
The system uses the following ele
ments:
– the control pad,
– the CDROM drive,
– the last voice message and route change recall control,
– the map data in CDROM format,
– the monochrome or colour screen.
Certain functions or services
described may vary depending
on the version of CDROM or the
country where the vehicle is sold.
YOUR 607 IN DETAIL

YOUR 607 IN DETAIL
74
Main menu
Switch on the ignition.
Press the 'Menu'button to access the ' Main menu'.
Select a function by turning the dial, then confirm (press
the dial). The
''Navigation/Guidance'' menu offers various possibil
ities for activating guidance:
– by inputting the address of a new destination,
– by selecting a service (hotel, station, airport...) available in a town,
– by selecting an address stored in one of the two directo ries,
– by resuming previously interrupted guidance, Two messages may be displayed, depending on the pre
vious action: 'Resume guidance' or 'Stop guidance'.
Navigation / guidance
Following selection of the 'Navigation / guidance'menu,
a screen warns you about the use of the navigation sys
tem. Please observe the instructions.
Press the dial to access the next screen.

YOUR 607 IN DETAIL
77
Selecting a service
The last destination address input is displayed.
There are 3 ways of defining the location in which you wish
to obtain a service:
– repeat the last address input using the'Validate'func
tion,
– input the name of a new town then input the street (o r the
'Town Centre' function), using the 'Change'function,
– automatically input your current location by means of the 'Current location' function.
After validating the address, scroll through the list of ser
vices by turning the dial, then press the dial to select one
of them.
Note:if the service selected is not available at the pro
grammed location, a message (by means of a superim
posed display) will indicate this.
The cursor on the lefthand side of the screen indicates
your position in the list.
The address of the service required is displayed.
Information on the righthand side of the screen (e.g. 1/50)
indicates whether there are several establishments (50
maximum) within a radius of 30 miles (50km) of the
address selected, as the crow flies.
Use the ' Next'or 'Previous' functions to consult the list
offered.
When the establishment of your choice is displayed, select
the 'Validate' function, then press the dial. If necessary,
select a guidance criterion.
Guidance begins, follow the instructions.

Access a list by the selecting the
"List"function when inputting the
town or road. Select a name then
confirm.
Select a name then confirm.
When the required information has
been given, confirm so that you can
go on to the next.
YOUR 607 IN DETAIL
82
Selecting a destination
The menu ''Selecting a destina
tion'' offers various ways for reach
ing a destination:
– by inputting an address (country, area...),
– by selecting a service (airport, hotel, restaurant, bank),
– GPS details,
– most recent destinations,
– personal directory,
– professional directory.
General operation
When the details are completed for
one of the above options, you can:
– confirm to start guidance,
– store the address of the destina tion in one of the two directories
(see Paragraph 'Personal/ Profes
sional directory'),
– press the 'ESC' key to finish
inputting modifications. Inputting an address
The last guidance address input is
displayed.
To input a new address, complete
the following details: the country, the
area, the road and the road number.
For each of these, select each letter
using the dial, then confirm each
time.
If an error is made while inputting,
the
'Correct' function allows the last
letter input to be cleared.

YOUR 607 IN DETAIL
83
Selecting a service
To select a service: • select the location. The last destination appears; you can
change it,
replace it with the current location, by confirmation of the corresponding button),
• select 'OK'to look at the list of services for the type and
location selected,
• select a type of service from the list (hotel, service sta tion, restaurant etc.)
• select 'OK' to activate guidance towards the service
selected. GPS details
Input the details of your destination location (longitude
and
latitude shown in degrees, minutes and seconds) to acti
vate guidance to this location.
Most recent destinations
With the dial, select the destination required from the li st,
then confirm.
Personal /Professional directory
Select one of the two directories to choose a destination
address from the list.

Map configuration
This function offers various possibilities to optimise and
enhance the display of the route:
– map orientation,
– type of services displayed,
– selection of scale.
Map orientation
This function allows orientation of the map to be selected:
North or according to the direction of the vehicle.
Note: the "vehicle orientation" option is only active if the
display scale is less than or equal to 1km.
Types of services displayed
This function allows the required service to be displayed.
From the list presented, select the service(s) required (for
insertion), the service(s) not required (for deletion), or
choose 'Any'(parking, hotel, restaurant, service station,
cinema...).
Changing the route
This function allows you, for example, to avoid a tailback
on the route which has been worked out.
Using the 'Navigation/Guidance' context menu, or by
holding down the last voice message recall control, you
can introduce a change to the route that had been worked
out, at any time during guidance.
This change occurs on the stretch between your present
position and a point located at a distance which has to b e
input, using the initial route.
Enter a distance between 1 and 10 km, using the alphanu
meric keypad, then confirm.
The system takes this change into account and suggests
new guidance, having invalidated the section selected. Details of the route
At all times during guidance, the submenu
'Details of the
route' gives you access to the following functions:
– destination selected,
– see the places to be travelled through (display of roads, streets and towns to be passed),
– see the route on the map (change to map display).
A pointer located on the side indicates your position in rela
tion to the route.
Geographical information
The submenu 'Geographical information' presents the
GPS information regarding the position of the vehicle.
YOUR 607 IN DETAIL
85

PRACTICAL INFORMATION
138
CHECK
...
Battery
At the start of winter, have your bat
tery checked by a PEUGEOT dealer.
Air filter and pollen filter
Have the filter elements replaced
regularly. If you drive in dusty con
ditions, change them twice as
often.
Particulate emission filter
Additive reservoir (Diesel
models)
It is essential the particulate emis
sion filter be maintained and the
additive reservoir be filled by a PEU
GEOT dealer, according to the man
ufacturer's servicing schedule.
Brake pads
Brake pad wear depends on the
style of driving, in particular for vehi
cles which are used in town, over
short distances . It may be neces
sary to check the thickness of the
pads, even between services. Handbrake
Where the handbrake travel is too
great or there is a reduction in the
performance of the system, the
handbrake should be adjusted, even
between services. Have the system
checked by a PEUGEOT dealer.
Manual gearbox
This does not need an oil change.
Check the level, according to the
manufacturer's servicing schedule.
Automatic gearbox
This does not need an oil change.
Have the level checked by a
PEUGEOT dealer, according to the
manufacturer's servicing schedule.
Oil filter
Change the filter regularly, in accor
dance with the servicing schedule.
Fuel supply cutoff
In a serious collision, a mechanism
prevents fuel from reaching the
engine.
To reestablish the fuel supply:
 press the red button on the angle
of the front righthand suspension
assembly, under the bonnet..
Only use products
approved by Automobiles
PEUGEOT.
To ensure best perfor
mance from components as
important as the power steering
and the braking system,
PEUGEOT selects and offers
quite specific products.